• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.4
• /
• pp.15-24
• /
• 2009

This paper estimates the nation wide amount of forest biomass arising from management operation for domestic forest based on the simulations that are composed of five scenarios for selecting the target area of thinning. In 2009, the forest biomass arising from thinning is estimated to be 6,642,174 $m^3$. The estimates of forest biomass in 2015 and 2018 are 5,935,140 $m^3$ and 5,682,538 $m^3$, respectively. Since the target forest for thinning policy is estimated to be decreasing, the biomass generated by thinning will decline too. The estimates of forest biomass can be used to induce more effective application of woody biomass rather than one-sided use such as raw materials for solid fuels including pellets and charcoals.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.4
• /
• pp.25-32
• /
• 2009

Forest biomass can be used as various types of raw materials such as pulp, wood pellets, solid charcoals and so on. This paper estimates the nation wide amount of forest biomass based on the projection of forest areas for its effective and economic use. Several trend equations are used in projecting the forest areas. In 2009, the forest biomass arising from thinning is estimated be 6,591,575 $m^3$. The estimates of forest biomass in 2015 and 2018 are 6,375,627 $m^3$ and 6,284,779 $m^3$, respectively. Since the forest areas are projected to be declining, the biomass generated by thinning will decrease. This implies that the new alternatives for supplying raw materials for biofuels must be prepared before then.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.2
• /
• pp.46-51
• /
• 2003

The charcoal is known to have gas adsorption capability and is used frequently to mitigate the unpleasant smells from food and clothing. It is also used to treat water to remove dissolved organic and inorganic substances. In this paper, we applied the several different kinds of charcoals to the papers in three different ways to investigate if charcoal application method affects its gas adsorption capability. Wet end addition, making multiply, and coating method were tested. Specific ethylene gas adsorption capabilities were measured. Experimental results shows that manufacturing conditions of the charcoal itself changed its gas adsorption properties. The boxes used for agricultural produces, and the packaging paper for flowers are to be well fitted application for the charcoal added paper. Mulch paper, which needs opacity and air permeability with proper strength properties, is another candidate for the application of charcoal added paper.

• Journal of Korean Society on Water Environment
• /
• v.25 no.2
• /
• pp.205-211
• /
• 2009

In this study, the membrane filter method was compared to the MPN method for the analysis of total coliforms from raw water using raw test waters and controls including 6 standard strains of coliforms, and the various factors were analyzed on the detection of general and fecal origin coliforms. The range of error rate for the detection of 5 standard strains using the membrane filter and the MPN methods was 0 to 6% and 45 to 133%, respectively. The error rate of the membrane filter method was lower than that of the MPN method. The membrane filter method (m-Endo) showed 10% (11 out of 111) of difference for the detection sensitivity of coliforms isolated from raw water compared to the MPN method (BGLB). The membrane filter method was less affected by the factors including temperature, turbidity, charcoals of powder form, contamination, and reverse pressure. In conclusion, the membrane filter method is a better method for the analysis of total coliforms from raw water than the MPN method, considering the accuracy of detection and the tolerance to various experimental factors.

• Journal of Fisheries and Marine Sciences Education
• /
• v.12 no.2
• /
• pp.152-163
• /
• 2000

Floating resin pellets including plastics were surveyed from 7 coastal beaches near Young-il Bay during summer and winter season on 1998 ~ 2000 year. Plastic fabrication materials in the survey were founded with 6 items using the following; resin pellets, plastic debris, styrofoams, cigar filters, wood pieces and charcoals. The results deduced in the areas are as follows: 1. The seasonal variability of the all debris is revealed that summer season were remarkably larger than those of winter. This is deduced it is attributed to meteorological effects, e.g, the seasonal wind strength, current vectors and resorts of crowded people for beach enjoy. And the distribution of plastic debris is Pohang Songdo $12.9ea/m^2$, Pohang Bookbu $8.8ea/m^2$, Togoo $4.9ea/m^2$, Chilpo $3.2ea/m^2$, Hwajin $1.4ea/m^2$, Wolpo and Guryongpo $0.8ea/m^2$ respectively. 2. Compared with each beaches, Songdo beach, northern part beach of Pohang city and Togoo beach have higher densities than those of the others. Especially, the highest densities of all debris were discovered in the Songdo beach of Pohang city. 3. The change of density over the whole year was similarly distributed in quantities and fabrication materials. 4. These surveys were founded that the most parts of plastic debris materials were made up with PE and PP.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.511-518
• /
• 2017

In recent years, many interests and researches on the insulations required the multiple performances other than insulation performance. The purpose of this paper is to find the optimal ratio between wood fiber and rice-husks charcoal to develop a structural board with carbonized rice-husks. Based on these rice-husks charcoals, basic research was carried out to develop thermal insulation materials with structural performance, and the following conclusions were obtained. The MC of the board using the carbonized rice-husks was 3.2-4.1% and the density was 0.58-0.68, indicating the possibility of excellent structural material. The bending strength was 9.1-32.6 MPa in the length direction and 9.2-34.1 MPa in the width direction. It is possible to obtain the bending strength of the normally used MDF level and to find the possibility of development of the thermal insulation material having the structural performances.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.6
• /
• pp.656-669
• /
• 2018

