• Nuclear Engineering and Technology
• /
• v.40 no.2
• /
• pp.139-146
• /
• 2008

This paper presents two of the fuel channel designs being considered for the CANDU-SCWR, a pressure-tube type supercritical water cooled reactor. The first is an insulated pressure tube design. The pressure tube is thermally insulated from the hot coolant by a porous ceramic insulator. Each pressure tube is in direct contact with the moderator, which operates at an average temperature of about $80^{\circ}C$. The low temperature allows zirconium alloys to be used. A perforated metal liner protects the insulator from being damaged by the fuel bundles and erosion by the coolant. The coolant pressure is transmitted through the perforated metal liner and insulator and applied directly to the pressure tube. The second is a re-entrant design. The fuel channel consists of two concentric tubes, and a calandria tube that separates them from the moderator. The coolant enters between the annulus of the two concentric fuel channel tubes, then exits the fuel channel through the inner tube, where the fuel bundles reside. The outer tube bears the coolant pressure and its temperature will be the same as the coolant inlet temperature, ${\sim}350^{\circ}C$. Advantages and disadvantages of these designs and the material requirements are discussed.

• Journal of the Korean Society of Visualization
• /
• v.19 no.3
• /
• pp.69-76
• /
• 2021

Printed circuit heat exchanger (PCHE) is a compact heat exchanger with good heat transfer performance, high structure integrity, and reliability over a wide range of temperatures and pressures. Instead of the traditional zigzag and straight shape channel, the sinusoidal shape channel was adopted in this study to investigate the relation of thermal-hydraulic performance and waviness factors (period and amplitude). The local flow characteristics and the heat flux distribution were compared to verify the effects of period and amplitude on heat transfer performance. As the period of channel becomes shorter, the rapid change of the flow direction can produce high flow separation around the corner leading to the disturbance of the boundary layer opposite wall. The nonuniform distribution of flow velocity appeared around the corner positions can promote fluid mixing and lead to higher thermal performance. An evaluation index was used to compare the comprehensive performance of PCHE considering the Nusselt number and Fanning factor. Based on the simulation results, the optimal design parameters of PCHE channel shape were found that the channel with an equivalent bending angle of 15° offers the highest heat flux capacity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.2
• /
• pp.447-460
• /
• 1996

Network optimization and design procedures often separate quality of service (QOS) performance measures from reliability issues. This paper considers channel allocation and flow assignment (routing) in a network subject to link failures. Fault-tolerant channel allocation and flow assingments are determined which minimize network cost while maintaining QOS performance requirements. this approach is shown to yield significant network cost reductions compared to previous heuristic methods used in the design of packet switched network with unreliable links.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.2
• /
• pp.3-14
• /
• 2013

In this paper, key design issues and considerations for Signal Integrity(SI) and Power Integrity(PI) of a TSV-based 3D IC are introduced. For the signal integrity and power integrity of a TSV-based 3-D IC channel, analytical modeling and analysis results of a TSV-based 3-D channel and power delivery network (PDN) are presented. In addition, various design techniques and solutions which are to improve the electrical performance of a 3-D IC are investigated.

• Journal of information and communication convergence engineering
• /
• v.8 no.3
• /
• pp.273-276
• /
• 2010

Opportunistic spectrum access (OSA) allows unlicensed users to share licensed spectrum in space and time with no or little interference to primary users, with bring new research challenges in MAC design. We propose a cognitive MAC protocol using statistical channel information and selecting appropriate idle channel for transmission. The protocol based on the CSMA/CA, exploits statistics of spectrum usage for decision making on channel access. Idle channel availability, spectrum hole sufficiency and available channel condition will be included in algorithm statistical information. The model include the control channel and data channel, the transmitter negotiates with receiver on transmission parameters through control channel, statistical decision results (successful rate of transmission) from exchanged transmission parameters of control channel should pass the threshold and decide the data transmission with spectrum hole on data channel. The proposed protocol's simulation will show that proposed protocol does improve the throughput performance via traditional opportunistic spectrum access MAC protocol.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.2
• /
• pp.1-9
• /
• 1980

