• 한국전기전자재료학회논문지
• /
• 제22권11호
• /
• pp.980-986
• /
• 2009

In a triple-layered structure of ITO/N,N'-diph enyl-N,N'bis(3-methylphenyl)-1,1' - biphenyl-4,4'-diamine(TPD)/tris(8-hydroxyquinoline)aluminum($Alq_3$)/(2,9-Dimethyl-4,7-diphenyl-1,10-phenanthroline(BCP)/Al device, we have studied the electrical and optical characteristics of organic light-emitting diodes(OLEDs) depending on the deposition condition of BCP layer. Several different sizes of holes on boat and several different deposition rates were employed in evaporating the organic materials. And then, electrical properties of the organic light-emitting diodes were measured and the performance of the devices was analyzed. It was found that the hole-size of crucible boat and the evaporation rate affect on the surface roughness of BCP layer as well as the performance of the device. When the hole-size of crucible boat and the deposition rate of BCP are 1.2 mm and $1.0\;{\AA}/s$, respectively, average surface roughness of BCP layer is lower and the efficiency of the device is higher than the ones made with other conditions. From the analysis of current density-luminance-voltage characteristics of a triple layered device, we divided the conductive mechanism by four region according to applied voltage. So we have obtained a coefficient of ${\beta}_{ST}$ in schottky region is $3.85{\times}10^{-24}$, a coefficient of ${\beta}_{PF}$ in Poole-Frenkel region is $7.35{\times}10^{-24}$, and a potential barrier of ${\phi}_{FN}$ in Fower-Nordheim region is 0.39 eV.

• 대한한방소아과학회지
• /
• 제17권2호
• /
• pp.161-171
• /
• 2003

This study was to investigate the relationship of headache and back shape using the Moire interferometer and Questionnaire investigations. In this study the subjects consisted of 317 pupils[168 boys(53%), 149girls(47%)] attending S high school in Sungnamsi, Kyoungkido in 2002, and their ages ranged from sixteen to eighteen. The results are following. 1. In questionnaire investigation, we observed that the ratio of headache was more than 70% and the ratio of girls are more than that of boys. The inclination for ages was not shown. 2. In moire topography, the remainder values of scapular region were from 0.5 cm to 1.1 cm in boys, and from 0.45 cm to 1 cm in girls. The remainder values of gluteal region were from 0.2 cm to 0.8 cm in boys, and from 0.4 cm to 0.6 cm in girls. The reminder values of the vertical lines of cervical and buttock region were from 0.71 cm to 1.51 cm in boys, and from 0.96 cm to 1.43 cm in girls. More frequent findings of reminder value of the vertical lines of cervical and buttock region were observed that the vertical lines of cervical region were inclined to left than the vertical lines of buttock 3. Through the Pearson's Correlation analysis of headache and Moire topography, we found the close relationship of headache and the remainder values of scapular region(Pearson correlation coefficient : 0.116, P<0.05) and gluteal region(Pearson correlation coefficient : 0.153, P<0.01). But the relevances to headache and the remainder values of neck lines, sacral lines and neck-sacral lines were not found.

• 융합정보논문지
• /
• 제11권5호
• /
• pp.9-16
• /
• 2021

이진 변조 비직교 다중접속에서 1+1 용량 영역을 달성하는 주제에 대한, 다시 말해, 총 전력은 얼마나 필요한가와 이때 전력은 어떻게 할당해야 되는가에 대한 연구가 다소 미흡하다. 본 논문에서는, 허용 가능한 손실범위 안에서, 2PAM 비직교 다중 접속의 1+1 용량 영역을 달성할 수 있는 평균 총 전송 전력을 고찰한다. 다음으로, 충분한 평균 총 전력을 기반으로 1+1 용량 영역을 달성할 수 있는 전력 할당 계수를 계산한다. 그리고, 수치적 결과를 통해서 0.008 미만의 허용 가능한 손실 범위 안에서, 근접 1+1 용량 영역이 달성됨을 보여준다. 또한, 수치상으로 근접 1+1 용량 영역을 달성하는 양 사용자의 전력 할당 계수를 계산한다. 결론적으로 2PAM 비직교 다중 접속이 근접 1+1 용량 영역에서 동작하기 위해, 적절한 전력 할당과 함께, 적당한 총 전력이 비직교 다중접속 설계에서 계산될 수 있다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권5호
• /
• pp.57-65
• /
• 2022

