• Journal of the Korean institute of surface engineering
• /
• v.21 no.4
• /
• pp.149-159
• /
• 1988

Electrodeposition of chromium from low concentration chromjum (III) sulfate complexess in aqueous using sodium formate-glycine mixtures as a complexing agent was studied. In the bath formation, it is found that the optimum again temperature and time for equilibration of the electrolytes are nrcessary for 24 hrs at 45$^{\circ}C$and the optimum elecrical charge for low current electrolysis which might be produced Cr(II) ions in the electrolytes is necessary for minum 2Ah/$\ell$. The optmun concentration off standard electrolyte for main composition is 0.05M chromium(III) sulfate, 0.2M sodium formate-0.2M glycine, and I mMNaSCN as a catalysea, respectivwly. The standard electrolyte is shows good covering, good throwing power, and 6% of current efficiency (Cr(III)basis). The oppearance of electrodeposits shows att active bright chromium. The SEM morphology of the chromjum coating is observed as smooth surfaces and dispersed micro prcro pores. X-ray diffraction analysis shows a bcc structure which the perferred orintation of the chromium electrodeposits is strongin(200)plane.

• Journal of the Korean institute of surface engineering
• /
• v.21 no.4
• /
• pp.160-167
• /
• 1988

Electrochemical behaviors od chromium electrodeposition from 0.05M chromium (III) sulface complexes in aqueous solutions using sodium formate-glycine mixtures as a complexing agent were studied. In the cathodic current-potential cures, it is found that the intial limiting current of Cr(III) is proportional to square root of scan rate and activiation energy from Arrhenius plot is s obtained 3.05Kcal/mol. From this results, the reaction is considered, Cr3++e longrightarrow Cr2+, which is controlled diffusion of Cr (III). It is also found that the chromium is deposited when the potential reaches to hydrogen evolution potential. Effects of NaSCN as a catalyser in the electrolyte were investigated NCS- anion seems to react strongly by specific absorption at the inner HelmholtZ layer, so that, it is considered to suppress the electrodeposition reaction reaction for chromjum, and also it is considered multipe-bridge such as Cr(III)-NCS---M(M;cathode).

• Journal of Welding and Joining
• /
• v.16 no.2
• /
• pp.73-83
• /
• 1998

This study investigated the relationships between the microstructure and the wear resistance of hardfaced iron/chromium alloys to examine the low stress abrasive wear mechanism. The effects of volume fraction of reinforcing phases(chromium carbide and eutectic phase) were studied. The alloys were deposited once or twice on a mild steel plate using a self-shielding flux cored arc welding process. The low stress abrasion resistance of he alloys against dry sands was measured by the Dry Sand/Ruber Wheel Abrasion Tester (RWAT). The wear resistance of hypoeutectic alloys, below 0.36 volume fraction of chromium-carbide phase (VFC), behaved as Equal Pressure Mode (EPM) for the inverse rule of mixture whereas the wear resistance of hypereutectic alloys, above 0.36 VFC, represented Equal Wear Mode (EWM) for the linear rule of mixture.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.3
• /
• pp.175-178
• /
• 2004

The size and number of nano-size defects of thin trivalent chrome layers were determined by small angle neutron scattering (SANS) without breaking the thin chrome layers. Most of defect size of the trivalent chromium prepared in this test conditions is in the range of about 40nm. The number of nano-size defects less than about 40nm of the trivalent chromium layer increases with plating voltage at constant current density From this study, SANS is proved as one of useful techniques to evaluate nano-size defects of thin film layer.

• Analytical Science and Technology
• /
• v.16 no.1
• /
• pp.25-31
• /
• 2003

Chromium(III) picolinate, a highly bioavailable compound, is known to be used for supplementing essential chromium(III) to human beings and animals. Two different methods were used to synthesize chromium(III) picolinate. The synthetic products were characterized by elemental analysis, FTI-IR, high performance liquid chromatography (HPLC) and MALDI-MS.

