• 한국진공학회지
• /
• 제21권4호
• /
• pp.219-224
• /
• 2012

태양광에 노출되어있는 동안 비정질실리콘 태양전지에서 일어나는 장시간 성능변화에 대해서 연구하였다. 그리고 결함밀도의 운동학 모형을 통해서 태양광으로 인한 태양전지 성능변화를 예측하였다. 특히, 전하운반자 수명이 결함밀도에 의해서 크게 영향을 받기 때문에 비정질실리콘 태양전지의 광유도 성능감소(light-induced degradation)가 확장지수함수 완화법칙(stretched-exponential relaxation)을 따르는 결함밀도에 의해서 물리적으로 설명된다. 그리고 확장지수함수 완화법칙과AMPS-1D 컴퓨터 프로그램의 모의실험에 의해서 비정질실리콘 태양전지의 광유도 성능감소를 계산했고, 모의실험의 결과를 옥외에 설치한 태양전지의 측정데이터에 비교하였다. 본 연구는 상온에서 다음과 같은 특성을 갖는 전형적인 비정질실리콘pin 태양전지에 대해서 모의실험을 진행했다: 두께${\approx}$300 nm, 내부전위${\approx}$1.05 V, 초기 결함밀도${\approx}5{\times}10^{15}cm^{-3}$, 초기 단락전류${\approx}15.8mA/cm^2$, 초기 채우기비율${\approx}0.691$, 초기 개방전압${\approx}0.865V$, 초기 변환효율${\approx}9.50%$.

• 한국수자원학회논문집
• /
• 제57권5호
• /
• pp.347-357
• /
• 2024

많은 연구에서 비점착성 부유사의 입경분포를 평균입경와 표준편차를 이용해 묘사한다. 그러나 부유사는 크기가 다른 많은 입자의 혼합물로 구성되어 있다. 난류조건에서 부유사의 이동은 크기와 밀도로부터 계산된 침강속도에 영향을 받는다. 따라서 비점착성 부유사의 이동을 이해하려면 입경 분포를 보다 정량적으로 고려하는 것이 중요하다. 본 연구의 목적은 난류조건에서 부유사의 입경분포를 모의할 수 있는 간편한 모형화 방법을 제시하는 것이다. 점착성 유사와 비점착성 유사의 차이에 대한 이해를 바탕으로, 점착성 부유사를 위한 추계학적 응집 모형을 비점착성 유사의 입경분포 모의에 적합하도록 수정하였다. 본 연구에서 제안하는 간편법의 적용성을 살펴보기 위해 선행연구의 실험자료에 적용하여 모의 결과와 비교하였다. 수치 모의의 결과를 통해 본 연구에서 제안한 모형이 실험값에서 나타나는 주요한 특성을 모사할 수 있다는 점을 확인하였다. 이를 바탕으로 유사 이동 모형을 사용하여 부유사 입경분포를 모의하는 접근 방식이 부유사 입경분포의 중요한 특성을 이해하기에 효과적이라는 결론을 얻었다.

• Journal of electromagnetic engineering and science
• /
• 제6권2호
• /
• pp.135-145
• /
• 2006

This paper presents the theory, design, fabrication and characterization of the novel low actuation voltage capacitive shunt RF-MEMS switch using a corrugated membrane with HRS MEMS packaging. Analytical analyses and experimental results have been carried out to derive algebraic expressions for the mechanical actuation mechanics of corrugated membrane for a low residual stress. It is shown that the residual stress of both types of corrugated and flat membranes can be modeled with the help of a mechanics theory. The residual stress in corrugated membranes is calculated using a geometrical model and is confirmed by finite element method(FEM) analysis and experimental results. The corrugated electrostatic actuated bridge is suspended over a concave structure of CPW, with sputtered nickel(Ni) as the structural material for the bridge and gold for CPW line, fabricated on high-resistivity silicon(HRS) substrate. The corrugated switch on concave structure requires lower actuation voltage than the flat switch on planar structure in various thickness bridges. The residual stress is very low by corrugating both ends of the bridge on concave structure. The residual stress of the bridge material and structure is critical to lower the actuation voltage. The Self-alignment HRS MEMS package of the RF-MEMS switch with a $15{\Omega}{\cdot}cm$ lightly-doped Si chip carrier also shows no parasitic leakage resonances and is verified as an effective packaging solution for the low cost and high performance coplanar MMICs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권1호
• /
• pp.1-21
• /
• 2013