본 연구에서는 smart ultra-high performance fiber reinforced concretes (S-UHPFRCs)의 자기감지 능력을 검증하기 위해 인장과 압축 영역에서 휨 하중에 따른 S-UHPFRCs의 전기역학적 거동을 조사하였다. 휨 하중 하에서 S-UHPFRCs의 전기저항률은 초기균열 이후 다수의 미세균열을 보이는 변형-경화 거동으로 인해 계속해서 변화된다. 압축 영역에서 S-UHPFRCs의 전기저항률은 등가 휨 응력이 증가함에 따라 976.57에서 514.05 kΩ-cm로 (47.00%) 감소하였으며, 인장 영역에서는 979.61에서 682.28 kΩ-cm로 (30.40%) 감소하였다. S-UHPFRCs의 응력 민감도 계수는 압축 영역과 인장 영역이 각각 1.709와 1.098 %/MPa이다. S-UHPFRCs의 처짐 감지 능력은 압축 영역 (30.06 %/mm)이 인장 영역 (19.72 %/mm)보다 높았다. 초기 처짐 감지 능력은 측정 영역과 관계없이 처짐 감지 능력의 약 50%로 초기 처짐에 대한 우수한 감지 능력을 가지는 것으로 확인되었다. 휨 하중 하에서 S-UHPFRCs의 자기감지 능력은 압축 영역에서 더 높았으나 S-UHPFRCs는 건설 현장에 적용할 자기 감지 재료로 충분하다.

• 한국방사선학회논문지
• /
• 제2권3호
• /
• pp.33-35
• /
• 2008

In the neutron capture experiment and calculation, the neutron absorption and scattering are very important. Especially these effects are conspicuous in the resonance energy region and below the thermal energy region. In the present study, we obtained energy dependent neutron absorption ratios of natural rhodium in energy region from 0.003 to 100 eV by MCNP-4B Code. The coefficients for neutron absorption was calculated for several types of thickness. In the lower energy region, neutron absorption is larger than higher region, because of large capture cross section (1/v). Furthermore it seems very different neutron absorption in the large resonance energy region. These results are very useful to decide the thickness of sample and shielding materials.

• 설비공학논문집
• /
• 제25권2호
• /
• pp.101-108
• /
• 2013

This paper is presented an experimental study of flow boiling heat transfer characteristics of ammonia, and is focused on pressure gradient and heat transfer coefficient of the refrigerant flow inside horizontal small tube with inner diameter of 3.0 mm and length of 2000 mm. The direct heating method is applied for supplying heat to the refrigerant, where the test tube is uniformly heated by electric current. The local heat transfer coefficients were obtained over a heat flux range of 20 to $80kW/m^2$, a mass flux range of 50 to $500kg/m^2s$, a saturation temperature range of 0 to $10^{\circ}C$, and quality up to 1.0. The pressure drops increase with increasing mass flux and heat flux, and with decreasing saturation temperature. The heat transfer coefficients increase with increasing mass flux and saturation temperature in middle and high quality region. And the local heat transfer coefficient increase with increasing heat flux in low quality region. The heat transfer coefficient of the experimental result was compared with six existing heat transfer coefficient correlation. A new boiling heat transfer coefficient correlation based on the superposition model for ammonia in small tubes is developed average deviation of -0.17% and mean deviation of 10.85%.

