• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.256-260
• /
• 2010

It has been proved that precast slab track has advantage of rapid construction speed and good quality compared to in-situ concrete slab track. A korean precast slab track, which is named as a K-PST, was developed and had been installed on the embankment and explored on the air. The developed track system consists of precast track panel and underpouring layer which is made of cement-asphalt mortar. Consequently, poor filling of underpouring layer directly could affect on the long-term performance of the track system. As a preliminary study, the effect of the poor infilling of the underpouring in precasst slab track system on structural behavior was investigated through FEM analysis.

• KIEAE Journal
• /
• 제7권1호
• /
• pp.73-80
• /
• 2007

This paper aims to develop the diffused reflection material in order to reduce the solar absorption coefficient, and to compare the thermal properties with the different roof structure system; one is using the diffused reflection material applied the upper side of the rigid sheet waterproof system and the other is using the conventional up-side down waterproof system on the roof. For this purpose two experimental test boxes were made of same iso-panel wall and floor with different roof system. The experiment was carried out under these process; measure the surface temperature exposed solar radiation of the variation of the reflection materials(cement paste, silica, galvanized steel and titanium dioxide(TiO2)), measure and analyze the variation of the temperature distribution of the each roof system and indoor air in order to evaluate the thermal properties according to the different roof system. The result shows clearly that using the titanium dioxide(TiO2) might be more effective to reduce the solar insolation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.21-22
• /
• 2018

Foamed concrete is a porous concrete that is cured by mixing bubbles into cement slurry. It is lighter than ordinary concrete and is characterized by higher insulation. Lightweight foamed concerte is mainly used as a sandwich panel in Korea, and is also used as a refractory filler in fireproof safes. Studies on lightwight foamed concrete have been carried out on strength,density and thermal conductivity. However, it is confirmed that the research on the fire resistance performance is very limited. Based on this study, fire resistance of lightweight foamed concrete using expanded polystyrene beads is investigated.

• 유통과학연구
• /
• 제10권5호
• /
• pp.19-28
• /
• 2012

The study examines the performance and its relationship with capital structure and agency cost with respect to the industrial configurations and economic groups of Pakistan Economy. The study employs data set of 334 listed joint stock companies from the nonfinancial sectors for the period of 1999-2009 from cotton and textile, engineering, chemical, sugar, cement, fuel and energy, paper and board, transport and communication, and miscellaneous economic groups. Pooled data from the Panel data methodology has been applied to observe the significance of different performance measures through determinant of capital structure and agency costs with special focus on the leverage and cash flows as the direct determinant and interactive variables. The empirical test results using redundant variable tests demonstrate support for agency theory in the context of Pakistan's industrial configurations. The implications of the study point towards more investigations on the subject using industrial configurations as control and moderating variables.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권2호
• /
• pp.155-160
• /
• 1999

Recently, the study on mix design of lightweight concrete using the polystyrene foam balls is put into practice from the viewpoint to grade up the quality of concrete and recyclable usage of industrial by products. Polystyrene aggregate concrete, PAC, can be used as structural concrete in low strength application. For instance, PAC could be used in the middle part of sandwich panel where stresses are generally low and in the case of grid-type reinforcement where it does not need high bond strength but little compressive strength to resist the pressure of transverse reinforcement. From this point of view, the authors discussed the influence of fluidity and compressive strength of concrete by the difference of the volume percentage of polystyrene foam balls and water cement ratio.

• 한국건축시공학회지
• /
• 제11권2호
• /
• pp.127-135
• /
• 2011

본 연구에서는 단열소재 종류 및 조합의 치환률 변화에 따른 외벽단열패널의 공학적 특성에 대하여 분석하였는데, 그 결과 굳지않은 모르터의 플로우의 경우 단열소재 치환률이 증가할수록 급격히 저하되는 결과를 나타내었으며, 공기량의 경우 단열소재 치환률이 증가될수록 점차 증가되는 결과를 나타내었다. 경화 모르터의 휨강도의 경우 단열소재 치환률이 증가될수록 전반적으로 플레인에 비해 점차 강도가 저하되는 경향을 나타내었으나 PL 2% 치환 시 증가되는 결과를 나타내었다. 열전도율의 경우 단열소재 치환률이 증가될수록 급격히 낮아지는 경향을 나타내었으며, 단위용적 질량과 열전도율의 상관관계의 경우 단위용적질량이 감소할수록 열전도율은 우수한 결과를 나타내었다. 단열소재 종류 및 조합에 따른 휨강도의 경우 전반적으로 플레인과 유사한 강도값을 나타내었으나 V+CB+PL을 3% 치환한 조합의 경우 모르터 내부가 밀실해짐에 따라 강도값이 증가되는 결과를 나타내어 단열소재 종류 및 조합 가운데 가장 우수한 결과를 도출할 수 있었다.

