• 대한전자공학회논문지SD
• /
• 제42권9호
• /
• pp.9-18
• /
• 2005

60 nm C-MOSFET 기술 분기점 이상의 고성능, 저전력 트랜지스터를 구현 시키기 위해 SiGe/SiO2/Si위에 성장된 strained Si의 두께가 전자 이동도에 미치는 영향을 두 가지 관점에서 조사 연구하였다. 첫째, inter-valley phonon 산란 모델의 매개변수들을 최적화하였고 둘째, strained Si 반전층의 2-fold와 4-fold의 전자상태, 에너지 밴드 다이어그램, 전자 점유도, 전자농도, phonon 산란율과 phonon-limited 전자이동도를 이론적으로 계산하였다. SGOI n-MOSFET의 전자이동도는 고찰된 SOI 구조의 Si 두께 모든 영역에서 일반적인 SOI n-MOSFET보다 $1.5\~1.7$배가 높음이 관찰 되었다. 이러한 경향은 실험 결과와 상당히 일치한다. 특히 strained Si의 두께가 10 nm 이하일 때 Si 채널 두께가 6 nm 보다 작은 SGOI n-MOSFET에서의 phonon-limited 전자 이동도는 일반 SOI n-MOSFET과 크게 달랐다. 우리는 이러한 차이가 전자들이 suained SGOI n-MOSFET의 반전층에서 SiGe층으로 터널링 했기 때문이고, 반면에 일반 SOI n-MOSFET에서는 캐리어 confinement 현상이 발생했기 때문인 것으로 해석하였다. 또한 우리는 10 nm와 3 nm 사이의 Si 두께에서는 SGOI n-MOSFET의 phonon-limited 전자 이동도가 inter-valley phonon 산란율에 영향을 받는 다는 것을 확인하였으며, 이러한 결과는 더욱 높은 드레인 전류를 얻기 위해서 15 nm 미만의 채널길이를 가진 완전공핍 C-MOSFET는 stained Si SGOI 구조로 제작하여야 함을 확인 했다

• Journal of Advanced Marine Engineering and Technology
• /
• 제41권4호
• /
• pp.337-344
• /
• 2017

환경 문제로 인해 기존 연료를 대체하는 천연가스의 수요가 증가하고 있다. 이에 따라, 액화천연가스 운반선의 화물창이 거대화되면서 화물창 내의 슬로싱 하중이 증가하게 된다. 액화천연가스 화물창의 종류 중 하나인 Mark-III 타입의 1차 방벽은 액화천연가스와 직접적으로 접촉하고 있으며 슬로싱 하중 및 액화천연가스의 자중을 받는다. 슬로싱 하중에 의해 다양한 범위의 하중이 1차 방벽에 지속적으로 작용하며 이로 인해 피로 파괴를 유발할 수 있다. 따라서 본 연구에서는 Mark-III 타입의 1차 방벽을 포함한 단열시스템을 유한요소 모델로 구성하였으며 1차 방벽에 대해 피로수명을 평가하여 피로 특성을 확인하였다. 수치해석을 통해 주응력 범위 및 최대 주응력이 발생하는 위치를 계산하였으며 이를 통해 1차 방벽의 피로수명을 수치적으로 평가하였다. 또한, 다양한 단열시스템 타입에 대해 모델링을 실시하였으며, 피로수명 평가 결과를 통해 1차 방벽의 피로 파괴 안전성을 확보하는 최적의 단열시스템에 대해 제안하였다. 본 연구의 결과는 Mark-III 타입 1차 방벽의 피로 기반 설계에 있어 활용가치가 있을 것으로 판단된다.

