• 한국산학기술학회논문지
• /
• 제16권12호
• /
• pp.8812-8819
• /
• 2015

콘크리트 궤도 건설의 증가로 인한 레일 체결장치의 중요성이 커지고 있는 상황에서 최근 레일 체결장치의 부속품인 텐션클램프가 절손되는 사고가 발생되었다. 이는 현장상태, 운영기관, 열차운행조건 및 빈도 등 다양한 요인에 의한 것으로 텐션클램프의 거동관련 연구가 필요하다. 본 논문에서는 실내실험 및 유한요소해석을 통해 텐션클램프의 역학적 거동을 분석하였다. 실내실험을 수행하여 텐션클램프 체결력에 따른 응력 및 변위를 도출하고 이를 유한요소해석 결과와의 비교를 통해 해석 모델을 검증하였다. 또한 검증된 모델을 적용하여 열차 하중에 따른 텐션클램프의 변형과 응력을 도출하고, 응력 분석을 통해 텐션클램프의 피로에 대한 취약도를 파악하였다.

• 한국포장학회지
• /
• 제23권3호
• /
• pp.183-190
• /
• 2017

Carton clamp truck is widely perceived as the high-efficient handling equipment of factory premises and warehouse by its capability of palletless handling. Therefore, the significance of a lab-based handling simulation is becoming higher with the growth of clamp truck usage. In this study, preliminary FEA and design of handling test courses for the lab-based simulation of carton clamp truck handling were performed, and the PSD analyses were performed for the modified one for the test course proposed by Park et al. (2017) as well as ASTM D 6055 and ISTA 3B standards. For the vibration in all directions, the vibration energy intensity analyzed by ISTA 3B standard showed higher than that by the other two cases. A FEA was performed for the handling operation of the sudden stop of the clamps after lifting the target HCP (heavyweight refrigerator corrugated package, w=180 kgf) up to the specified height. The slip distance between the clamp arm and the target HCP was 0.85 mm. The simulation result of 0.85 mm was 3.7 times lower than the experimental result (3.2 mm) obtained by Park et al. (2017), and it was estimated that the deviation comes from both the experimental error by weight imbalance of target HCP, and excessive simplification during the FE modelling of target HCP.

• 동력기계공학회지
• /
• 제13권6호
• /
• pp.117-122
• /
• 2009

The wedge type rail clamp compresses the rails with small clamping force at first, and with large clamping force when the wind speed increases because of the wedge working. If the supporter is not installed in the rail clamp with V-type wedge when the wind speed increases more and more, the structure will occur overload which leads the structure to fracture. But in the clamp with U-type wedge the supporter is not necessary because the tangential angle of the wedge increases as the sliding distance increases. The proper shape of U-type wedge is determined by the initial clamping force and the tangential angle of the wedge. Accordingly we, first carry out the finite element analysis in order to analyze the relation between the sliding distance and the wedge angle. Next we suggest the proper shape of U-type wedge as analyze the relation between the radius of curvature and the sliding distance.

• 한국균학회지
• /
• 제2권1호
• /
• pp.31-33
• /
• 1974

1. 표고균(菌)의 교배계(交配系)에 대(對)해서는 기히 여러 연구자(硏究者)에 의해 4극성(極性)의 교배형(交配型)이 보고 되여 있는 바와 같이 본 시험에서도 동일(同一)한 결과(結果)를 보였다. 2. 본(本) 시험(試驗) 교배계간(交配系間)에는 어떤 계통(系統) 혹(或)은 단포자간(單胞子間)에든 Clamp 형성(形成)이 되었다. 3. 비교적(比較的) 근친계(近親系)라고 볼 수 있는 계통간(系統間)에는 (뉴기니아 계통간에) Clamp 형성량(形成量)도 적고 균계발육(菌系發育)도 부진(不進)하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1517-1520
• /
• 2003

In this paper, we design a wedge type rail-clamp which can protect container crane from wind with constant clamping force regardless of the operating period. When we design wedge type rail clamp, it is important to determine the weight for locker to descent smoothly with an initial clamping force of rail and pad. Therefor, this paper suggest a process to decide a wright within proper range which could be obtained using FEA of wedge type rail clamp.

• International Journal of Safety
• /
• 제7권1호
• /
• pp.21-25
• /
• 2008

The occurrence of a corona is that electrical discharge due to the heterogeneity that occurs when an electrical field is concentrated in an electrode due to a cusp formed on said electrode. Wire treatment at the end of a 154kV dead end clamp for end users accelerates the occurrence of corona, which in turn leads to power loss and noise. In this study, the characteristics of the corona which occurs between porcelain insulators and support clamps of overhead lines used in l54kV power receiving facilities for end users were investigated. The corona, which cannot be identified by one common method, was measured utilizing a UV image camera. A risk assessment for fire damage and its status was suggested. The stress distribution of the electrical field by length of bare wire was suggested by means of the finite element method (FEMLAB). As a result, it was found to affect a porcelain insulators. These results can be utilized for the enhancement of clamp installation and safety in power facilities.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.306-307
• /
• 2014

진공용 장비의 sealing 방법으로 Cu gasket을 이용한 CF type과 O-ring을 이용한 NW type이 있다. 이중 O-ring을 이용한 sealing 방법에는 clamp를 사용하게 되는데 Al 합금으로 제작된 clamp에 bellows의 수축 시 받는 전단응력과 전단응력한계 이상의 힘을 받았을 때의 clamp 파손에 따른 역압에 의한 TMP 손상 분석.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권3호
• /
• pp.227-231
• /
• 2008

A latchup-free design based on the lateral diffused MOS (LDMOS) adopting the "Darlington" approaches was designed. The use of Darlington configuration as the trigger circuit results in the reduction of the size of the circuit when compared to the conventional inverter driven RC-triggered MOSFET ESD power clamp circuits. The proposed clamp was fabricated using a $0.35{\mu}m$ 60V BCD (Bipolar CMOS DMOS) process and the performance of the proposed clamp was successfully verified by TLP (Transmission Line Pulsing) measurements.

• Journal of Power Electronics
• /
• 제4권2호
• /
• pp.87-95
• /
• 2004

A new fast-response high-current clamp DC-DC converter circuit design is presented that will meet the requirements and features of the new generation of microprocessors and digital systems. The clamp in the proposed converter amplifies the current in case of severe load changes and is able to produce high slew rate of output current and capability to keep constant the output voltage. This proposed high-current clamp technique is theoretically loss less, low cost and easy to implement with simple control scheme. This is modified from a basic buck topology by replacing the output inductor with two magnetically coupled inductors. Inductors are difference in inductance, one has large inductance and other has small inductance. The inductor with small inductance will take over the output inductor during fast load transient. It speedup the output current slew rate and reduce the output voltage drop in the case of heavy burden load changes.

• Journal of Power Electronics
• /
• 제9권1호
• /
• pp.26-35
• /
• 2009

A high efficiency active clamp sepic-flyback converter is presented for fuel cell generation systems. The proposed converter is a superposition of a sepic converter mode and. flyback converter mode. The output voltages of the sepic converter mode and flyback converter mode can be regulated by the same PWM technique with constant frequency. By merging the sepic and flyback topologies, they can share the transformer, power MOSFET and active clamp circuit. The result has outstanding advantages over conventional active clamp DC-DC converters: high efficiency, high power density, and component utilization. Simulation results and experimental results are presented to verify the principles of operation for the proposed converter.