• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.95-95
• /
• 2010

Because of the environmental matters the importance of the city railroad is as time goes by increasing. The case of obstacle of the power equipment which supplies electric power to city railroad will occur social and economical enormous loss. Thus, I studied on the preventing method in advance which makes it possible for us to maintain facilities efficiently. The main check points of the power facilities are voltage, current, humidity, partial discharge, move current. These points are gathered by sensor and transmitting to data acquisition device. These data are used to check equipment status in real time. In this paper I described in brief test process and results of the detection system.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1930-1936
• /
• 2010

Because of the environmental matters the importance of the city railroad is as time goes by increasing. The case of obstacle of the power equipment which supplies electric power to city railroad will occur social and economical enormous loss. Thus, I studied on the preventing method in advance which makes it possible for us to maintain facilities efficiently. The main check points of the power facilities are voltage, current, humidity, partial discharge, move current. These points are gathered by sensor and transmitting to data acquisition device. These data are used to check equipment status in real time. In this paper I described in brief test process and results of the detection system.

• Korean Journal of Remote Sensing
• /
• v.16 no.2
• /
• pp.177-188
• /
• 2000

Quantitative accuracy assessment of a SPOT DEM (Digital Elevation Model) generated by a fully automatic software is performed along the 90km long coast around Donghae city. The theoretical requirement on the layout of the CPS (Global Positioning System) check points is derived: the Nyquist sampling. Since in practice the Nyquist frequency of a terrain is difficult to determine, the relaxed requirements are introduced and 31 check points are collected accordingly. Accuracy of the SPOT DEM is calculated to be 8.9, 11.5 and 12.0m r.m.s. in latitudinal, longitudinal and elevation directions. The bias is distinguishable from zero only for elevation and is 2.2m. The simple comparison with the world's leading commercial softwares reveals the similar accuracy level.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.6
• /
• pp.57-63
• /
• 2005

According to increasing of demand for high accurate and quick measuring technology, they became to interest in industrial photogrammetry that can satisfy with this needs. This study is examined O-2A aircraft to check the application of Industrial Photogrammetry technology. To measure the aircraft alignment, the check points marked on it were used without exact aircraft design data. And to check any deformation of its external original feature, Pro-spot system has been used.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.207-210
• /
• 2000

Singular points are those at which the determinant of a Jacobian matrix is zero. A parallel manipulator gains mostly an extra DOF at the singular points, where it can not be properly controlled. In this study, singular points of a cubic parallel manipulator are illustrated by obtaining the determinant of a Jacobian matrix mathematically, and the singular points of the manipulator are found to be three separate planes in a 3D space. The dependency among links for each singular point is determined by applying linear algebra. Also, the singular points and workspace of the cubic parallel manipulator are plotted to check if the workspace contain singular points.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.1
• /
• pp.107-113
• /
• 1995

Generally, the objectives of the geodetic network adjustments are for solving the configuration of geodetic net-works and the problem of observation plans. In this study, assuming that the configuration is fixed, for improving the accuracy of geodetic networks, we focus on choosing adjustment control points and adjustment methods. By choosing adjustment control points and adjustment methods, the adjustment result accuracy of national geodetic networks can be different. So, in this study, we introduce the algorithm that use free network adjustment concept to minimize the displacements of new station points but fixing existing control points. Then, us-ing adjustment results, we can check the errors of existing control points. After checking the errors of existing control point, in case of severe error points in existing control points, we change those points into unknown station points and repeat the algorithm to optimize the coordinates of new station points. As applying this algorithm to simulation network, we can check the errors of existing control points. And changing severe error points into unknown station points, we can decrease the errors of network and optimize the coordinates of new station points. From the results of simulation network adjustment, we think that, as applying this algorithms to sequential adjustment of geodetic network and public surveying that using national geodetic network, the accuracy of network adjustments can be improved.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.3-6
• /
• 2007

The GPS baseline processing and the network adjustment was required a preliminary classification and check for effective work because the observation data of GPS $3^{rd}$ order control points are enormous attain to about 12,000 points. Particularly, in baseline processing and network adjustment a inaccuracy GPS antenna heights and point names yield a gross error or a S/W computation error. For the baseline processing of observation data, the related all materials were collected and were required a final check. The factor occurring a error, in GPS the baseline processing, were inspected variously after a checking observation data. Also, baseline processing method of GPS $3^{rd}$ order control points were commented and the analysis carry out a results with a experiment. The ellipsoidal distance and height of duplication baseline was compared between adjoin campaign areas for a accuracy analysis of baseline processing. According to the result, the mean is about 1cm for horizontal direction and about 2cm for vertical direction.

• International Journal of CAD/CAM
• /
• v.7 no.1
• /
• pp.51-60
• /
• 2007

This paper presents an algorithm of optimal cutting tool selection for machining of the point-based surface that is defined by a set of surface points rather than parametric polynomial surface equations. As the ball-end and fillet-end mills are generally used for finish machining in a 3-axis computer numerical control machine, the algorithm is applicable for both cutters. The optimum tool would be as large as possible in terms of the cutter radius and/or corner radius which maximise (s) the material removal rate (i.e., minimise (s) the machining time), while still being able to machine the entire point-based surface without gouging any surface point. The gouging are two types: local and global. In this paper, the distance between the cutter bottom and surface points is used to check the local gouging whereas the shortest distance between the surface points and cutter axis is effectively used to check the global gouging. The selection procedure begins with a cutter from the tool library, which has the largest cutter radius and/or corner radius, and then adequacy of the point-density is checked to limit the accuracy of the cutter selection for the point-based surface within tolerance prior to the gouge checking. When the entire surface is gouge-free with a chosen cutting tool then the tool becomes the optimum cutting tool for a list of cutters available in the tool library. The effectiveness of the algorithm is demonstrated considering two examples.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.50
• /
• pp.293-302
• /
• 1999

This paper presents an efficient reengineering technique for the logistics process innovation which is the foundation of supply-chain management. Based on consulting experience on the domestic manufacturing firms, this paper provides promotion step for logistics innovation and six reengineering points including check system for customer's credit limit, check system of real-time inventory information, automatic system for sequential production plan, automatic order-release system, automatic packing system, and happy-call system for order-forward information. For each reengineering point, application cases in domestic industry are also presented.

• Korean Journal of Human Ecology
• /
• v.23 no.3
• /
• pp.453-465
• /
• 2014

This study surveyed 266 housewives residing in a Gyeonggi-provincial area for their dietary attitudes, dietary habits, nutrition knowledge, and application of nutrition information to daily life according to whether they use nutrition labeling. The survey on the dietary attitudes of the subjects showed that the points of "think that nutrition affects health", "quite interested in nutrition and health information", "like developing and trying new diverse recipes", and "persistently try new foods" were higher among those who check out nutrition labeling (Check group, n=112) than those who do not check out nutrition labeling (No check group, n=154). Reason for snacking, the Check group reported higher in the reasons of "for taking nutrients" but lower in the reasons of "do not eat enough meal" and "impulsively" than the No check group (p<0.01). Asked about why they check the nutrition labeling, the Check group answered "to compare products with each other" and "to purchase healthy food" whereas the No check group said "to decide whether the food is safe or not" and "to reduce body weight" (p<0.01). The Check group showed more recognition on the significance of the nutrition labeling and application to their actual daily lives than the No check group. Therefore, our results suggest that proper use of nutrition labeling is expected to improve dietary attitudes and dietary habits as well as enhance the application of nutrition information to actual daily life and promote health not only for the housewives but also for their family members as well.