• BMB Reports
• /
• 제51권8호
• /
• pp.412-417
• /
• 2018

Homotypic cell-in-cell (CIC) structures forming between cancer cells were proposed to promote tumor evolution via entosis, a nonapoptotic cell death process. However, the mechanisms underlying their formation remained poorly understood. We performed a microarray analysis to identify genes associated with homotypic CIC formation. Cancer cells differing in their ability to form homotypic CIC structures were selected for the study. Association analysis identified 73 probe sets for 62 candidate genes potentially involved in CIC formation. Among them, twenty-one genes were downregulated while 41 genes were upregulated. Pathway analysis identified a gene interaction network centered on IL-8, which was upregulated in high CIC cells. Remarkably, CIC formation was significantly inhibited by IL-8 knockdown and enhanced upon recombinant IL-8 treatment, which correlated with altered cell-cell adhesion and expression of adhesive molecules such as P-cadherin and ${\gamma}$-catenin. Together, our work identified IL-8 as a positive regulator of homotypic CIC formation via enhancing intercellular adhesion.

• Journal of Periodontal and Implant Science
• /
• 제25권1호
• /
• pp.133-145
• /
• 1995

The migration and proliferation of periodontal ligament cells are desired goal of periodontal regeneration therapy. PDGF and $TGF-{\beta}1$ are well known to regulate the cell activity of mesenchymal origin cell. The purpose of this study was to determine the effects of these growth factors on human gingival fibroblast and periodontal ligament cell actvity, and to identify the regulatory effect of $TGF-{\beta}1$ on the response to PDGF by MIT assay. Human gingival fibroblast and periodontal ligament cells were cultured from extracted teeth for non-periodontal reason. Cultured human gingival fibroblast and periodontal ligament cells in vitro were treated with polyperpetide growth factor PDGF and $TGF-{\beta}1$ in both a dose and time - dependent manner. Cell morphology were determined by inverted microscope and cell acitivity were determined by MIT assay. The result of this study demonstrated that PDGF and $TGF-{\beta}1$ were not changed the morphology of these cell compared with control group. PDGF or $TGF-{\beta}1$ increased cell activity of periodontal ligament cell in dose and time dependent manner but gingival fibroblast were decreased to the level of control group at third day. Additionally, incubation with $TGF-{\beta}1$ addition to PDGF resulted in a enhanced cell activity of PDGF. Therefore, cell acitivty of gingival fibroblast were not changed compared with control group. This stiudy demonstrates that PDGF and $TGF-{\beta}1$ are major mitogens for human periodontal ligament cell in vitro, and $TGF-{\beta}1$ is a regulator of cell activity to PDGF in human gingival fibroblast and periodontal ligament cell.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.13-16
• /
• 2008

Solid oxide fuel cell(SOFC) is an electrochemical energy conversion system with high efficiency and low-emission of pollution. In order to reduce the operating temperature of SOFC system under $800^{\circ}C$, the thickness reduction of YSZ electrolyte to be as thin as possible, e.g., less than 10 ${\mu}m$ are considered with the microstructure control and optimum design of unit cell. Methods for reducing the thickness of YSZ electrolyte have been investigated in coin cell. Moreover, a large unit cell($8cm{\times}8cm$) for SOFC was fabricated using an anode-supported electrolyte assembly with a thinner electrolyte layer, which was prepared by a tape casting method with a co-sintering technique. we studied the design factors such as active layer, electrolyte thickness, cathode composition, etc,. by the coin type of unit cell ahead of the fabrication process of a large unit cell and also reviewed about the evaluation technique of a large size unit cell such as interconnect design, sealing materials and current collector and so forth. Electrochemical evaluations of the unit cells, including measurements such as power density and impedance, were performed and analyzed. Maximum power density and polarization impedance of coin cell were 0.34W/$cm^2$ and $0.45{\Omega}cm^2$ at $800^{\circ}C$, respectively. However, Maxium power density of a large unit cell($5cm{\times}5cm$) decreased to 0.21W/$cm^2$ at $800^{\circ}C$ due to the increase of ohmic resistance. However, It was found that the potential value of a large unit cell loaded by 0.22A/$cm^2$ showed 0.76V at 100hrs without the degradation of unit cell.

