• 대한기계학회논문집B
• /
• 제30권2호
• /
• pp.144-152
• /
• 2006

In order to consider the effect of Karman vortex for mixing, mixing indices are calculated for 4 models of micro channel flows driven from the combinations of a circular cylinder and a oscillating stirrer. And their results are compared to that of a simple straight micro channel flow(model I). The mixing rate is improved 5.5 times by Karman vortex (model II) and 11.0 times by the stirrer(model III) respectively. In case of successive mixing by the cylinder and the stirrer(model IV), $27\%$ of shortening the channel length for the complete mixing as well as 1.37 times improvement of mixing efficiency then model III. And then, variation of mixing indices are much stable comparing with the others. Thus, it is found that the Karman vortex plays a good role as a pre-mixing method. The D2Q9 Lattice Boltzmann methods are used.

• The Korean Journal of Physiology
• /
• 제25권1호
• /
• pp.17-26
• /
• 1991

Single smooth muscle cells of the rabbit pulmonary artery were isolated by treatment with collagenase and elastase. Using the patch clamp technique, potassium channel activity was recorded from the inside-out membrane patch. The channel had a sin히e channel conductance of about 360 pS in symmetrical concentration of K on both sides of the patch, 150 mM, and had a linear current-voltage relationship. During the application of 10 mM tetraethylammonium (TEA) to the intracellular membrane surface, the amplitude of single channel current was reduced and very rapid flickering appeared. The open probability $(P_0)$ of this channel was increased by increasing positivity of the potential across the patch membrane, with e-fold increase by 20 mV depolarization, and by increasing the internal $Ca^{2+}$ concentration. These findings are consistent with those of large conductance Ca-activated K channels reported in other tissues. But the shortening of the mean open time by increasing $[Ca^{2+}]_i$, was an unexpected result and one additional closed state which might be arisen from a block of the open channel by Ca binding was suggested. The $P_0-membrane$ potential relationship was modulated by internal pH. Decreasing pH reduced $P_0$. Increasing pH not only increased $P_0$ but also weakened the voltage dependency of the channel opening. The modulation of Ca-activated K channel by pH was thought to be related to the mechanism of regulation of vascular tone by the pH change.

• 대한산업공학회지
• /
• 제5권2호
• /
• pp.9-14
• /
• 1979

Inventories of finished products exist in each stage of the channel between production and consumption. An inventory has several functions, which make it possible to produce by economic lot size and to elevate services for consumer by shortening delivery time, etc$\cdots$. Finished products may be inventoried in delivery-center as well as at the plant where production takes place. So, finshed products must be dealt with as multistage inventory problem, because an inventory functions differently according to its place. The purpose of this study is to determine how much to carry in stock and what stage to carry Though there may be several channels between production and consumption, this study deals with only one main channel, that is, series of ncomponents and determines the optimal inventory policy by introducing the concept of selling probabilities.

• Design & Manufacturing
• /
• 제8권1호
• /
• pp.10-13
• /
• 2014

Plastic products are producted more than 70% of total processes by the injection molding. The injection molding process has 4 processes such as filling, packing, cooling and ejecting. It spends most of times in the cooling process. Therefore, it is important to control the mold temperature in producing plastic products. The time and system of cooling affect the product's quality and productivity. Especially, cooling time has about 60% of total injection cycle time. Therefore, we can improve a productivity by shortening cooling time. This study shows comparative study about cooling efficiency of spiral channel and baffle and observed the variation of time to freeze of molding As the result of CAE experiments, cooling rate by spiral channel had faster than baffle and as freeze time was decreased. Results of this study will be used widely to design for cooling system of injection mold.

• Design & Manufacturing
• /
• 제6권1호
• /
• pp.1-4
• /
• 2012

Plastic products are producted more than 70% of total processes in the injection molding. The injection molding process has 4 processes such as filling, packing, cooling and ejecting. It spends most of times in the cooling process. Therefore, it is important to control the mold temperature in producing plastic products. The time and system of cooling affect the product's quality and productivity. Especially, cooling time has about 60% of total injection cycle time. Therefore, we can improve a productivity by shortening cooling time. In this study, it was made a comparative study about cooling of linear channels and baffles and observed the variation of mold temperature on the coolant's temperature. As the result, the linear channel's cooling rate had faster than baffles and as coolant's temperature was increased, difference of cooling time was increased. Result of this study will be used widely to design for cooling system of injection mold.