A voltage synthesizing channel selection circuit was designed to improve on the conventional vol tape synthesizer which has been memorized each charnel's tuning vol cage itself. In the course of this study, tuning voltage was calculated by channel number entered from 10 keys. Then this circuit has tie function of direct access channel selection and rear display of channel number for the whole range of UHF and VHF, Attention was also given to realize the fine tuning by searching each commended channel, and the sequential selection by using 2keys, and the flash of channel indicator in case of inactive station.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.12
• /
• pp.53-58
• /
• 1998

A buried channel poly-Si TFT (BCTFT) for application of high performance integrated circuits has been proposed and fabricated. BCTFT has unique features, such as the moderately-doped buried channel and counter-doped body region for conductivity modulation, and the fourth terminal entitled back bias for preventing kink effect. The n-type and p-type BCTFT exhibits superior performance to conventional poly-Si TFT in ON-current and field effect mobility due to moderate doping at the buried channel. The OFF-state leakage current is not increased because the carrier drift is suppressed by the p-n junction depletion between the moderately-doped buried channel and the counter-doped body region.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.1
• /
• pp.117-122
• /
• 2001

Many kinds of channels are used in industrial equipment and production machinery. Although mechanical saw has been used to cut many sorts of channels, there is cost rise problem because of low productivity. Shearing of channel has a special place because it helps to cut expected shape and size easily. A channel cutting die set which can be mounted and used on a hydraulic press is developed to improve the productivity of channel cutting process. Mode for the channel cutting is divided into single cut and double cut method. This study use double cut method, and the developed channel cutting die set is composed of upper and lower die set. Shearing time can be reduced from 40 minutes to 20 seconds using the developed channel cutting die set. The productivity of channel cutting process can be increased with shearing time reduction as well as cost reduction.

• The Journal of Information Systems
• /
• v.28 no.3
• /
• pp.25-38
• /
• 2019

Purpose This study aims to empirically analyze which factors affect image and preference of YouTube beauty channels. Some practical and academic implications are presented through empirical research. Design/methodology/approach For this purpose, the six affecting factors were suggested on the basis of previous studies. We proposed image quality, user attitude, empirical value, economics, and awareness as independent variables and channel image and channel preference as dependent variables in order to investigate the causal relationships among the research variables. We surveyed 311 users who had experience in using YouTube Beauty channel and analyzed the data by using a statistical package. Findings This study showed that the channel image has a partial mediating effect between the affecting variables and the channel preference. The results provided some insights and information to increase the number of subscribers and site views. Several suggestions were carefully made.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.4
• /
• pp.467-481
• /
• 2013

The study examined the main effect of the reward channel and reward time of customer loyalty programs for on-offline shopping channels; in addition, it investigated the interaction effect of the reward channels and merchandise as well as the interaction effect of the reward time and merchandise. An online apparel shopping web experiment was conducted with a 2 (reward channel: online channel reward vs. offline channel reward) ${\times}2$ (reward time: immediate vs. delayed) ${\times}2$ (merchandise: online channel product vs. offline channel products) between-subject factorial design. An online shopping channel was considered the core-shopping channel and a department store was considered the cross-shopping channel. Loyalty program value, core-channel loyalty and cross-channel loyalty were measured as dependent variables. A total of 845 shoppers (who had experiences in shopping in both channels) participated in the experiment. The results of the study revealed (1) the main effect of the reward channel on loyalty program value, core-channel loyalty and cross-channel loyalty [online>offline channel rewards], (2) the main effect of reward time on loyalty program value, core-channel loyalty and cross-channel loyalty [immediate>delayed reward], and (3) the interaction effect of the reward channel and merchandise on loyalty program value, core-channel loyalty, and cross-channel loyalty. (4) Finally the study found that loyalty program value affected cross-channel loyalty indirectly through core-channel loyalty. This study suggested diverse theoretical and managerial implications for multi-channel retailers.