• Journal of Animal Environmental Science
• /
• v.17 no.sup
• /
• pp.43-50
• /
• 2011

This study was conducted to verify the effect of chlorine dioxide ($ClO_2$) on odor reduction at a commercial swine facility consisting of a windowless piglet barn and a grower/fattening barn. The windowless piglet barn used a duct ventilation system. Air velocity at very below the upper duct was 4.53 m/s. Air velocity at the lower space around the living space of pigs in the grower/fattening barn was 0.26 m/s. $NH_3$ concentration was around 9ppm and less than 3 ppm before and after the $ClO_2$ spraying, respectively, which was over 70% reduction. There was no $H_2S$ detection. $NH_3$ concentrations measured in the windowless grower/fattening barn and at the exhausted air were 26 ppm and 11ppm, respectively. $NH_3$ concentration at a biocurtain outside was less than 1 ppm. Hence, $ClO_2$ spraying at windowless barns was effectively decreased malodor such as $NH_3$.

• The Korean Journal of Food And Nutrition
• /
• v.31 no.1
• /
• pp.127-134
• /
• 2018

To prolong the shelf-life of chicken breast meat, samples were treated with gel packs containing slow-released chlorine dioxide ($ClO_2$) gas at 7~15 ppm for eight days at $4^{\circ}C$. The microbial, physicochemical properties and sensory evaluation of the treated samples were investigated. The total number of bacteria in the control increased during storage and showed 6.78 log CFU/g on the 8th day of storage, but $ClO_2$ gas treatments showed 6.24~6.58 log CFU/g at the same time. The initial pH of chicken breast meat was 6.00 and gradually increased during storage. And $ClO_2$ gas treatments did not show any significant difference from the control during storage period, but maintained a generally lower pH than that of the control. The lightness, redness, and yellowness during storage were not significantly different between the control and the 7~10 ppm $ClO_2$ gas treatments. However, as the storage period was increased, the redness of 15 ppm $ClO_2$ gas treatment was reduced. The cooking loss and shear force were not different between the control and $ClO_2$ gas treatments during the storage period. Volatile basic nitrogen (VBN) increased in the control from the 6th day of storage and 23.80 mg% in the 8th day of storage. However, VBN of $ClO_2$ treatments showed lower than that of the control. In the change of sensory evaluation during storage, 10 ppm $ClO_2$ treatment showed the highest preference in odor, appearance and overall acceptance during storage period.

• Food Science and Preservation
• /
• v.21 no.4
• /
• pp.468-472
• /
• 2014

The effect of pre-storage treatments was investigated to control the occurrence of fruit skin stain in 'Niitaka' pears. The incidence of fruit skin stains was significantly reduced when the fruits were stored in paper bags with a yellow inner color, compared to when they were stored in paper bags with blue and red inner colors. Additionally, the pear fruits that were harvested seven days earlier than their optimum maturity date developed less fruit skin stains in cold storage and retained their quality. Storage in polyethylene (PE) bags did not control the occurrence of fruit skin stains as effectively as did bag-free storage or storage in calcium-coated bags. The dipping of the pear fruits in a chlorine dioxide and calcium solution was highly effective in reducing the fruit skin stains compared to when they were not dipped or when they were dipped only in distilled water. In particular, a 1,500 times diluted solution of sodium dichloroisocyannurate (NaDCC) reduced the incidence of fruit skin stains and the size of the lesions. No stain was observed on the skin of the fruit with a water content lower than 67.7% (w/v) during its storage. In conclusion, packaging pear fruits in bags with an inner calcium coat and dipping them in a chlorine dioxide, calcium, or NaDCC solution can effectively reduce their skin stains during their storage.

• Journal of Animal Environmental Science
• /
• v.18 no.sup
• /
• pp.1-6
• /
• 2012

This study was conducted to verify the effect of chlorine dioxide ($ClO_2$) on odor reduction at a commercial swine facility consisting of a compost ficility. Compost facility in $NH_3$ concentration was around 550 ppm and less than 78 ppm before and after the $ClO_2$ spraying, respectively, which was over 86% reduction. There was no H2S detection. $NH_3$ concentration was around 420 ppm and less than 35 ppm before and after the $ClO_2$ spraying, respectively, which was over 83% reduction. $H_2S$ concentration was around 210 ppb and less than 32 ppb before and after the $ClO_2$ spraying, respectively, which was over 85% reduction. Hence, $ClO_2$ spraying at windowless barns was compost facility decreased malodor such as $NH_3$.

• Journal of Food Hygiene and Safety
• /
• v.29 no.2
• /
• pp.117-122
• /
• 2014

Rice can be the contaminating with soil-borne bacteria. Furthermore, the contaminated bacteria can be grown during immersion process for produce wet-milled rice flour. Therefore, disinfectants can be added during the immersion process. Antibacterial activities of the natural disinfectant, fermented rice spent water (FRSW), and the chemical disinfectants, chlorine dioxide (CD) and sodium benzoate (SB), were respectively determined when added in pure cultures of target bacteria such as Salmonella typhimurium, Escherichia coli, and Bacillus cereus or when added to immersion water in the immersion process. In addition, rinsing effects for removing bacteria were determined when rice was rinsed with water before and after the immersion process. Antibacterial activities were rapidly increased as increasing amounts of the disinfectants are added to the pure cultures of the target bacteria. Antibacterial activity of CD was the most effective among the three tested disinfectants when added to the pure cultures of the target bacteria, respectively. Those of the same disinfectants were increased when they were increasingly added to the immersion water. However those of the disinfectants were less effective when added to the immersion water. On the other hand, rinsing effects for removing bacteria were the most effective when rice was rinsed only with water without the immersion process. Collectively, rinsing rice with water only was more effective than using disinfectants in the immersion water during rice flour production.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.1
• /
• pp.1-7
• /
• 2023