• 한국전기전자재료학회논문지
• /
• 제11권6호
• /
• pp.428-435
• /
• 1998

SOI-like-bulk CMOS device is proposed, which having the advantages of SOI(Silicon On Insulator) and protects short channel effects efficiently with adding partial epitaxial process at standard CMOS process. SOI-like-bulk NMOS and PMOS with 0.25${\mu}{\textrm}{m}$ gate length have designed and optimized through analyzing the characteristics of these devices and applying again to the design of processes. The threshold voltages of the designed NMOS and PMOS are 0.3[V], -0.35[V] respectively and those have shown the stable characteristics under 1.5[V] gate and drain voltages. The leakage current of typical bulk-CMOS increase with shortening the channel length, but the proposed structures on this a study reduce the leakage current and improve the subthreshold characteristics at the same time. In addition, subthreshold swing value, S is 70.91[mV/decade] in SOI-like-bulk NMOS and 63.37[mV/ decade] SOI-like-bulk PMOS. And the characteristics of SOI-like-bulk CMOS are better than those of standard bulk CMOS. To validate the circuit application, CMOS inverter circuit has designed and transient & DC transfer characteristics are analyzed with mixed mode simulation.

• 대한전자공학회논문지SD
• /
• 제45권11호
• /
• pp.21-28
• /
• 2008

본 논문에서는 단 채널 GaAs MESFET의 포화영역에서의 I-V 특성을 도출하기 위한 해석적 모델을 제안하였다. 기존의 단 채널 GaAs MESFET에 대한 해석이 채널 pinch-off의 개념이 도입되는 모델이었던 반면, 본 논문에서는 저자의 소도 포화 영역이 유한한 채널 폭을 갖으면서 전류 연속 조건을 만족하도록 공핍영역의 2차원 전위 분포 식을 도출하였다. 또한 소도 포화영역의 길이를 채널 전체 길이, 채널 도핑 농도, 게이트 전압 및 드레인 전압의 함수로 도출하여 포화영역에서의 Early 효과를 보다 합리적으로 설명할 수 있음을 보이고 있다.

• 한국통신학회논문지
• /
• 제26권12A호
• /
• pp.1978-1982
• /
• 2001

다중 반송파 전송시스템에서 수신신호의 지연 확산에 따른 인접 심볼간섭 (ISI)과 인접 채널간섭 (ICI)을 제거하기 위하여 전송프레임에 삽입한 Cyclic Prefix (CP)는 시스템의 전송 효율을 저하한다. 시간영역 등화기는 채널 임펄스 응답 시간을 줄임으로써, 채널의 상태에 상관없이 CP 길이를 최소로 유지하여 시스템의 전송 효율을 개선한다. 본 논문에서는 MMSE (Minimum Mean Square Error) 방식 시간영역 등화기에 Newton 방법을 적용함으로써, 최적의 등화기 탭 계수를 추정하는 연산 시간을 단축할 수 있는 알고리즘을 제안하고 그 성능을 분석하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권5호
• /
• pp.2433-2452
• /
• 2017

Recently, the pipeline-forwarding has been proposed as a new technique to resolve the end-to-end latency problem of the duty-cycle MAC protocols in Wireless Sensor Networks (WSNs). Some protocols based on this technique such as PMAC and PRI-MAC have shown an improvement not only in terms of reducing end-to-end latency but also in terms of reducing power consumption. In these protocols, however, the sensor nodes still waste a significant amount of energy for unnecessary idle listening during contention period of upstream nodes to check the channel activity. This paper proposes a new pipeline-forwarding duty-cycle MAC protocol, named RP-MAC (Reduced Pipelined duty-cycle MAC), which tries to reduce the waste of energy. By taking advantage of ACK mechanism and shortening the handshaking procedure, RP-MAC minimizes the time for checking the channel and therefore reduces the energy consumption due to unnecessary idle listening. When comparing RP-MAC with the existing solution PRI-MAC and RMAC, our QualNet-based simulation results show a significant improvement in term of energy consumption.

• 한국컴퓨터정보학회논문지
• /
• 제22권9호
• /
• pp.25-32
• /
• 2017

In this paper, we propose the softwareization of broadcasting system. Recently, the topic of industry is the fourth industrial revolution. The fourth industrial revolution is evolving from physical to virtualization. The Industrial Revolution is based on IT technology. Artificial Intelligence (AI), Big Data, and the Internet of Things, which are famous for Alpha Go, are based on software. Among IT, software is the main driver of industrial terrain change. The systemization of software on the basis of cloud environment is proceeding rapidly. System development through softwarization can reduce time to market lead time, hardware cost reduction and manual operation compared to existing hardware system. By developing and implementing broadcasting system such as IPTV based on cloud, lead time for opening service compared to existing hardware system can be shortened by more than 90% and investment cost can be saved by about 40%. In addition, the area of the system can be reduced by 50%. In addition, efficiency can be improved between infrastructures, shortening of trouble handling and ease of maintenance. Finally, we can improve customer experience through rapid service opening.