• 대한예방한의학회지
• /
• 제8권2호
• /
• pp.55-63
• /
• 2004

Objectives : This study was designed to identify the possibility of aroma oils as the complementary medical goods specially for the effects of aromatheraphy on xerosis cutis. Materials and Methods : The participants were 23 adult patients and all participants of this study use aroma oils which is known to effect on xerosis cutis. The subjects consist of voluntary patients with xerosis cutis in Seong-So Hospital in Andong Kyoungbuk, Korea. From April 1st to April 30th, 2004 for 4 weeks, the subjects massaged aroma oils on itching parts or the whole body. Aroma oils were Lavender, Losemary, Jasmine and blended drop by drop per 10ml jojoba oil which used a carrier oil. Skin pH was measured with a skin pH meter(Model : HI98110, Se-Chang instruments, made in Portuga. After 4weeks using aroma oils, the participants answered questions about the feeling of satisfaction with aroma oils. Results : Changes in the physiological indices. The mean deviation of skin pH was $5.58{\pm}0.47$ points before using aroma oils and $5.53{\pm}0.45$ points after 2 weeks, no statistical significance was found(p=0.221). MD was $5.36{\pm}0.41$ points after 4 weeks using aroma oils, which was statistically significant decrease of 0.22 points(p=0.001) Changes on the Pruritus Score Scale. A modified scale of the Pruritus Score Scale(Duo, 1987) was used to measure the severity, location, frequency, and the inconveniences of daily life due to prurius. The maximum scale of severity was 4 points, the full marks of location was 2 points, the full marks of frequency was 3 points, the full marks of inconveniences of daily life due to pruritus was 3 points. The scores ranged from 0 to 12, with 12 indicating the most severe pruritus. There was no statistical difference in severity and frequency score at 4 weeks later(severity p=0.097, frequency p=0.633). A statistically significant difference was found in the score of location and the inconveniences of daily life due to pruritus(each p=0.003). Conclusion : Generally speaking, the patient suffering from renal itch is the higher than normal in skin pH levels. that means to show alkaline condition of skin surface. In some case in this study, skin pH levels was rather lower than normal levels when measured actually patients suffering from renal itch by skin pH meter. But in this study post-test skin pH levels decreased, showing the contribution of aromathrapy to acidic condition of skin surface in suffering from renal itch. It seems to be some help to cure a pruritus and also have no ill effects on aroma oils.

• 한국재료학회지
• /
• 제23권12호
• /
• pp.714-721
• /
• 2013

A stoichiometric mixture of evaporating materials for $ZnAl_2Se_4$ single-crystal thin films was prepared in a horizontal electric furnace. These $ZnAl_2Se_4$ polycrystals had a defect chalcopyrite structure, and its lattice constants were $a_0=5.5563{\AA}$ and $c_0=10.8897{\AA}$.To obtain a single-crystal thin film, mixed $ZnAl_2Se_4$ crystal was deposited on the thoroughly etched semi-insulating GaAs(100) substrate by a hot wall epitaxy (HWE) system. The source and the substrate temperatures were $620^{\circ}C$ and $400^{\circ}C$, respectively. The crystalline structure of the single-crystal thin film was investigated by using a double crystal X-ray rocking curve and X-ray diffraction ${\omega}-2{\theta}$ scans. The carrier density and mobility of the $ZnAl_2Se_4$ single-crystal thin film were $8.23{\times}10^{16}cm^{-3}$ and $287m^2/vs$ at 293 K, respectively. To identify the band gap energy, the optical absorption spectra of the $ZnAl_2Se_4$ single-crystal thin film was investigated in the temperature region of 10-293 K. The temperature dependence of the direct optical energy gap is well presented by Varshni's relation: $E_g(T)=E_g(0)-({\alpha}T^2/T+{\beta})$. The constants of Varshni's equation had the values of $E_g(0)=3.5269eV$, ${\alpha}=2.03{\times}10^{-3}eV/K$ and ${\beta}=501.9K$ for the $ZnAl_2Se_4$ single-crystal thin film. The crystal field and the spin-orbit splitting energies for the valence band of the $ZnAl_2Se_4$ were estimated to be 109.5 meV and 124.6 meV, respectively, by means of the photocurrent spectra and the Hopfield quasicubic model. These results indicate that splitting of the ${\Delta}so$ definitely exists in the ${\Gamma}_5$ states of the valence band of the $ZnAl_2Se_4/GaAs$ epilayer. The three photocurrent peaks observed at 10 K are ascribed to the $A_1$-, $B_1$-exciton for n = 1 and $C_{21}$-exciton peaks for n = 21.

• 센서학회지
• /
• 제23권2호
• /
• pp.134-141
• /
• 2014

A stoichiometric mixture of evaporating materials for $BaIn_2Se_4$ epilayers was prepared from horizontal electric furnace. To obtain the single crystal thin films, $BaIn_2Se_4$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperatures were $620^{\circ}C$ and $400^{\circ}C$, respectively. The crystalline structure of the epilayers was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $BaIn_2Se_4$ epilayers measured from Hall effect by van der Pauw method are $8.94{\times}10^{17}cm^{-3}$ and 343 $cm^2/vs$ at 293 K, respectively. The temperature dependence of the energy band gap of the $BaIn_2Se_4$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)$=2.6261 eV-$(4.9825{\times}10^{-3}eV/K)T^2/(T+558 K)$. The crystal field and the spin-orbit splitting energies for the valence band of the $BaIn_2Se_4$ have been estimated to be 116 meV and 175.9 meV, respectively, by means of the photocurrent spectra and the Hopfield quasicubic model. These results indicate that the splitting of the ${\Delta}so$ definitely exists in the ${\Gamma}_5$ states of the valence band of the $BaIn_2Se_4/GaAs$ epilayer. The three photocurrent peaks observed at 10 K are ascribed to the $A_1-$, $B_1$-exciton for n = 1 and $C_{21}$-exciton peaks for n=21.

