• Corrosion Science and Technology
• /
• 제15권6호
• /
• pp.303-310
• /
• 2016

The tap water used in Seoul was found to be corrosive. Its corrosivity was effectively reduced by that the additions of alkali agent such as NaOH, $Ca(OH)_2$ and corrosion inhibitor such as $H_3PO_4$. For the corrosion test, carbon steel pipe 50 m long was exposed to the drinking water produced by a pilot plant at $36.5^{\circ}C$, similar to the existing process where it takes about 20 minutes to reduce the initial chlorine content of 0.5 mg/L to 0.05 mg/L. $CO_2$ and $Ca(OH)_2$ was added not only to control the Langelier index (LI) above -1.0 and but also, to increase the duration time of residual chlorine by about 6 times. The persistence effect of residual chlorine was in the order of $H_3PO_4$ > $Ca(OH)_2$ > NaOH. Measurements of weight loss showed that corrosion inhibition was effective in order of $Ca(OH)_2$ > $H_3PO_4$ > NaOH > no addition, where the concentrations of $Ca(OH)_2$ and phosphate were 5 ~ 10 mg/L (as $Ca^{2+}$) and 1 mg/L (as $PO{_4}^{3-}$), respectively.

• Advances in environmental research
• /
• 제1권4호
• /
• pp.257-276
• /
• 2012

QSAR models for chlorinated alkenes were developed between $E_{HOMO}$ and their chlorine and carbon content. The aim is to provide valid QSAR model which is statistically validated for $E_{LUMO}$ prediction. Different molecular descriptors, $N_{Cl}$, $N_C$ and $E_{HOMO}$ have been used to take into account relevant information provided by molecular features and physicochemical properties. The best model were selected using Partial Least Square (PLS) and Multiple Linear Regression (MLR) led to models with satisfactory predictive ability for a data set of 15 chlorinated alkene compounds.

• 한국식품조리과학회지
• /
• 제20권6호
• /
• pp.684-694
• /
• 2004

The purpose of this study was to estimate the microbial and physicochemical quality of some raw vegetables and suggest safer methods of sanitization and storage for foodservice operations. Three sanitization methods were utilized during pre-preparation (tap water, chlorine water and electrolyzed water). Leek and Chicory were monitored as ingredient, with different storage temperatures $(3,\;10^{\circ}C)$ and periods (1, 2, 3, 4 and 7 days). The largest reduction in the microbial counts was shown with the electrolyzed water and for the case before immersion in chlorine water, performing a first washing was more effective in reducing the microbial counts than with no washing. The results showed that the storage temperature, pH, moisture content and microbial loads were important factors affecting the quality of vegetables.

• Journal of the Korean Wood Science and Technology
• /
• 제27권4호
• /
• pp.65-71
• /
• 1999

This study was carried out to investigate the effect of xylanase pretreatment of the unbleached hardwood kraft pulp during the conventional Chlorine-Extraction- Hypochlorite (CEH) bleaching on pulp property. Optimum bleaching condition was evaluated by using Novozym produced from the fungus Humicola insolens. Also the effect of chelating agent prior to enzyme treatment was analyzed. The kappa number of enzymatic bleached pulp at the enzyme charge 10 IU/ml was slightly similar to that of bleached pulp without enzyme. By enzyme treatment, the chlorine charge in conventional CEH bleaching process of hardwood KP could be reduced by 17%, while no adverse effect on pulp yield and strength was. The optimum condition for enzyme pretreatment was 10 IU/ml xylanase charge, 3 to 4 hrs treatment, and 2% pulp consistency. In sugar composition in the enzyme pretreated pulp, arabinose and mannose were not much different, but more xylose was retained. This high content of hemicellulose in pulp seems to play an important role in pulp properties. The pulp pretreatment by chelating agent prior to enzyme treatment could improve the enzyme activity and enhance the bleaching effect at 0.2% diethylenetriamine pentaacetic acid (DTPA) charges.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.38-39
• /
• 2019

Mechanical properties of concrete containing furnace slag according to the CBS Dust Replacement Ratio were analyzed. The experimental study found that the compressive strength was excellent in the early age when the CBS Dust was replaced, and the drying shrinkage was excellent, and the replacement of CBS Dust 5% on the concrete containing the furnace slag would have a positive effect.

• Journal of Ceramic Processing Research
• /
• 제13권spc1호
• /
• pp.110-113
• /
• 2012

Ge-S and Li-Ge-S powders were synthesized via solution-based process in order to employ chalcogenide-based solid electrolyte for use in Li secondary batteries. GeCl4 and thioacetamide in combination result in Ge-S powders of which major crystalline phase becomes GeS2 where the tetragonal and orthorhombic phases coexist after heat treatment. A chemical treatment using NaOH brings about the reduction of chlorine in the powders obtained. However, the heat treatment at 300 ℃ is more effective in minimizing the chlorine content. When lithium chloride is used as the precursor of Li ions, the LiCl powders are agglomerated with an inhomogeneous distribution. When Li2S is used, the Li-Ge-S powders are distributed more uniformly and the orthorhombic GeS2 phase dominates in the powders.