• 한국건설순환자원학회논문집
• /
• 제5권2호
• /
• pp.83-90
• /
• 2010

As a reinforced fabric, asbestos has been utilized as a fire-resistant material as it has a superior flexural stiffness and heat resistance up to $1500^{\circ}C$. However, due to its harmfulness, its use has been prohibited recently and the even the installed asbestos materials are being repaired or supplemented if there is a concern about flying. Asbestos is mainly used for construction panels as a reinforced fabric and coating materials to ensure the fire-resistance of steel frames. Asbestos was used as fire-resistant materials for steel frames until 1991 and then prohibited as Act on Industrial Safety and Health limits the concentration of asbestos in the air. Classified as a designated waste according to Act on Waste Control, asbestos must be buried if there is no possibility of flying (panel-type materials) or cement-solidified and then buried if there is a possibility of flying (spray coating material) In general, it is required that a new waste landfill include a certain landfill facility for designated waste, but in reality there is an absolute storage of landfill facilities for designated waste as they only install facilities of the size required by the regulations. This could result in the 2nd environmental pollution as they cannot process asbestos wastes which will be generated in large volume in the future. This study explores a method that melts asbestos wastes at $700^{\circ}C$ rather than cement-solidifying the waste asbestos from construction sites, especially asbestos-containing spray coating. The study results showed that there was no change in the composition and shape even though asbestos wastes was melted at $1300^{\circ}C$, but there was a change for the specimen which was process in advance for low temperature melting and then melt at $900^{\circ}C$.

• 한국건축시공학회지
• /
• 제10권2호
• /
• pp.89-96
• /
• 2010

본 연구에서는 섬유의 종류에 따른 고인성 모르타르의 역학 및 내구특성을 비롯한 ECC내화패널의 역학 및 내화특성을 평가한 결과 고장력 PVA섬유를 활용하여 ECC내화패널을 제작하여 역학 및 내화특성을 검토한 결과 국토해양부 관리기준에서의 3시간 내화성능을 확보할 수 있었으며, 폭렬 억제 효과가 있는 것으로 확인되었다. 또한, 역학적 특성 평가결과 일반 고강도 콘크리트 시험체에 비해, 압축강도 및 압축강성이 증가하는 것으로 나타났으며, 연성비도 크게 증가되는 것이 확인되었다. 본 연구 결과 ECC내화패널의 구속효과에 의한 고강도 콘크리트 부재의 역학적 성능을 향상시킬 수 있는 것으로 나타났으며, 변형능력도 크게 향상되는 것으로 나타나, 향후 내화패널의 제조공법 및 현장 조립공법에 대한 지속적인 연구를 통해 기존 PC공법의 단점을 해결할 수 있는 초고층 건축물의 새로운 PC공법으로의 개발이 기대된다.

• The Journal of Asian Finance, Economics and Business
• /
• 제4권1호
• /
• pp.5-18
• /
• 2017

Total debt in the People's Republic of China surged to nearly 290% as a ratio to GDP by the second quarter of 2016, mostly on account of non-financial corporate debt. The outpouring of credit to stem the impact of the global financial crisis accentuated industrial overcapacity in traditional sectors, such as steel, cement, and energy, while feeding asset bubbles in the property, equity and bond markets. At the Chinese corporate level, this has translated into weakened fundamentals and a fall in industrial profits, particularly of SOEs. As debtors struggle to service interest payments, non-performing loans (NPLs) have been on the rise. This paper assesses the financial fragility of the Chinese economy by looking at risk factors in the non-financial sector. We apply quantile regressions to a dataset containing all Chinese listed companies in Standard & Poor's IQ Capital database. We find higher sensitivity over time of corporate leverage to some of its key determinants, particularly for firms at the upper margin of the distribution. In particular, profitability increasingly acts as a curb on corporate leverage. At a time of falling profitability across the Chinese non-financial corporate sector, this eases the brake on leverage and may contribute to its continuing increase.

• 한국건설순환자원학회논문집
• /
• 제5권1호
• /
• pp.21-28
• /
• 2017

최근 원자력 발전소 및 LNG 탱크의 외벽을 제작하는데 있어 강판 콘크리트(steel-plate concrete, SC)와 같은 합성형 구조모듈(steel-plate concrete panel, SCP)의 사용이 증가하고 있다. SCP는 공장에서 생산 한 후 이송되므로, 이송에 드는 비용을 줄이기 위해 경량화가 필수적이다. 이때 경량골재 콘크리트를 사용해 SCP의 내부를 채워 밀도를 낮출 수 있지만, 현재 콘크리트 배합법은 콘크리트의 품질을 확보하기 위해 경량골재의 사용량이 제한되어 경량화에 한계가 있다. 본 연구에서 제안하는 프리플레이스트 경량 콘크리트 배합법은 거푸집 내 경량골재를 먼저 채운 후(pre-packing) 그라우트를 주입하는 공법으로, 콘크리트의 품질확보 및 밀도를 낮출 수 있다. 다양한 종류의 경량골재 및 그라우트 배합을 사용해 실험을 수행하였고, 밀도 $1,600kg/m^3$, 압축강도 30MPa급 프리플레이스트 경량 콘크리트 배합비를 선정하여 SCP 시편을 제작하였다. 제작된 SCP 시편의 구조성능 시험을 위해 3점 휨 실험을 수행하였다. 고유동 콘크리트를 사용해 SCP의 내부를 채운 시편과 비교해 프리플레이스트 경량 콘크리트를 사용해 제작된 SCP 시편은 비슷한 수준의 휨 저항 성능을 보였으며 밀도가 30% 이상 낮았다. 따라서 프리플레이스트 경량 콘크리트를 사용해한 SCP 제작 시, 기존의 SCP와 비슷한 수준의 구조성능을 가지며 밀도를 낮춰 이송 비용을 감축할 수 있을 것으로 기대된다.