• Nuclear Engineering and Technology
• /
• v.51 no.1
• /
• pp.84-94
• /
• 2019

Aluminum substrates are irradiated with chromium ions and the steam condensation heat transfer performance on these surfaces is examined. Filmwise condensation is induced on the surface of aluminum specimens irradiated with chromium ion dose of less than $10^{16}ions/cm^2$ while dropwise condensation occurs on the specimens irradiated with chromium ion dose of $5{\times}10^{16}ions/cm^2$ in the range of ion energy from 70 to 100 keV. The heat transfer coefficient of the surfaces on which dropwise condensation occurs appeared to be approximately twice as much as the prediction by Nusselt's film theory. In a durability test, dropwise condensation lasts over six months and the heat transfer coefficient is also maintained.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.5
• /
• pp.692-698
• /
• 2005

Two experiments were conducted to examine the effect of graded levels of dietary chromium and leucine, and different fat sources on performance and body composition of broiler chickens. The results showed that chromium picolinate at 0.5 ppm significantly (p<0.05) lowered the carcass fat level. Gut weight and carcass water content were increased as a result of chromium treatment. Body weight, plucked weight, carcass weight, abdominal fat pad weight, breast yield and feed efficiency were unaffected by chromium treatment. Leucine did not interact with chromium to effect lean growth. Dietary leucine above the recommended maintenance level (1.2% of diet) markedly (p<0.001) reduced the breast muscle yield. The addition of fish oil to broiler diets reduced (p<0.05) the abdominal fat pad weights compared to birds on linseed diets. Fish oil is believed to improve lean growth through the effects of long chain polyunsaturated fatty acids in lowering the very low-density lipoprotein levels and triglyceride in the blood, in the meantime increasing glucose uptake into the muscle tissue in blood and by minimizing the negative impact of the immune system on protein breakdown. The amount of fat in the diet (2% or 4%) did not affect body composition.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.4
• /
• pp.547-554
• /
• 2012

Chromium is generated from several industrial processes. It occurs in different oxidation states, but Cr(III) and Cr(VI) are the most common ones. Cr(VI) is a toxic, soluble environmental contaminant. Some bacteria are able to reduce hexavalent chromium to the insoluble and less toxic Cr(III), and thus chromate bioremediation is of considerable interest. An indigenous chromium-reducing bacterial strain, Rb-2, isolated from a tannery water sample, was identified as Ochrobactrum intermedium, on the basis of 16S rRNA gene sequencing. The influence of factors like temperature of incubation, initial concentration of Cr, mobility of bacteria, and different carbon sources were studied to test the ability of the bacterium to reduce Cr(VI) under variable environmental conditions. The ability of the bacterial strain to reduce hexavalent chromium in artificial and industrial sewage water was evaluated. It was observed that the mechanism of resistance to metal was not due to the change in the permeability barrier of the cell membrane, and the enzyme activity was found to be inductive. Intracellular reduction of Cr(VI) was proven by reductase assay using cell-free extract. Scanning electron microscopy revealed chromium precipitates on bacterial cell surfaces, and transmission electron microscopy showed the outer as well as inner distribution of Cr(VI). This bacterial strain can be useful for Cr(VI) detoxification under a wide range of environmental conditions.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2001.10a
• /
• pp.121-122
• /
• 2001

According to the epidemiological studies in chromium workers, hexavalent chromium is associated with the risk of lung cancer. Genotoxicity such as chromosome aberration, and cellular oxidative damages by reactive oxygen species produced by hexavalent chromium exposure may play an important role in the carcinogenesis process. We investigated the availabilities of several kinds of biological markers to assess the genotoxicity and oxidative damages from chromium exposure in Korean chromium plating workers.(omitted)

• YAKHAK HOEJI
• /
• v.52 no.5
• /
• pp.361-369
• /
• 2008

In order to evaluate the cytotoxicity of chromium trioxide, and the cell regenerative effect of phenolic acid against chromium trioxide-induced cytotoxicity, cell viability, cell adhesion activity, lactate dehydrogenase (LDH) activity, and morphological changes of cells were performed in these cultures. The toxicity of chromium trioxide (${IC}_{50}$, 44.0 ${\mu}M$) was high according to the toxic criteria. Cell regeneration of benzoic acid derivatives against ${IC}_{50}$ value of chromium trioxide in cell morphology was increased in concentration-dependent manner. These results suggest that benzoic acid derivatives may be used as a cell regenerative agent against chromium-mediated cytotoxicity.