• 한국전기전자재료학회논문지
• /
• 제20권1호
• /
• pp.1-7
• /
• 2007

In this paper, two kinds of initial oxidation methods i.e., SLTO(Slow Low Temperature Oxidation: $700^{\circ}C$) and RTO(Rapid Thermal Oxidation: $850^{\circ}C$) are applied prior to the plasma nitridation for ultra thin oxide of RPNO (Remote Plasma Nitrided Oxide). It is observed that SLTO has superior characteristics to RTO such as lower SS(Sub-threshold Slope) and improved Ion-Ioff characteristics. Low frequency noise characteristics of SLTO also showed better than RTO both in linear and saturation regime. It is shown that flicker noise is dominated by carrier number fluctuation in the channel region. Therefore, SLTO is promising for nano-scale CMOS technology with ultra thin gate oxide.

• Progress in Superconductivity
• /
• 제2권1호
• /
• pp.20-26
• /
• 2000

A 40-channel superconducting quantum interference device (SQUID) system was constructed for measuring neuromagnetic fields. Main features of the system are the use of double relaxation oscillation SQUIDs (DROSs), and planar gradiometers measuring magnetic field components tangential to the head surface. The DROSs with high flux-to-voltage transfers enabled direct readout of the SQUID output by room-temperature dc preamplifiers and simple flux-locked loop circuits could be used for SQUID operation. The pickup coil is an integrated first-order planar gradiometer with a baseline of 40 mm. Average noise level of the 40 channels is around 1.2 $fT/cm/{\surd}Hz$ at 100 Hz, corresponding to a field noise of 5 $fT/{\surd}Hz$, operated inside a magnetically shielded room. The SQUID insert was designed to have low thermal load, minimizing the loss of liquid helium. The constructed system was applied to measure auditory-evoked neuromagnetic fields.

• 대한전자공학회논문지SD
• /
• 제45권9호
• /
• pp.8-13
• /
• 2008

균일하게 도핑된 반도체에서, 분포된 확산 잡음원에 의해서 발생하는 단자잡음전류의 전력주파수밀도를 계산하였다. 고정된 전압에서 반도체의 길이가 작아짐에 따라, 또는 주어진 반도체에서 전류레벨이 증가함에 따라, AC 단락잡음전류는 열잡음 뿐만 아니라 과잉잡음을 보인다. 이 과잉잡음은 채널길이가 외인성 Debye 길이에 비해 매우 작은 경우에는 산탄잡음의 스펙트럼과 같은 모습을 보인다. 유한한 주파수에서 속도요동 잡음원에 의한 외인성 반도체에서 발생하는 과잉잡음을 최초로 유도하였다. 유도된 과잉잡음 공식은 반도체 채널의 통과 시간, 유전 이완 시간, 속도 이완 사이의 상호 작용에 따라 단자잡음 전류와 캐리어 농도 요동이 결정됨을 명시적으로 보여준다. 또한 유도된 해석적 식을 사용하여 여러 가지 반도체 샘플 길이와 바이어스, 주파수에 따른 잡음 스펙트럼의 변화도를 계산하였다. 유도된 공식은 quasi-ballistic 수송현상이 중요한 역할을 하는 나노스케일 MOSFET의 잡음 발생 기제를 이해할 수 있는 기반이 된다.

• 설비공학논문집
• /
• 제8권2호
• /
• pp.230-239
• /
• 1996

A multi-faceted experimental investigation has been carried out to study the cooling performance for stacked modules in arrays of heat generating rectangular modules deployed along PCB's in the enclosed cabinet. The main parameters which have an important effect on cooling characteristics are flow velocity, channel spacing, installation of fan unit, attachment of heat sink, and acoustic noise. The results of individual effect are very helpful for the electronic packaging designer. In order to improve the cooling performance, it is certain that the enlargement of channel space is obviously effective, while this id disadvantageous in high density electronic packaging. Each of the paameters is quantitatively examined as cooling performance and the correlation of Reynolds number to Nusselt number is compared with previous study.

• 전자공학회논문지S
• /
• 제35S권3호
• /
• pp.9-18
• /
• 1998

For constructionof the next generation satellite B-ISDN/ATM networks considering integration with terrestrial information infrastructure networks, various high speed and wideband satellites with be launched and they will make used of frequency reue techniques for efficient management of limited frequency resource. Therefore, CCI(Co-Channel Interference) inherent in frequency reuse will be a dominant factor in performance degradation of satellite networks. This paper alanyzes the ATM cell transmission performance degradation caused by CCI. The satellite link, including up-link and down-link thermal noise, CCI, and nonlinear satellite transponder, is modeled and interleaving technique is used for compensating the ATM cell transmission performance degradation caused by burst error of satellite link. First, each satellite link subsystem is analyzed in detail and then end-to-end ATM cell transmission performance is evaluated with BER and CLR. Specifically, ATMcell transmission performance degradation caused by CCI is evaluated in detail.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.191-192
• /
• 1998

We report on the design of a low-noise 40 channel SQUID system for biomagnetism. We used low-noise SQUID sensor with the pickup coil integrated on the same wafer as the SQUID. The SQUID electronics were simplified by increasing the voltage output of the SQUID. The SQUID insert was designed to have low thermal load, minimizing the liquid helium loss. The digital signal processing provides versatile analysis tools and the software is based on the object-oriented programming. For the effective localization of the source location, solutions of the inverse problems based on the lead-field and the simulated anneal ins were studied.