• 한국음향학회지
• /
• 제28권3호
• /
• pp.174-186
• /
• 2009

경계면이 존재하는 해양에서의 수중 음파 전달 모델링 시 일반적으로 평평한 경계면을 가정하고 Rayleigh가 제안했던 반사계수를 이용해 반사파를 계산할 수 있다. 하지만 해수면이나 해저면과 같은 실제 해양의 경계면은 불규칙적인 거칠기를 가진다. 이러한 경계면에서의 반사 손실은 실험식이나 산란 이론에 기반한 간섭 반사 계수를 계산하여 구할 수 있다. 본 논문에서는 섭동 이론, Kirchhoff 근사법, 작은 가지 근사법과 같은 산란 이론을 이용하여 유체-유체 경계면에 대한 간섭 반사 계수를 각각 유도한다. 이를 이용하여 임의의 거칠기를 가지는 해수면과 해저면에 대한 각 산란 이론의 간섭 반사계수를 계산하며, 이 결과를 Rayleigh 반사 계수와 비교하여 경계면의 거칠기에 따른 반사 손실을 분석한다. 또한, 섭동 이론과 Kirchhoff 근사법의 결과를 일반적으로 적용 범위가 넓은 작은 기울기 근사법의 결과와 비교하여 각 이론의 유효범위에 대해 고찰한다.

• 한국해양환경ㆍ에너지학회지
• /
• 제6권4호
• /
• pp.45-51
• /
• 2003

본 연구에서는 경계요소법을 이용하여 불투과성 사다리꼴형상 잠제에 의한 파랑의 반사율과 투과율을 이론적으로 수치해석 하였다. 해석기법으로는 유체와 투과성 영역을 동시에 해석할 수 있는 파압함수를 사용하였으며, 이론적으로 간단히 하기 위해, 투과성 영역내의 파랑의 운동은 선형소산계수와 부가질량계수를 도입하여 정식화하였다. 사다리꼴형상 잠제의 소파특성은 잠제의 법면경사의 변화에 대한 의존도가 높은 것을 알 수 있었다.

• 한국표면공학회지
• /
• 제46권6호
• /
• pp.264-270
• /
• 2013

Effects of preoxidation on high temperature wear of piercing plug tool steel sliding against SA210C steel used for production of seamless tube have been studied using a pin-on-disc CETR tribometer, under applied normal load of 20 N at $900^{\circ}C$ in air. It was found in the preoxidized pin specimens of piercing plug tool steel that the coefficient of friction decreased to about 0.4 at an initial stage followed by showing nearly constant value of about 0.4 during high temperature wear testing. On the other hand, it was also found in the pin specimens without preoxidation that the coefficient of friction increased and fluctuated, ranging from about 0.3 to 0.6 during the tests until the running period of about 800 sec. The compact and continuous Fe-oxide layer was formed on the contact surface of the preoxidized pin specimens after high temperature wear testing followed by penetrating along the grain boundaries of coarse ferrite in the decarburized region beneath the oxide layer due to the lower hardness of the region.

• 소성∙가공
• /
• 제21권3호
• /
• pp.207-214
• /
• 2012

High temperature deformation behavior of a $Ni_{30}Fe_{53}Co_{17}$ alloy, with its extraordinary low coefficient of thermal expansion less than $10{\times}10^{-6}K^{-1}$ at temperatures ranging from room temperature to 673K, was investigated by conducting a series of compression tests. From an empirical processing map, the appropriate working temperature-strain rate combination for optimum forming was deduced to be in the ~1373K, $10^{-2}s^{-1}$ region. This region has a relatively high power dissipation efficiency, greater than 0.36. Furthermore, open die forging of a 100mm diameter billets was performed to confirm the variation of thermo-physical properties in relation to microstructure. The coefficient of thermal expansion was found to increase considerably with increasing the open die forging temperature and decreasing the cooling rate, which in turn provides a drastic increase in the average grain size.