• 한국재난정보학회 논문집
• /
• 제15권2호
• /
• pp.249-258
• /
• 2019

연구목적: 본 연구에서는 서울 경기지역의 화강암을 대상으로 시추조사 시 채취된 암석 시료에서 측정된 물리적 특성 중 탄성파속도와 탄성계수로부터 암석의 일축압축강도와의 상관성을 분석하여 암석의 일축압축강도를 추정하는 것을 목적으로 한다. 연구방법: 119개의 화강암 시추 코아 시료를 대상으로 탄성파 속도와 탄성계수 그리고 일축압축강도와의 상관관계를 도출하기 위하여 실내 암석 실험을 실시하였다. 연구결과: 화강암에 대하여 탄성파속도와 일축압축강도 그리고 탄성계수와의 상호 관계를 단순회귀와 다중회귀로 분석한 결과는 전반적으로 관계식에 나타난 것처럼 신뢰도가 낮음을 확인하였다. 이는 화강암의 구성 입자가 균질하지 못하여 탄성파속도와 탄성계수를 이용한 압축강도 추정에 대한 활용성이 낮은 원인으로 사료된다. 결론: 본 연구에서 암석의 탄성파속도와 탄성계수로부터 일축압축강도를 추정하기 위한 상관관계를 분석하기 위하여 단순회귀분석과 다중회귀분석 방법을 이용하였다. 단순회귀분석은 결정계수($R^2$)가 0.61~0.67 이었으며, 다중회귀분석은 0.71로 나타났다. 따라서 다중회귀분석을 이용하여 암석의 일축압축강도를 추정할 때 다소 신뢰성이 높아질 수 있다. 또한, 향후 탄성파 속도와 탄성계수를 이용한 암석의 일축압축강도를 추정할 때 다양한 통계분석 기법(회귀분석, 인공신경망, 빅데이터 분석 등)을 활용하면 보다 신뢰성이 높은 결과를 얻을 수 있을 것으로 본다.

• 지질공학
• /
• 제15권1호
• /
• pp.9-17
• /
• 2005

본 연구는 전라남도 장성군 일대의 석회암지대에서 강우로 인해 파괴된 절개사면을 대상으로 시료를 채취하여 물리적ㆍ역학적 특성을 파악하고 강우로 인한 사면 안정 해석을 통해 사면구배의 변화에 따른 안전율의 변화를 규명하였다. 연구지역 석회암 풍화토는 석영, 정장석, 깁사이트, 침철석 등으로 구성되어 있고 비중은 2.73, 통일분류상 SC에 해당되며 모암에서 풍화가 진행되면서 칼슘성분이 현저하게 감소하였다. 투수계 수는 2.56×10/sup -4/ cm/ sec 로서 실트 성 점토의 투수계수와 비슷한 값을 보였고 전단시험결과 불포화토에서 포화토로 변할수록 점착력은 3.0 t/㎡에서 0.72 t/㎡로 현저하게 줄어들며 내부마찰각 Φ 값도 감소하는 경향을 보였다. 강우로 인한 사면안정 해석시 강우강도를 고려한 침투심도를 구하는 것이 합리적이며 사면안정해석결과 침투심도가 클수록 사면의 안전율은 낮아져서 불안정하게 되고 침윤선을 고려한 절토사면의 최소안전율 1.5와 비교 시 강우를 고려한 석회암 풍화토의 절토사면 구배는 1 ： 1.2이상 되어야 안전율을 만족하는 것으로 나타났다. 또한, 불포화토에서 포화토로 변할수록 점착력의 감소는 사면의 안전율감소에 많은 영향을 미침을 알 수 있었다.