• 동의생리병리학회지
• /
• 제18권4호
• /
• pp.995-1000
• /
• 2004

This study was purposed to investigate the effect of Gamgung-tang(GGT) on immune responses induced by glucocorticoid in mice. GGT solution was treated by intraperitoneal injection for 7 days after glucocorticoid treatment(80㎎/㎏). And then B and T cell proliferation and cytolytic activity of natural killer(NK) cells were measured. There was 25% inhibition in B cell proliferation with treatment of glucocorticoid. However, B cell proliferation was not influenced by GGT treatment. T cell proliferation was also inhibited by 18.4% with treatment of glucocorticoid. On the other hand, T cell proliferation was increased dose-dependent manner in GGT treated group. Furthermore in purified T cell, the proliferation was furtherly increased than non-purified T cell. At concentration of 18㎎/mouse GGT, purified T cell proliferation was increase to above level of normal group. The cytotoxic activity of NK cell was decreased by 35.3% with treatment of glucocorticoid. In GGT treated group, the cytotoxic activity of NK cell was increased to the normal level. In purified NK cell, the cytolytic activity of NK cell was further increased than non-purifed NK cell. These results suggest that GGT may proliferate T cell that is suppressed by glucocorticoid, and activate NK cell activity.

• 한국산학기술학회논문지
• /
• 제14권5호
• /
• pp.2524-2528
• /
• 2013

일반적인 독립기포형 경질폴리우레탄 폼을 만들기 위한 formulation으로부터 개방기포형 경질 우레탄 폼을 얻기 위하여 반응성 기포개방제로서 1-butanol 및 12HSA (12-hydroxystearic acid)의 금속염인 Li-12HSA를 첨가제로 사용하여 만들어진 샘플의 물성과 기포개방 특성에 관한 연구를 진행하였다. 4.0 phr의1-butanol을 단독으로 사용할 때에 비하여 2 phr의 Li-12HSA를 복합하여 사용할 때의 기포개방율은 10.5%에서 98.0%로 현저한 개선효과를 나타내었다. 연구의 결과로서, 반응에 의하여 부피가 큰 막대형 분자를 우레탄 측쇄로 도입함으로서 독립기포형 경질 우레탄 폼의 기포크기나 밀도, 및 열전도율 등의 큰 변화없이 완전 개방기포형 경질 우레탄 폼을 얻을 수 있음을 보여주었다.

• Fisheries and Aquatic Sciences
• /
• 제19권4호
• /
• pp.16.1-16.8
• /
• 2016

To culture germline stem cells in vitro, establishment of the cell lines that can be used as the feeder cells is a prerequisite. In this study, we tried to establish gonad-derived cell lines in Siberian sturgeon (Acipenser baerii). Five 1-year-old A. baerii were used as a donor of gonad tissues, and gonad-dissociated cells were cultured in vitro. Subsequently, determination of growth conditions, long-term culture, characterization, and cryopreservation of the cell lines were also conducted. Five gonad-derived cell lines were stably established and cultured continuously over at least the 73th passage and 402 culture days under the media containing 20 % fetal bovine serum at $28^{\circ}C$. All cell lines consisted of two main cell types based on morphology even if the ratio of the two cell types was different depending on cell lines. Despite long-term culture, all cell lines maintained diploid DNA contents and expression of several genes that are known to express in the A. baerii gonad. After freezing and thawing of the cell lines, post-thaw cell viabilities between 57.6 and 92.9 % depending on cell lines were indentified, suggesting that stable cryopreservation is possible. The results and the cell lines established in this study will contribute to the development of an in vitro system for A. baerii germline stem cell culture.

• 한국컴퓨터산업학회논문지
• /
• 제6권5호
• /
• pp.757-766
• /
• 2005

There have been great demands for higher density SRAM in all area of SRAM applications, such as mobile, network, cache, and embedded applications. Therefore, aggressive shrinkage of 6T Full CMOS SRAM had been continued as the technology advances, However, conventional 6T Full CMOS SRAM has a basic limitation in the cell size because it needs 6 transistors on a silicon substrate compared to 1 transistor in a DRAM cell. The typical cell area of 6T Full CMOS SRAM is $70{\sim}90F^{2}$, which is too large compared to $8{\sim}9F^{2}$ of DRAM cell. With 80nm design rule using 193nm ArF lithography, the maximum density is 72M bits at the most. Therefore, pseudo SRAM or 1T SRAM, whose memory cell is the same as DRAM cell, is being adopted for the solution of the high density SRAM applications more than 64M bits. However, the refresh time limits not only the maximum operation temperature but also nearly all critical electrical characteristics of the products such as stand_by current and random access time. In order to overcome both the size penalty of the conventional 6T Full CMOS SRAM cell and the poor characteristics of the TFT load cell, we have developed $S^{3}$ cell. The Load pMOS and the Pass nMOS on ILD have nearly single crystal silicon channel according to the TEM and electron diffraction pattern analysis. In this study, we present $S^{3}$ SRAM cell technology with 100nm design rule in further detail, including the process integration and the basic characteristics of stacked single crystal silicon TFT.