• 공업화학
• /
• 제23권1호
• /
• pp.86-92
• /
• 2012

이온교환수지(ion exchange resin; IER)를 이용하여 이산화염소($ClO_2$)의 전구체 용액인 아염소산나트륨($NaClO_2$) 용액으로부터 아염소산이온($ClO_2^-$)을 흡착시킨 후 전기분해장치(electrolysis system)에 의한 이산화염소 가스 발생 특성을 조사하였다. 이온교환수지는 강염기성 음이온교환수지를 사용하였으며, 전극으로는 Ru, Ir이 코팅된 Ti plate를 사용하였다. 반응조의 교반속도, 온도, 아염소산 제조농도, 이온교환수지의 투입량과 형태에 따라 이온교환수지의 아염소산이온($ClO_2^-$) 흡착량에 미치는 영향을 조사하고 최대 흡착량을 나타내는 이온교환수지를 도출하였다. 전기분해장치에 의한 이산화염소의 발생 추이를 관찰하고 발생 목표값에 최적화된 조건을 실험계획법인 반응표면분석(response surface design)으로 선정하였다. 최대 흡착량을 나타내는 강염기성 음이온교환수지는 SAR-20 (TRILITE Gel type II형)이며 그 흡착량은 약 110 mg/IER (g)으로 관찰되었으며, 전기분해장치의 이산화염소 발생 최적조건은 멸균 목표값인 900~1000 ppm, 1 h에서 정전류는 전류인가 전극의 면적을 기준으로 $A/dm^2$, $N_2$ gas 유량은 4.7 L/min이었다.

• 한국식품영양과학회지
• /
• 제11권4호
• /
• pp.25-30
• /
• 1982

임신중독증 환자의 식이와 혈청중의 전해질과의 관계를 살펴 보고저 환자의 식단과 혈청중의sodium, potassium, chlorine의 함량을 조사하였다. (1) 환자의 혈청에서 측정된 나트륨 함량은 평균 $147.2{\pm}11.0mEq/l(338.5mg/dl)$로 한국 정상인의 평균치 140mEq/l(322mg/dl)보다 7.2mEq/l(16.5mg/dl)가 높았다. (2) 염소의 함량도 평균 $113.4{\pm}5.6mEq/l(402.5mg/dl)$로서 정상인의 평균치인 103.5mEq/l(365.6mg/dl)와 비교할 때 9.9mEq/l(36.9mg/dl)의 차이를 보여 임신중독증 환자는 정상인보다 혈청중 나트륨과 염소의 함량이 높다는 것을 알 수 있었다. (3) 칼륨 함량은 평균 $4.59{\pm}0.7mEq/l(17.9mg/dl)$로서 정상인의 칼륨 평균치인 4.2mEq/l(16.3mg/dl)보다 0.39mEq/l(1.5mg/dl)의 차이를 보여 정상인과 큰 차이가 없는 것으로 나타났다. (4) 임신 중독증 환자의 식단에서 검출된 식염의 함량은 하루에 평균 $20.84{\pm}2.1g$으로서 정상인의하루 섭취량인 19g보다 1.84g을 더 섭취하고 있는 것으로 나타나 저염식이를 하고있지 않음을 알 수 있었다.

• Elastomers and Composites
• /
• 제54권1호
• /
• pp.40-53
• /
• 2019

The physical properties of chloroprene rubber (CR) compounds reinforced with networked silicas were investigated by comparing them to those reinforced with conventional silica to observe the effect of the organic connection bonds combining silica particles on their cure, tensile, and aging performance. The introduction of networked silica to CR increase in silica content to 80 phr in rubber, while the content of conventional silica was limited to 60 phr. The CR compounds reinforced with networked silica showed higher resistance to combustion. The gradual increases in delta torque, Mooney viscosity, and modulus of silica-filled CR compounds with silica content were mainly attributed to the specific interaction between the chlorine atoms of CR and the hydroxyl groups of silica. The CR compounds reinforced with networked silica showed low compression set and heat build-up and maintained their high modulus even after thermal, oil, and ozone aging.

• 한국연초학회지
• /
• 제8권1호
• /
• pp.13-21
• /
• 1986

The fragility, which express the fineness index, increased linearly with the moisture content for various tobacco shreds and showed a high correlation to the moisture content. Then, fineness index (FIs) at reference moisture content(l2.5%) was obtained by following equation. FIs=FIm+A(12.5-Mm) A" denote the gradient of simple linear regression equation between the fineness index and moisture content. FIm; the fineness index measured at the standard moisture content(12.5%). The characteristics of fragility concerning with some kinds of tobacco raw materials, stalk position, moisture content and storaged time were investigated. The following results were obtained. 1. The moisture content range of less fragile of tobacco raw material was from 16% to 20%. whereas the rolled process sheet tobacco was from 12% to 16%. 2. The Bright yellow and the paper process sheet tobacco were less fragile than that of the other tobacco raw materials. 3. The leaves were more distant from middle stalk position, and its become more fragile. 4. Physical properties of the storaged tobacco leaves were determined as a function of each storageunction of each storage time. The long-term storaged leaves(more than 3 years) were slightly lighter weight, more fragility and lower equilbrium moisture content than thos of the mid-term storaged leaves.(less than 3 years). 5. Contents of chemical component of the storaged leaves were determined every storage time. The long-term storaged leaves were slightly lower content of nicotine and chlorine than those of mid-term storaged leaves, but contents of crude fiber, total ash and calcium were increased significantly.