• Restorative Dentistry and Endodontics
• /
• 제28권4호
• /
• pp.334-340
• /
• 2003

This study was performed to evaluate the actual temperature rise on the surface of Buchanan plugger using thermocouple. The heat carrier system 'System B Heatsource'(Model 1005, Analytic Technologies, Redmond, WA, USA) and the Buchanan pluggers of F, FM, M and ML sizes are used for this study. The temperature was set to 200^{\circ}C on digital display and the power level on it was set to 10. Five thermocouples were placed in direct contact with the surface of each size of Buchanan's pluggers at 1 mm increments from the tip to the 4 mm length of shank. The heat control spring was touched for 5 seconds. and the temperature rise on the surface of the pluggers were measured at 1 sec intervals for more than 5 seconds with an accuracy of 0.01 using Data Logger. The data were statistically analyzed by one-way ANOVA. The results were as follows. 1. The position at which the temperature peaked was approximately at 1~2 mm far from the tip of Buchanan plugger (p<0.01). 2. The peak temperature was $215.25{\pm}2.28^{\circ}C$ in F plugger. $185.94{\pm}2.19^{\circ}C$ in FM plugger, $169.51{\pm}9.12^{\circ}C$ in M plugger, and 160.79{\pm}1.27^{\circ}C in ML plugger and the peak temperature was highest in F plugger and followed by. in descending order. FM plugger. M plugger. ML plugger showed the lowest peak temperature (p<0.01). 3. The temperature on the plugger was decreased with the increase of touching time. This results suggest that the actual temperature on the surface of the pluggers does not correlate well with the temperature set on digital display. Heat concentrates around the tip. The larger plugger reveals lower temperature rise relatively.

• 정신신체의학
• /
• 제5권1호
• /
• pp.3-11
• /
• 1997

In becoming parents, the marital partners enter into a new developmental phase. The conception of the child is an act of mutual creativity during which the boundaries between the self and another were temporarily obliterated more completely than at any time since infancy. The infant is a physical fusion of the parents, and their personalities unite within the child. for many women, creativity as a mother becomes a central matter that provides meaning and balance to their lives. The husband usually has strong desires for an offspring and can be transformed by it. The child can profoundly affect one or both parents, and the influences are reciprocal-a child's needs or specific difficulties uncover a parent's inadequacy. following the child's development, each transition into a new developmental phase requires an adaptation by the parents, and one or another of these required adaptations may disturb a parent's equilibirium. And the personality changes, emotional difficulties, and regressions of a spouse that occur in response to some phase of parenthood can upset the marriage. Not only do children identify with parents, but parents also identify with their children. The parents take pleasure in child's joy and suffer with the child's pain more than in almost any other relationship. certain respects e parents lives again in the child. Through the process of identification the child can also provide one of the two parents with the opportunity to experience intimately the way in which a person of the opposite gender grows up. Parenthood also provides the opportunity to be loved, admired, and needed simply because one is a parent and, as such, a central and necessary object in the young child's life. The many potentialities for emotional satisfactions from parenthood manage to outweigh the tribulations and sacrifices that are required. The child also exerts an indirect effect through changing the parent's position in the society, for new sets of relationships are established as the parents are drawn to other couples with children of the same age, and for a new impetus toward economic and social mobility often possesses the parents. frequently the couple's relatedness to their own parents improves and grows firmer once again. Parenthood, the satisfactions it provides and the demands it makes, varies as life progresses : and changes with the parent's interests, needs, and age as well as with the children's maturation. There are phases in the child's life that the parents are reluctant to have pass, whereas they tolerate others largely through knowing that they will soon be over. The changing lives of the children provide many satisfactions that offset the tribulations, uncertainties, and regrets. The parents change. The young father, who was just starting on his carrier whom the first child was born, settles into a life pattern. He becomes secure with increasing achievement and interacts differently with the youngest child and provides a different model for him than for the oldest. The mother may have less time for a second or third child than for her first, but she may also be more assured in her handling of them. The birth of a baby when the parents art in their late thirties will find them Less capable of physical exertion with the child and less tolerant of annoyances, but they are less apt to be annoyed. Eventually the children min and leave home, but the couple do not cease to be parents.