• 한국전기전자재료학회논문지
• /
• 제19권4호
• /
• pp.314-321
• /
• 2006

There have been great demands for higher density SRAM in all area of SRAM applications, such as mobile, network, cache, and embedded applications. Therefore, aggressive shrinkage of 6 T Full CMOS SRAM had been continued as the technology advances. However, conventional 6 T Full CMOS SRAM has a basic limitation in the cell size because it needs 6 transistors on a silicon substrate compared to 1 transistor in a DRAM cell. The typical cell area of 6 T Full CMOS SRAM is $70{\sim}90\;F^2$, which is too large compared to $8{\sim}9\;F^2$ of DRAM cell. With 80 nm design rule using 193 nm ArF lithography, the maximum density is 72 Mbits at the most. Therefore, pseudo SRAM or 1 T SRAM, whose memory cell is the same as DRAM cell, is being adopted for the solution of the high density SRAM applications more than 64 M bits. However, the refresh time limits not only the maximum operation temperature but also nearly all critical electrical characteristics of the products such as stand_by current and random access time. In order to overcome both the size penalty of the conventional 6 T Full CMOS SRAM cell and the poor characteristics of the TFT load cell, we have developed S3 cell. The Load pMOS and the Pass nMOS on ILD have nearly single crystal silicon channel according to the TEM and electron diffraction pattern analysis. In this study, we present $S^3$ SRAM cell technology with 100 nm design rule in further detail, including the process integration and the basic characteristics of stacked single crystal silicon TFT.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제27권6호
• /
• pp.535-542
• /
• 2001

The purpose of this study was to examine the mRNA levels of TNF-${\alpha}$ and IL-6 in the cell lines of normal oral keratocyte and oral squamous cell carcinoma. Total RNA was extracted from these cell lines, observed under UV light, developed by radiographic films of PCR products via reverse transcriptase polymerase chain reaction(RT-PCR) amplication, and measured with densitometer. Each mRNA level of these cell lines divided by ${\beta}$-actin mRNA level was compared to that of normal control group. The results were as follows: 1. Higher mRNA expression of TNF-${\alpha}$ than IL-6 in the normal oral epithelial cell line. 2. In general, expression of mRNA of IL-6 appeared 3-4 times more in tumor cell lines than in control group. 3. mRNA expression of TNF-${\alpha}$ showed variable expression in tumor cell lines, unlike normal cell line. 4. There are no special connections between differentiation of oral cancer cell lines and mRNA expression of TNF-${\alpha}$ and IL-6. From the above results, expression of mRNA of IL-6 in the cell lines of squamous cell carcinoma used in this study has higher than the normal oral epithelial cell line, but there are no relationship between the differentiation of oral cancer cell lines and the expression of mRNA of TNF-${\alpha}$ and IL-6.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제36권1호
• /
• pp.7-15
• /
• 2010

Complex human tissues harbor stem cells and precursor cells, which are responsible for tissue development or repair. Recently, dental tissues such as dental pulp, periodontal ligament (PDL), dental follicle have been identified as easily accessible sources of undifferentiated cells. These tissues contain mesenchymal stem cells that can be differentiate into bone, cartilage, fat or muscle by exposing them to specific growth conditions. In this study, the authors procured the stem cell from pulp, PDL, and dental follicle and differentiate them into osteoblast and examine the bone induction capacity. Dental pulp stem cell (DPSC), periodontal ligament stem cell (PDLSC), and dental follicle precursor cell (DFPC) were obtained from human 3rd molar and cultured. Each cell was analyzed for presence of stem cell by fluorescence activated cell sorter (FACs) against CD44, CD105 and CD34, CD45. Each stem cell was cultured, expanded and grown in an osteogenic culture medium to allow formation of a layer of extracellular bone matrix. Osteogenic pathway was checked by alizarin red staining, alkaline phosphatase (ALP) activity test and RT-PCR for ALP and osteocalcin (OCN) gene expression. According to results from FACs, mesenchymal stem cell existed in pulp, PDL, and dental follicle. As culturing with bone differentiation medium, stem cells were differentiated to osteoblast like cell. Compare with stem cell from pulp, PDL and dental follicle-originated stem cell has more osteogenic effect and it was assumed that the character of donor cell was able to affect on differential potency of stem cell. From this article, we are able to verify the pulp, PDL, and dental follicle from extracted tooth, and these can be a source of osteoblast and stem cell for tissue engineering.