• 분석과학
• /
• 제35권2호
• /
• pp.69-81
• /
• 2022

The method of measuring and classifying the energy category of neutrons directly using raw data acquired through a CZT detector is not satisfactory, in terms of accuracy and efficiency, because of its poor energy resolution and low measurement efficiency. Moreover, this method of measuring and analyzing the characteristics of low-energy or low-activity gamma-ray sources might be not accurate and efficient in the case of neutrons because of various factors, such as the noise of the CZT detector itself and the influence of environmental radiation. We have therefore developed an efficient method of analyzing radiation characteristics using a neutron and gamma-ray analysis algorithm for the rapid and clear identification of the type, energy, and radioactivity of gamma-ray sources as well as the detection and classification of the energy category (fast or thermal neutrons) of neutron sources, employing raw data acquired through a CZT detector. The neutron analysis algorithm is based on the fact that in the energy-spectrum channel of 558.6 keV emitted in the nuclear reaction ¹¹³Cd + ¹n → ¹¹⁴Cd + in the CZT detector, there is a notable difference in detection information between a CZT detector without a PE modulator and a CZT detector with a PE modulator, but there is no significant difference between the two detectors in other energy-spectrum channels. In addition, the gamma-ray analysis algorithm uses the difference in the detection information of the CZT detector between the unique characteristic energy-spectrum channel of a gamma-ray source and other channels. This efficient method of analyzing radiation characteristics is expected to be useful for the rapid radiation detection and accurate information collection on radiation sources, which are required to minimize radiation damage and manage accidents in national disaster situations, such as large-scale radioactivity leak accidents at nuclear power plants or nuclear material handling facilities.

• 한국정보통신학회논문지
• /
• 제2권4호
• /
• pp.519-529
• /
• 1998

본 논문에서는 간섭 제거기가 다중 톤 DS/CDMA 시스템의 성능에 미치는 영향을 분석하였다. 최근 여러가지 방법의 간섭 제거기가 제안되고 있으나, 여기서는 Yoon［9］ 등이 제안한 간섭 제거기를 사용하였다. 또한 세가지 종류의 간섭을 고려하였는데 다중 경로 간섭, 채널 간 간섭, 다중 접속 간섭이 그것이다. 이들 간섭 신호들과 가우시안 잡음의 분산을 구하여 신호 대 잡음비를 계산하였으며, 다중 경로 채널에서의 RAKE 수신기 와 3단계의 간섭 제거기를 고려하였다. 성능 분석 결과, 간섭 제거기는 다중 톤 CDMA 시스템에서 매우 효과 적이며, 최대비 결합 다이버시티와 심볼 당 칩 수를 증가시킴에 따라 성능이 크게 향상되어 이들 파라메터가 중요한 설계 요소임을 보였다.

• Journal of electromagnetic engineering and science
• /
• 제9권3호
• /
• pp.141-145
• /
• 2009

Interference scenarios involving and a methodology for a terrestrial international mobile telecommunication(IMT) system and mobile-satellite service(MSS) system in a co-channel environment are established. Taking into account a practical deployment situation for both systems, a computational simulation of interference in terms of the ratio of interference power to thermal noise(I/N) is performed in order to evaluate the co-frequency interference with the IMT system caused by the MSS system. The methodology and results could be used for planning an IMT deployment without an unacceptable interference impact caused by the MSS system.

• 한국전자통신학회논문지
• /
• 제3권3호
• /
• pp.165-169
• /
• 2008

계측 및 측정분야에 사용되는 아날로그-디지털 변환기는 우수한 선형성과 무시할 만큼 적은 dc 오프셋 특성을 갖으면서 높은 정밀도를 요구한다. 증분형 변환기는 전형적인 ${\Delta}{\Sigma}$ 변환기의 대부분의 장점을 보유하면서 측정 응용분야에 적합한 해법을 제공한다. 또한 이러한 형태의 변환기는 오프셋 조정이 필요 없이 정확한 변환을 할 수 있다. 대부분 이전의 증분형 변환기에 관한 연구는 단일-채널과 dc 신호 응용에 초점을 맞추었으며 20 비트 이상의 해상도보다 더 정확한 데이터 변환을 할 수 초정밀 데이터 변환에 관한 연구도 있었다. 본 논문에서는 협대역 ac 신호를 변환시켜 주는 다중화 증분형 데이터 변환기의 구현 기술을 제안한다. 또한 다중화 증분형 데이터 변환기의 SQTNR을 최적화하는 설계 방법을 제안한다. 동작 원리, 토폴로지, 그리고 디지털 decimation 필터 설계에 대해 논의한다. 시뮬레이션 결과를 통해 제안한 이론에 대한 우수성을 검증한다.