• 대한전자공학회논문지SD
• /
• 제40권7호
• /
• pp.532-541
• /
• 2003

메모리에서의 대부분의 전력은 프리디코더 라인, 워드 라인, 그리고 비트 라인 등과 같은 커패시턴스가 큰 라인들에서 소모된다. 이 라인들에서의 전력 소모를 줄이기 위하여 전하 재활용과 전하 공유를 사용한 세 가지 기법들이 제안되었다. 이 기법들은 전하 재활용 프리디코더(charge recycling predecoder, CRPD), 전하 재활용 워드 라인 디코더(charge recycling word line decoder, CRWD), 그리고 롬을 위한 전하 공유 비트 라인(charge sharing bit line, CSBL)이다. CRPD와 CRWD는 프리디코더 라인과 워드 라인의 전하를 재활용하여 소모 전력을 반으로 줄여주고, 전하 공유 기법을 사용하는 CSBL은 롬 비트라인의 스윙 전압을 낮춤으로써 소모 전력을 크게 줄여준다. CRPD, CRWD, 그리고 CSBL의 소모 전력은 기존의 82%, 72%, 그리고 64%이다. 제안된 세 가지 기법들을 사용하는 전하 재활용 전하 공유 롬(charge recycling and charge sharing ROM, CRCS-ROM)이 0.35㎛ CMOS공정으로 제작되었다. 제작된 8K×16비트 CRCS-ROM의 코어 크기는 0.51㎟이고 3.3V 전원과 100㎒ 동작 주파수에서 8.63㎽ 을 소모하였다.

• 대한전자공학회논문지SD
• /
• 제41권7호
• /
• pp.81-88
• /
• 2004

본 논문에서는 저전력 소면적 전하재활용 프리디코더(area efficient charge recycling predecoder: AE-CRPD)를 제안하였다. AE-CRPD는 기존의 전하재활용 프리디코더(conventional charge recycling predecoder: CNV-CRPD)를 개선한 프리디코더이다. AE-CRPD는 전하재활용 동작을 위한 제어 회로의 면적과 전력소모를 크게 줄임으로써, 2-to-4 CNV-CRPD의 38%의 면적과 8%의 전력소모를 줄였다. 또한, 메모리에서 어드레스가 연속적으로 증가하는 특징을 이용하여, 빈번하게 변하는 LSBs(least significant bits)에는 AE-CRPD를 사용하고 가끔 변하는 MSBs(most significant bits)에는 기존의 프리디코더를 사용함으로써, 기존의 12 비트의 프리디코더의 전력소모를 23% 줄였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.653-656
• /
• 2005

New charge-recycling structure and driving scheme for TFT-LCD source-driver IC application are proposed. The number of additional switches for the charge recycling is greatly reduced. An experimental prototype 6-bit source driver with five-level seven-phase charge recycling implemented in a $0.35-{\mu}m$ CMOS technology demonstrates that the quiescent current is only 3.1 mA, dynamic power saving is 75 %, and the settling time, which includes the charge-recycling and data driving, is within 25 $25{\mu}s$.

• 대한전자공학회논문지SD
• /
• 제38권11호
• /
• pp.821-827
• /
• 2001

새로운 저전력 전하 재활용 롬(charge recycling ROM) 구조를 제안하였다. 전하 재활용 롬은 전력 소모를 줄이기 위하여 전체 롬에서의 소모전력의 약90%를 소모하는 비트라인(bit line)에 전하 재활용 방식을 사용한 롬이다. 제안된 방식을 사용하였을 경우, 비트라인의 수가 무한이 많고 감지 증폭기(sense amplifier)가 무한히 미세한 전압차를 감지할 수 있다면, 롬의 비트라인은 전력을 거의 소모하지 않는다. 그러나, 실제 존재하는 감지 증폭기는 매우 작은 전압차를 감지할 수 없기 때문에, 롬에서의 전력 감소량은 제한된다. 모의 실험 결과는 전하 재활용 롬이 기존의 저 전력 콘택트 프로그래밍 롬(contact programming ROM)의 13% ∼ 78% 전력만을 소모함을 보여준다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.661-662
• /
• 2006

This paper introduces a CMOS clock driver that shows a high efficiency of electric power (lower power consumption) with the supply of lower voltage(VDD), by taking advantage of charge recycling technology. Comparing with the existing structure, this driver showed the improved maximum efficiency of electric power; 72% and 68%, with the supplied voltage of 1.8v and 1.2v, respectively. Since the output waveform shows the tri-state operating region, utilization is expected in the digital integrated circuits.