The release of IEEE 802.15.4e specification significantly develops IEEE 802.15.4. The most inspiring improvement is the enhancement for medium access control (MAC) sublayer. To study the performance of IEEE 802.15.4e MAC, in this paper we first present an overview of IEEE 802.15.4e and introduce three MAC mechanisms in IEEE 802.15.4e. And the major concern here is the Time Slotted Channel Hopping (TSCH) mode that provides deterministic access and increases network capacity. Then a detailed analytical Markov chain model for TSCH carrier sense multiple access with collision avoidance (CSMA-CA) is presented. Expressions which cover most of the crucial issues in performance analysis such as the packet loss rate, energy consumption, normalized throughput, and average access delay are presented. Finally the performance evaluation for the TSCH mode is given and we make a comprehensive comparison with unslotted CSMA-CA in non-beacon enabled mode of IEEE 802.15.4. It can validate IEEE 802.15.4e network can provide low energy consumption, deterministic access and increase network capacity.

• Bulletin of the Korean Chemical Society
• /
• 제34권6호
• /
• pp.1800-1808
• /
• 2013

Dual-responsive amphiphilic block copolymers were synthesized by combining enzymatic ring-opening polymerization (eROP) of ${\varepsilon}$-caprolactone (CL) and ATRP of N,N-dimethylamino-2-ethyl methacrylate (DMAEMA). The obtained block copolymers were characterized by gel permeation chromatography (GPC), $^1H$ NMR and FTIR-IR. The critical micelle concentration (CMC) of copolymer was determined by fluorescence spectra, it can be found that with hydrophilic block (PDMAEMA) increasing, CMC value of the polymer sample increased accordingly, and the CMC value was 0.012 mg/mL, 0.025 mg/mL and 0.037 mg/mL for $PCL_{50}$-b-$PDMAEMA_{68}$, $PCL_{50}$-b-$PDMAEMA_{89}$, $PCL_{50}$-b-$PDMAEMA_{112}$, $PCL_{50}$-b-$PDMAEMA_{89}$ was chosen as drug carrier to study in vitro release profile of anti-cancer drug (taxol). The temperature and pH dependence of the values of hydrodynamic diameter (Dh) of micelles, and self-assembly of the resulting block copolymers in water were evaluated by dynamic light scattering (DLS). The result showed that with the temperature increasing and pH decreasing, the Dh decreased. Drug-loaded nanoparticles were fabricated using paclitaxel as model. Transmission electron microscopy (TEM) and atomic force microscopy (AFM) had been explored to study the morphology of the hollow micelles and the nanoparticles, revealing well-dispersed spheres with the average diameters both around 80 nm. In vitro release kinetics of paclitaxel from the nanoparticles was also investigated in different conditions (pH and temperature, etc.), revealing that the drug release was triggered by temperature changes upon the lower critical solution temperature (LCST) at pH 7.4, and at $37^{\circ}C$ by an increase of pH.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.144-145
• /
• 2009

Single crystal $CdGa_2Se_4$ layers were grown on a thoroughly etched semi-insulating GaAs(100) substrate at $420^{\circ}C$ with the hot wall epitaxy (HWE) system by evaporating the poly crystal source of $CdGa_2Se_4$ at $630\;^{\circ}C$. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of single crystal $CdGa_2Se_4$ thin films measured with Hall effect by van der Pauw method are $8.27\;\times\;10^{17}\;cm^{-3}$, $345\;cm^2/V{\cdot}s$ at 293 K, respectively. The photocurrent and the absorption spectra of $CdGa_2Se_4$/SI(Semi-Insulated) GaAs(100) are measured ranging from 293 K to 10K. The temperature dependence of the energy band gap of the $CdGa_2Se_4$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g$(T) = 2.6400 eV - ($7.721\;{\times}\;10^{-4}\;eV/K)T^2$/(T + 399 K). Using the photocurrent spectra and the Hopfield quasi cubic model, the crystal field energy(${\Delta}cr$) and the spin-orbit splitting energy(${\Delta}so$) for the valence band of the $CdGa_2Se_4$ have been estimated to be 106.5 meV and 418.9 meV at 10 K, respectively. The three photocurrent peaks observed at 10 K are ascribed to the $A_1$-, $B_1$-, and $C_{11}$-exciton peaks.