Chlorine dioxide (ClO₂) is widely used for post-harvest sterilization treatment. However, there are limitations in the retail application of ClO₂ due to difficulties in handling, expensive facilities, and safety concerns. Therefore, it is necessary to develop a ClO₂ technology that can be easily applied and continuously released for a long period. In this study, a series of ClO₂ self-releasing sachets were developed. First, poly(ether-block-amide) (PEBAX) and polyethylene-glycol (PEG) composite films containing different ratios of citric acid (CA) were prepared using the solution casting method. The as-prepared PEBAX/PEG-CA composite films were evaluated using FT-IR, DSC, and TGA to confirm chemical structure and thermal properties. Subsequently, PEBAX/PEG-CA composite films were designed in the form of a sachet and NaClO₂ powder was transferred into the sachet to achieve a ClO₂ self-releasing system. The ClO₂-releasing behavior of the sachet was investigated by measuring the release amount of the gas using UV-vis. The release amount of ClO₂ increased with increasing CA contents owing to the existence of higher protons (trigger) in the polymer matrix. Further, ClO₂ gas was released for a longer time. Therefore, the as-prepared smart sachet can be tuned according to applications and packaging sizes to serve an optimal sterilization effect.

• Applied Chemistry for Engineering
• /
• v.4 no.2
• /
• pp.273-283
• /
• 1993

Addition of various acids or organic compounds to the electrolyte solution during the electrodeposition of $PbO_2$ on titanium madras substrate strongly affected performance of the deposited $PbO_2$ layer. Results of X-ray diffractometry ascertained that ${\beta}-PbO_2$ was deposited in acidic electrolyte. Among additives used in this experiment, $PbO_2$ with a high oxygen overvoltage was electrodeposited when sodium lauryl sulfate was added, and $PbO_2$ with a lower chlorine overvoltage was electrodeposited when polyethylene glycol was added to the electrolyte solution. The oxygen and chlorine overvoltage of $PbO_2$ was strongly dependent on the stirring provided during the electrodeposition experiment. It was observed by the SEM results that the $PbO_2$ grains deposited when stirring was not provided during the electrodeposition have larger than $PbO_2$ grains deposited by stirring. In the $PbO_2$ deposition under acidic electrolyte, the oxygen overvoltage increased with larger $PbO_2$ grains and the chlorine overvoltage decreased with smaller $PbO_2$ grains. The optimal current efficiency of $PbO_2$ in the presence of perchloric acid was observed at $Pb(NO_3)_2$ 560g/l, $65{\sim}70^{\circ}C$, and pH>1.

• Journal of the Korean Ceramic Society
• /
• v.53 no.3
• /
• pp.325-331
• /
• 2016

Anatase particles of titanium dioxide were prepared from $TiCl_4$ aqueous solution by using an electro-dialysis [ED] process. For the preparation of an aqueous solution of $TiCl_4$ precipitates, $TiCl_4$ liquid frozen in ice was transferred to a neck flask and then hydrolyzed using deionized [DI] $H_2O$. During the hydrolysis of the $TiCl_4$ solution at $0^{\circ}C$, a slurry solution of $TiOCl_2$ was obtained and the color changed from red to orange. The ED process was applied for the removal of chlorine content in the slurry solution. Two kinds of hydrolyzed slurry solution with lower [$Ti^{4+}$] and higher [$Ti^{4+}$] were sampled and the ED process was applied for the samples according to the removal time of [$Cl^-$]. With de-chlorination, the solution status changed from sol to gel and the color quickly changed to blue. Finally, white crystalline powders were formed and the phase was confirmed by XRD to be anatase crystallites. The morphology of the hydrous titania particles in the solution was observed by FE-SEM. The hydrous titania particles were nano-crystalline, and easily coagulated with drying.

• Journal of environmental and Sanitary engineering
• /
• v.10 no.1
• /
• pp.106-125
• /
• 1995

Recently, in accordance with elevation of life style and economics, the public demand became increasingly concerned about drinking water quality. Without an adequate supply of safe water, healthy and comfortable life could not exist. Therefore, the purpose of this study is to provide the guidelines and the basic informations to enable supply of clean, tasty and healthy drinking water acceptable for various demands. We analyzed the quality of tap water, mineral water, purified tap water using home tap water purifier. And we researched on the sense of the public complaint over the tap water. We proposed several items relating to the comfortableness of water quality and the target value. Also we presented a case of water supply system for purity and the points at problem The items and target value are as follows 1. turbidity : not more than 1 degree 2. dry residue : $30~200{\;}mg/{\ell}$ 3. hardness : $10~100mg/{\ell}$ 4. free carbon dioxide : not more than $20mg/{\ell}$ 5. $KMnO_{4}$ consumption not more than $3mg/{\ell}$ 6. odor threshold not abnormal 7. residual chlorine : not more than $0.4mg/{\ell}$ 8. water temperature' not more than $20^{\circ}C$ 9. manganese : not more than $0.01mg/{\ell}$ 10. iron : not more than $0.02mg/{\ell}$ 11. aluminum : not more than $0.1mg/{\ell}$

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.377-380
• /
• 2020

The increase in single households, changes in consumption behavior, and the size of marts are becoming larger, whereas the packaging form is being changed to small packaging containers, small packages are being exported when exporting agricultural products, especially fruits and related crops, leading to CO2 at the time of export. Although it was processed, it was difficult to guarantee the freshness of the crops inside the package during the transportation period. Therefore, it is necessary to provide a new method of maintaining freshness for application to agricultural products distributed in small packaging containers as a freshness retention agent to prevent deterioration of crops by microorganisms due to changes in product temperature during transportation or display during distribution of agricultural products. I was researching ways to bring about innovation.