• 대기
• /
• 제34권1호
• /
• pp.69-81
• /
• 2024

In this paper, Annual flux variations in the Boseong Tall Tower (BTT) from 2016 to 2020 were analyzed using data from three levels (2.5 m, 60 m, and 300 m). BTT was installed in Boseong-gun, Jeollanam-do in February 2014 and continued to conduct energy exchange observations such as CO2, sensible heat, and latent heat using the eddy covariance method until March 2023. The BTT was located in a very flat and uniform paddy field, and flux observations were conducted at four levels: 2.5 m, 60 m, 140 m, and 300 m above ground. Surface energy balance was confirmed from observed data of net radiation flux, soil heat flux, sensible heat flux, and latent heat flux. Additionally, 2.5 m height surface fluxes, which are most influenced by agricultural land, were compared with data from Local Data Assimilation and Prediction System (LDAPS) of the Korea Meteorological Administration to evaluate the accuracy of LDAPS flux data. The correlation coefficient between LDAPS flux data and observed values was 0.95 or higher. Excluding summer latent heat flux data, there was a general tendency for LDAPS data to be higher than observed values. The footprint areas estimated below 60 m height mainly covered agricultural land, and flux observations at 2.5 m and 60 m heights showed typical agricultural characteristics. In contrast, the footprint estimated at 300 m height did not show agricultural characteristics, indicating that observations at this height encompassed a wide range, including mountains, sea, and roads. The analysis results of long-term flux observations can contribute to understanding the energy and carbon dioxide fluxes in agricultural fields. Furthermore, these results can be utilized as essential data for validating and improving numerical models related to such fluxes.

• 박물관보존과학
• /
• 제2권
• /
• pp.57-68
• /
• 2000

청주 사뇌사지에서 출토된 청동기 12점에 대한 과학 분석을 실시하였다. 이들 각 시료의 금속조직에 나타난 결정 입자의 형태, 크기, 분포와 관련하여 검토한 결과 식기류, 제기류, 타명기류로 나타났는데 성분조성에 따른 분류 결과와도 일치하였다. 식기류는 주로 단조품으로서 성분조성비는 Cu:Sn:Pb≃8:2:0, 제기류는 주조품으로서 Cu:Sn:Pb≃7:1:2, 타명기류는 Cu:Sn:Pb≃85:10:5/9:1:0이었다. 즉, 원료의 배합비는 제품의 용도 및 제작방볍과 밀접한 관계가 있다는 것을 알 수 있었다. Cu와 상관계수가 높은 원소는 Co, Fe, As이었는데 이는 Cu 광물에 불순물로 함께 분포한다는 것을 의미하며 As 함량은 식기류, 제기류, 타명기류 순으로 증가한다는 것을 알 수 있었다. 또한 납 함유량이 높은 청동기 3점의 납동위원소비를 분석하고 원료의 산지를 추정한 결과 일본·중국산 납을 사용한 것으로 나타났다. 땜납의 성분조성은 Cu:Sn:Pb≃83:12:5이었으며 Pb의 결정이 작고 고르게 분포하고 있었다.

• 한국유기농업학회지
• /
• 제25권1호
• /
• pp.135-148
• /
• 2017

본 연구를 통해 논, 시설재배 밭 토양, 쓰레기장, 하천 및 호수의 퇴적 토양 등 22개소에서 분리한 총 6종의 광합성세균 중 호기 암 배양이 가능한 Rhodobacter sphaeroides PS-24를 분리하였다. 형태학적 특징으로는 그람음성의 막대모양으로, 운동성이 있었다. 분리균주의 16S rRNA 염기서열을 분석한 결과 Rhodobacter sphaeroides ATH2.4.1과 99%의 상동성을 나타내었으며, 본 연구에서 Rhodobacter spharoides PS-24로 명명하여 연구를 수행하였다. 선별균주를 modifed Van niel's yeast 배지에서 배양 후 생성된 carotenoid를 추출한 결과 $12.03{\pm}0.15mg/L$의 함량이 측정되었으며, 반응표면분석법 중 Plackett burman 분석방법과 Box-Behnken 분석방법을 통해 carotenoid 생산에 영향을 미치는 요인을 분석하고 농도를 최적화하였다. 분석결과 각각의 독립변수 yeast extract -0.4144 (1.23 g/L), $Na_2CO_3$ 0.8541 (3.71 g/L)와 $MgSO_4$ 1.00 (1.00 g/L)의 농도를 선정하였으며, 이를 바탕으로 배지 조성을 최적화한 결과 yeast extract 1.23 g, sodium acetate 1 g, $NH_4Cl$ 1.75 g, NaCl 2.5 g, $K_2HPO_4$ 2 g, $MgSO_4$ 1.0 g, mono-sodium glutamate 7.5 g, $Na_2CO_3$ 3.71 g, $NH_4Cl$ 3.5 g, $CaCl_2$ 0.01 g/ liter로 선정하였다. 최적배지를 대상으로 5 L, 50 L, 500 L scale-up을 진행한 결과 최종 carotenoid는 각각 17.98 mg/L, 18.03 mg/L, 18.11 mg/L로 조사되었다. 최적배지의 경우 modified Van niel's yeast 배지보다 약 1.5배 많은 carotenoid를 생산하였으며, 대량배양을 통한 scale-up 과정 시 carotenoid의 생산량은 크게 변화하지 않는 것으로 조사되었다. 따라서 본 연구를 바탕으로 산업적으로 다양하게 사용되고 있는 carotenoid를 생산하는 광합성세균 Rhodobacter spharoides PS-24를 개발하였으며, 본 연구를 바탕으로 유기농축산에 사용이 가능한 기능성 미생물제제를 개발하고자 한다.