• 대한전자공학회논문지SD
• /
• 제42권4호
• /
• pp.1-8
• /
• 2005

소오스와 드레인 근처에 포켓이온이 주입된 halo구조의 MOSFET에서 전송자의 이동도 감소는 포켓이온주입의 조건에 따라 이온화된 불순물의 증가에 따른 쿨롱(Coulomb) 산란율의 증가에 의한 이동도의 감소량보다 큰 이동도의 감소가 관측될 수 있다. 게이트 바이어스에 대한 이동도의 특성변화도 기존의 일차적인 쿨롱산란의 증가효과에 의한 해석과 비교하여 상이한 결과가 나타날 수 있음이 실험적으로 확인되고 있다. 본 연구에서는 포켓이온 주입에 의하여 쿨롱산란원이 되는 유효불순물 농도의 증가에 따른 일차적인 이동도의 감소효과를 벗어난 이동도 특성을 분석하여 이동도의 감소현상을 일반적으로 설명할 수 있는 개선된 해석적 모델을 제시하였다. 해석적인 결과를 도출하기 위하여 일차원 영역구분의 근사방법을 적용한 결과, 포켓이온 주입에 의하여 포논산란율 및 표면산란율(surface roughness scattering rate)의 증가도 이동도감소에 기여함이 보여 졌다. 채널의 전송자분포가 드레인 전류에 영향을 미치게 되므로 포켓이온에 의해 유발된 전송자분포의 효과를 분석하여 유효이동도가 추가적으로 감소함을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.218-223
• /
• 1993

In this paper, we present a full digital control scheme which controls currents and speed of the permanent magnet AC servo motor with large range of bandwidth and high performance. The current equations of the permanent magnet AC servo motor are linearized by feedback linearization technique. Both acceleration feedforward terms and IP controllers, whose gains are functions of motor speed, are used in order to control motor currents. In addition the phase delays in current control loops are compensated by placing phase lead-lag compensators after current commands, which make it possible to avoid high gains in the current controllers. Unity power factor can be achieved by the proposed current controller. Pulsewidth modulation is performed by way of the well-known comparison with a triangular carrier signals. The velocity controller is designed on the basis of the linearized model of the permanent magnet AC servo motor by the proposed current controller. The performance of the entire control system is analyzed in the presence of uncertainty in the motor parameters. The proposed control scheme is implemented using the digital signal processor-based controller composed of an Analog Device ADSP 2111 and a NEC78310. The pulsewidth modulation (PWM) signals are generated through a custom IC, SAMSUNG-PWM1, which has the outputs of current controllers as input. The experimental results show that the permanent magnet AC servo motor can be always driven with high dynamic performance by the proposed full digital control scheme of motor speed and motor current.

• 한국해양공학회지
• /
• 제28권4호
• /
• pp.314-323
• /
• 2014

In this study, a gearbox and blade were modeled in the MASTA program, and the housing and carrier components were modeled using a finite element method. Using substructure synthesis, all the components were combined and used to establish a vibration model of a 2.5-MW wind turbine gearbox. In addition, the safety displacement factor was evaluated using an AGMA data sheet about bearing's outer race for the input shaft and output shaft. As a result, the bearing's outer race for the input shaft, and the radial and axial responses were satisfied by the $1^{st}$ and $2^{nd}$ planetary gears and the $3^{nd}$ helical gear transmission error(TE), respectively. However, the output shaft support bearing's outer race responses were not satisfied with the radial response by the $2^{nd}$ TE and axial response by the $3^{rd}$ TE. To reduce the vibration, tooth modification was needed. After profile tooth modification, at the outer race of the output shaft support bearing, the radial response was reduced by approximately $20{\mu}m$, and the axial response was reduced by approximately $6{\mu}m$.

• 한국전자파학회논문지
• /
• 제21권6호
• /
• pp.635-641
• /
• 2010

이중 선택적 채널 OFDM(Orthogonal Frequency Division Multiplexing) 시스템에서 시변 채널 특성은 주파수 영역에서 부반송파 사이의 간섭 현상으로 나타난다. 시간 영역 윈도우의 사용은 주파수 영역 채널 행렬의 대역폭을 한정시키는 효과가 있으며, OFDM 시스템을 간략화된 선형 입출력 모델로 근사화시킬 수 있다. OFDM 시스템의 채널 등화에 선형 MMSE(Minimum Mean Square Error) 예측에 기반한 순차적인 간섭 제거 기법을 사용하는 경우, 심볼의 검출 순서가 전체적인 시스템 성능에 큰 영향을 미친다. 본 논문에서는 시간 영역 윈도우의 사용으로 인한 잔류 ICI의 감소와 이에 따른 성능 개선 효과를 확인하고, SINR(Signal to Interference and Noise Ratio)과 CSEP(Conditional Symbol Error Probability) 값을 기준으로 하는 심볼 검출 순서가 순차적 간섭 제거 방식의 성능에 미치는 영향을 조사한다.