Tropical bamboo species, which have a very rapid growth rate, are considered as a promising non-timber forest product capable of exhibiting new functionality by carbonization technology. This study was conducted to compare the characteristics of carbonized bamboos from Andong (G. pseuudoarundinacea (Steudel) Widjaja), Hitam (G. atrovialacea), Tali (G. apus), Kuning (B. vulgaris Var. striata (Lodd. Ex Lindl)), and Ampel (B. vulgaris Scharad. ex Wendland), and Betung (D. asper). Each bamboo was carbonized at 200, 400, 600, 800, and $1,000^{\circ}C$, respectively, and their physical and anatomical characteristics were investigated. The result showed that the volume and weight of carbonized bamboo decreased with increasing carbonization temperature and showed the substantial changes of volume and weight between 200 and $400^{\circ}C$. The highest and the lowest density of carbonized samples were found in Ampel bamboo and Betung bamboo, respectively. The density of all carbonized bamboos tended to decrease after carbonization at 200 and $400^{\circ}C$ and relatively become constant afterwards. The carbonized bamboo prepared at 800 and $1,000^{\circ}C$ showed better refining degree. The results of the anatomical observation showed that the vascular diameter of carbonized bamboo decreased with increasing carbonization temperature, and the shrinkage in radial and tangential direction showed similar tendency. Statistical analysis showed that there was significant correlation between physical contraction and anatomical contraction. Based on the results of this study, comprehensive data about Indonesian bamboo charcoals could be obtained and it will be useful for future application studies.

• Journal of Conservation Science
• /
• v.8 no.1 s.11
• /
• pp.16-22
• /
• 1999

Species of 741 charcoal samples, which were excavated from the dwelling sites of the bronze age $(about\;2500\~3100\;B.P)$ at Hyeonwha-ri, Pyungteak, Korea, were identified. Most of samples were deciduous oaks (Quercus spp.; $97.7\%$) and others were alders (Ainus spp.; $1.9\%$) and soft pines (Pinus spp.; $0.4\%$). Tree rings of nine largest samples were also examined. The numbers of annual rings were 8 to 36 and mean ring width was rather narrow $(0.65\~1.82\;mm)$. Most samples possessed pith and tylosis. The results indicate that logs 10 to IS cm diameter had been used for the poles of houses without further processing.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.1
• /
• pp.8-18
• /
• 2005

Adsorption capacity for the charcoal were tasted in this study to verify the performance of them for the use of the sampling media in industrial hygiene field. Two set of experiments were conducted. The first experiment was to test performance of the tested charcoal tube that were assembled in the laboratory with the use of the GR grade charcoal. The other tests were investigate the adsorption capacity of the charcoal tested in this study and charcoals embedded in the commercial charcoal tubes. Known air concentration samples for benzene, toluene, and o-xylene were prepared by the dynamic chamber. 1. At low air concentration levels (0.1${\times}$TLV), there was no significant differences between the tested charcoal tubes and the SKC charcoal tubes. This implies that there is no defect with the adsorption capacity of the charcoal. 2. At high concentration with 60 minutes sampling, the breakthrough were found only in the tested charcoal while no breakthrough were shown in the SKC charcoal. 3. From the breakthrough tests for the charcoal, the micropore volume(Wo) were calculated by the curve fitting with the use of Dubinin/Radushkevich(D/R) adsorption isotherm equation. The calculated values were 0.687cc/g for SKC, 0.504cc/g for Sensidyne, and 0.419cc/g for the tested charcoal(Aldrich). 4. Adsorption capacities were obtained from the isotherm curves shown adsorption capacities at several levels of the challenge concentration. All range of the air concentration concerned in industrial hygiene, the SKC charcoal showed approximately two times of adsorption capacity compared to the tested charcoal.

• Fashion & Textile Research Journal
• /
• v.18 no.4
• /
• pp.531-539
• /
• 2016

Charcoal dyed fabrics have been widely used in home textiles and functional clothing due to their anti-statics, antibacterial, deodorization, far infrared emitting and anion releasing. Soybean fiber were regenerated from soybean. Soybean fiber have biodegradable, microbiocidal, non-allergic, and anti-ageing properties. The purpose of this study is to investigate the dyeing characteristics of soybean fabric using charcoal as colorants. Soybean fabrics were dyed with charcoal solution according to concentration of charcoal, dyeing temperature, and dyeing time. To improve washing fastness and investigate mordanting condition, soybean fabric and dyed soybean fabric with charcoal were mordanted by mordanting agents such as $CH_3COOH$(acetic acid), NaCl(sodium chloride) and $AlK(SO_4)_2{\cdot}12H_2O$(Aluminium Potassium Sulfate). Dyeability and color characteristics of charcoal dyed soybean fabric were obtained by computer color matching and SEM morphology analysis. Particle size of charcoal and color fastness were also investigated. The results obtained were as follows; Mean average diameter of charcoal was $1.39{\mu}m$. The dyeability of soybean fabric using charcoal as colorants was increased gradually with increasing concentration of charcoal dyeing solution and saturated at about 8%(o.w.b.). The optimum dyeing temperature and dyeing time were $90{\sim}105^{\circ}C$ and 60~90 minutes respectively. The overall wash fastness at dyeing concentration 2~4%(o.w.b.) and 6~10%(o.w.b.) were 4 degree and 3-4 degree respectively. The fastness to washing according to mordanting method indicated good grade result as more than 4 degree in all conditions. On the other hand, the staining of adjacent fabrics, i.e. PET, Acryl, Wool, Acetate, Nylon and Cotton was found to be of grade 4 or 4-5 in all conditions.