• 한국환경과학회지
• /
• 제19권5호
• /
• pp.647-653
• /
• 2010

The objectives of this research are to evaluate and compare the oxygen transfer coefficients($K_{La}$) in both a general bubbles reactor and a micro-nano bubbles reactor for effective operation in sewage treatment plants, and to understand the effect on microbial kinetic parameters of biomass growth for optimal biological treatment in sewage treatment plants when the micro-nano bubbles reactor is applied. Oxygen transfer coefficients($K_{La}$) of tap water and effluent of primary clarifier were determined. The oxygen transfer coefficients of the tap water for the general bubbles reactor and micro-nano bubbles reactor were found to be 0.28 $hr^{-1}$ and 2.50 $hr^{-1}$, respectively. The oxygen transfer coefficients of the effluent of the primary clarifier for the general bubbles reactor and micro-nano bubbles reactor were found be to 0.15 $hr^{-1}$ and 0.91 $hr^{-1}$, respectively. In order to figure out kinetic parameters of biomass growth for the general bubbles reactor and micro-nano bubbles reactor, oxygen uptake rates(OURs) in the saturated effluent of the primary clarifier were measured with the general bubbles reactor and micro-nano bubbles reactor. The OURs of in the saturated effluent of the primary clarifier with the general bubbles reactor and micro-nano bubbles reactor were 0.0294 mg $O_2/L{\cdot}hr$ and 0.0465 mg $O_2/L{\cdot}hr$, respectively. The higher micro-nano bubbles reactor's oxygen transfer coefficient increases the OURs. In addition, the maximum readily biodegradable substrate utilization rates($K_{ms}$) for the general bubbles reactor and micro-nano bubbles reactor were 3.41 mg COD utilized/mg active VSS day and 7.07 mg COD utilized/mg active VSS day, respectively. The maximum specific biomass growth rates for heterotrophic biomass(${\mu}_{max}$) were calculated by both values of yield for heterotrophic biomass($Y_H$) and the maximum readily biodegradable substrate utilization rates($K_{ms}$). The values of ${\mu}_{max}$ for the general bubbles reactor and micro-nano bubbles reactor were 1.62 $day^{-1}$ and 3.36 $day^{-1}$, respectively. The reported results show that the micro-nano bubbles reactor increased air-liquid contact area. This method could remove dissolved organic matters and nutrients efficiently and effectively.

• Investigative Magnetic Resonance Imaging
• /
• 제25권2호
• /
• pp.93-100
• /
• 2021

Purpose: (1) To evaluate the trabecular pattern at the femoral attachment of the posterior cruciate ligament (PCL) in patients with a PCL injury; (2) to analyze bone microarchitecture by applying gray level co-occurrence matrix (GLCM)-based texture analysis; and (3) to determine if there is a significant relationship between bone microarchitecture and posterior instability. Materials and Methods: The study included 96 patients with PCL tears. Trabecular patterns were evaluated on T2-weighted MRI qualitatively, and were evaluated by GLCM texture analysis quantitatively. The grades of posterior drawer test (PDT) and the degrees of posterior displacement on stress radiographs were recorded. The 96 patients were classified into two groups: acute and chronic injury. And 27 patients with no PCL injury were enrolled for control. Pearson's correlation coefficient and one-way ANOVA with Bonferroni test were conducted for statistical analyses. This protocol was approved by the Institutional Review Board. Results: A thick and anisotropic trabecular bone pattern was apparent in normal or acute injury (n = 57/61;93.4%), but was not prominent in chronic injury and posterior instability (n = 31/35;88.6%). Grades of PDT and degrees of posterior displacement on stress radiograph were not correlated with texture parameters. However, the texture analysis parameters of chronic injury were significantly different from those of acute injury and control groups (P < 0.05). Conclusion: The trabecular pattern and texture analysis parameters are useful in predicting posterior instability in patients with PCL injury. Evaluation of the bone microarchitecture resulting from altered biomechanics could advance the understanding of PCL function and improve the detection of PCL injury.