• 한국전기전자재료학회논문지
• /
• 제21권9호
• /
• pp.801-807
• /
• 2008

Recently, CV, CN-CV and CNCV-W cable are used for HVDC transmission and distribution cable. However, XLPE which is used as insulation layer of power cable has thermosetting properties. It is very difficult to recycling. In this paper, we prepared HDPE/EVA film, which the blending ratio are 80:20, 70:30, 60:40, 50;50 respectively for the purpose of recycling. Main factor such as electric field distribution and its resistivity in insulation system affected on insulation performance and reliability for HVDC applications. Therefore, electric field distribution formed by space charge and characteristics of volume resistivity was currently investigated. We suggest the possibility of utilization for HVDC insulation layer from the results.

• 자원리싸이클링
• /
• 제12권5호
• /
• pp.3-9
• /
• 2003

In order to prospect current recycling status in Korea, legislative system and policies relating to recycling, wastes generation and recycling rate were reviewed. Approximately 260,400 ton/day of wastes was generated in 2001. 48,400 ton/day of household waste and 212,000 ton/day of industrial waste. During the last ten years, waste management laws such as waste disposal law, recycling law and environment friendly industry law were prepared. In this article, concerning over waste generation and recycling, recycling law, Extended Producer Responsibility System and the problems and technological developments associated with recycling were summarized.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1088-1091
• /
• 2009

A boost converter with charge-recycling technique fabricated by $0.25{\mu}m$ CMOS BCD process can provide different supply voltages to drive series RGB LEDs in sequence for reducing the power consumption on the constant current generator. The proposed technique stores and restores extra energy to improve the efficiency, as well as enhances the reference tracking response. Experimental results show that the period of reference-tracking response can be improved. When the load current is 100mA, the periods of reference down-tracking and uptracking are smaller than $10{\mu}s$ and $20{\mu}s$, respectively. Experimental results demonstrate fast and efficient reference tracking performance is achieved.

• Journal of information and communication convergence engineering
• /
• 제15권1호
• /
• pp.62-71
• /
• 2017

This paper presents a low-power voltage converter based on a reconfigurable capacitor array. Its energy recycling capacitor array stores the energy during a charge stage and supplies the voltage during an energy recycle stage even after the power source is disconnected. The converter reconfigures the capacitor array step-wise to boost the lost voltage level during the energy recycle stage. Its energy saving is particularly effective when most of the energy remaining in the charge capacitors is wasted by the leakage current during a longer sleep period. Simulations have been conducted using a voltage source of 500 mV to supply a $V_{DD}$ of around 800 mV to a load circuit consisting of four 32-bit adders in a 65-nm CMOS process. Results demonstrate energy recycling efficiency of 85.86% and overall energy saving of 40.14% compared to a conventional converter, when the load circuit is shortly active followed by a long sleep period.

• 한국폐기물자원순환학회지
• /
• 제35권8호
• /
• pp.785-798
• /
• 2018

Since the Framework Act on Resource Circulation was enacted in 2018, the government should establish a National Resource Circulation Master Plan every 10 years, which defines mid- to long-term policy goals and directions on the efficient use of resources, prevention of waste generation and recycling of waste. In addition, we must set mid- to long-term and stepwise targets for the final disposal rate, recycling rate (based on sorted recyclable materials and recycled products), and energy recovery rate of wastes, and relevant measures should be taken to achieve these targets. However, the current industrial waste (IW) statistics have limitations in setting these targets because the final disposal rate and recycling rate are calculated as the ratio of the recycling facility input to the IW generation. In this study, the material flow from the collection stage to the final disposal of industrial waste was analyzed based on the generation of 2016, and the actual recycling amount, actual incineration amount, final disposal amount and their rates were calculated. The effect on the recycling, incineration and final disposal rates was examined by changing the treatment method of nonhazardous wastes from the factory and construction and demolition wastes, which were put in landfills in 2016. In addition, the variation of the waste treatment charge was investigated according to the change of treatment methods. The results of this study are expected to be effectively used to establish the National Resource Circulation Master Plan and industrial waste management policy in the future in South Korea.