• 생약학회지
• /
• 제41권2호
• /
• pp.147-152
• /
• 2010

The capability of the solvents for extracting the bioactive saponins from the roots of Platycodon grandiflorum (Campanulaceae) was investigated to obtain an ideal extract which contained bioactive saponins with high quality and high quantity. The content of eight representative saponins in extracts, such as deapioplatycoside E, platycoside E, platyconic acid A and platycodin D, platycodin $D_3$, platycodin $D_2$, polygalacin $D_2$, polygalacin D were analyzed simultaneousely by the modified HPLC analytical method. The validation test of the modified qualitative and quantitative analytical method employing the ELSD equipped HPLC for eight representative saponins in the roots extract of P. grandiflorum showed a good linearity, precision and accuracy. the correlation coefficient ($r^2$) values of the calbration curves for each saponins were observed to be over 0.9990. LOD and LOQ of each saponin was calculated as $0.10{\mu}g{\sim}0.40{\mu}g$ (LOD) and $0.40{\mu}g{\sim}0.80{\mu}g$ (LOQ), respectively. Recovery rates of each saponin were also calculated as over 98%, respectively. With exception of two saponins, platyconic acid A and platycodin D, The content of eight saponins in extracts was decreased proportionally to the increment of the water ratio of solvent for extraction. Consequently, as aquous alcohol was used as a solvent for extracting the saponin components from powdered roots of P. grandiflorum, the water content in the aquous alcohol was seemed to be a critical factor for extracting efficacy. The 60-80% ratio of alcohol in the aquous alcohol were deduced to be suitable and recommendable for the preparation of roots extract of P. grandiflorum which contained saponins with high quality and high quantity.

• 한국표면공학회지
• /
• 제38권3호
• /
• pp.106-111
• /
• 2005

Ternary Ti-B-C coatings were synthesized on WC-Co and Si wafers substrates by a PECVD technique using a gaseous mixture of $TiCl_4,\;BCl_3,\;CH_4,\;Ar,\;and\; H_2$. The effects of deposition variables such as substrate temperature, gas ratio, $R_x=[BCl_3/(CH_4+BCl_3)]$ on the microstructure and mechanical properties of Ti-B-C coatings were investigated. From our instrumental analyses, the synthesized Ti-B-C coatings was confirmed to be composites consisting of nanocrystallites TiC, quasi-amorphous TiB2, and amorphous carbon at low boron content, on the contrary, nanocrystallites $TiB_2$, quasi-amorphous TiC, and amorphous carbon at relatively high boron content. The microhardness of the Ti-B-C coatings increased from $\~23 GPa$ of TiC to $\~38 GPa$ of $Ti_{0.33}B_{0.55}C_{0.11}$ coatings with increasing the boron content. The $Ti_{0.33}B_{0.55}C_{0.11}$ coatings showed lower average friction coefficient of 0.45, in addition, it showed relatively better wear behavior compared to other binary coatings of $TiB_2$ and TiC. The microstruture and microhardness value of Ti-B-C coatings were largely depend on the deposition temperature.

• 한국대기환경학회지
• /
• 제27권5호
• /
• pp.545-557
• /
• 2011

The objective of this study was to estimate the trends of each pollutant using the air pollution monitoring networks data from January 2005 to December 2008 in Daegu area. Also, the spatial characteristics of each pollutant were determined using the Pearson correlation coefficients and COD (coefficients of divergence). In this study, the trends of hourly, monthly, seasonal, and total average concentrations of each pollutant for the 10 sites were analyzed. The Ihyeon site showed highest concentration for the $SO_2$, $NO_2$, and PM10}. In the case of $O_3$, the Jisan site showed highest concentration among the other sites. Also, industrial area presented highest concentration for the $SO_2$, CO, and PM10. On the other hand, $NO_2$ showed highest in commercial area. The IDW (inverse distance weighting) method was used to estimate characteristics of spatial distribution. The results provide identify spatial distribution for each pollutant. Also, the Pearson correlation coefficients and COD values provide spatial variability among the monitoring sites. The COD of each pollutant showed very low values for all of the sites pairs. On the other hand, the Pearson correlation coefficients showed high values for all of the sites pairs. Finally, analysis of spatial variability can be used to characterize the spatial uniformity and similarity of concentrations from each pollutant.