• 한국항만경제학회지
• /
• 제27권2호
• /
• pp.313-331
• /
• 2011

동북아 항만의 Hub Port 경쟁이 더욱 치열해 지고 있고, 신항 개발이 가속화되면서 공급과잉상태를 초래하게 되어, 부산 북항과 신항이 상생하기에 충분한 물동량 확보가 어려운 시점에서 부산항만은 많은 어려움에 직면하고 있다. 또한 북항은 시설이 노후화되어 있고 초대형선박이 접안하기에 필요한 수심 16m을 확보할 수 없으며, 또한 북항 재개발의 진행과 정책부재로 물동량은 자연스럽게 신항으로의 이전이 가속화되고 있다. 따라서 부산 신항의 추가적인 선석 개장운영과 더불어 부산 북항과의 역할정립 및 연계 발전 방안 모색을 서둘러야 할 시점이다. 북항과 신항의 연계발전 전략은 다음과 같이 요약될 수 있다. 첫째, 북항-신항 연계발전을 위한 모델 정립이 필요하다. 따라서 신항은 16m의 수심과 최첨단시설을 보유하고 있으므로 극대형선(ULCC) 위주로 특화기능을 부여하고, 지속적인 개발과 첨단시설 유치로 세계적인 글로벌 항만으로 발전시켜 나가야 한다. 반면에 북항은 항만리모델링을 통해 피더선 중심의 동북아 중심 항만으로 새로운 기능을 수행하도록 해야하고, 대부분의 공간은 북항 재개발 개념에 포함시켜 시민 친수공간으로 기능을 재부여 하여야 한다. 둘째, 북항의 컨테이너 전용부두를 기능 전환하여 부산항만의 항만별 부두기능을 재배치함으로써 항만기능 집적화를 통한 시너지 창출을 기하여야 한다. 셋째, 북항의 기능이 살아있는 한 북항과 신항의 효율적 연계교통망 확충을 통해 환적화물 처리를 효율적으로 할 수 있도록 하여 부산항만을 동북아 환적중심항만으로 발전시켜 나가야 한다. 넷째, 신항과 부산진해경제자유구역을 연계발전시켜 자체 수요 물동량 창출형 항만배후물류단지를 개발하여야 한다. 다섯째, 물동량 창출을 위해 화주고객, 운송사, 복합운송주선업자 및 관련 기관간 SCM을 구축하여 상호 협력적인 Win-Win 관계를 유지하는 것이 중요하다.

• Journal of Positioning, Navigation, and Timing
• /
• 제6권3호
• /
• pp.125-133
• /
• 2017

Time comparison is necessary for the verification and synchronization of the clock. Two-way satellite time and frequency (TWSTFT) is a method for time comparison over long distances. This method includes errors such as atmospheric effects, satellite motion, and environmental conditions. Ionospheric delay is one of the significant time comparison error in case of the carrier-phase TWSTFT (TWCP). Global Ionosphere Map (GIM) from Center for Orbit Determination in Europe (CODE) is used to compare with Bernese. Thin shell model of the ionosphere is used for the calculation of the Ionosphere Pierce Point (IPP) between stations and a GEO satellite. Korea Research Institute of Standards and Science (KRISS) and Koganei (KGNI) stations are used, and the analysis is conducted at 29 January 2017. Vertical Total Electron Content (VTEC) which is generated by Bernese at the latitude and longitude of the receiver by processing a Receiver Independent Exchange (RINEX) observation file that is generated from the receiver has demonstrated adequacy by showing similar variation trends with the CODE GIM. Bernese also has showed the capability to produce high resolution IONosphere map EXchange (IONEX) data compared to the CODE GIM. At each station IPP, VTEC difference in two stations showed absolute maximum 3.3 and 2.3 Total Electron Content Unit (TECU) in Bernese and GIM, respectively. The ionospheric delay of the TWCP has showed maximum 5.69 and 2.54 ps from Bernese and CODE GIM, respectively. Bernese could correct up to 6.29 ps in ionospheric delay rather than using CODE GIM. The peak-to-peak value of the ionospheric delay for TWCP in Bernese is about 10 ps, and this has to be eliminated to get high precision TWCP results. The $10^{-16}$ level uncertainty of atomic clock corresponds to 10 ps for 1 day averaging time, so time synchronization performance needs less than 10 ps. Current time synchronization of a satellite and ground station is about 2 ns level, but the smaller required performance, like less than 1 ns, the better. In this perspective, since the ionospheric delay could exceed over 100 ps in a long baseline different from this short baseline case, the elimination of the ionospheric delay is thought to be important for more high precision time synchronization of a satellite and ground station. This paper showed detailed method how to eliminate ionospheric delay for TWCP, and a specific case is applied by using this technique. Anyone could apply this method to establish high precision TWCP capability, and it is possible to use other software such as GIPSYOASIS and GPSTk. This TWCP could be applied in the high precision atomic clocks and used in the ground stations of the future domestic satellite navigation system.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권5호
• /
• pp.405-418
• /
• 2007

Mesenchymal stem cells(MSCs) have been though to be multipotent cells that can replicate that have the potential to differentiate into lineages of mesenchymal tissue including the bone, cartilage, fat, tendon, muscle, and marrow stroma. Especially, scaffolds to support cell-based tissue engineering are critical determinants of clinical efforts to regenerate and repair the body. Selection of a matrix carrier imvolves consideration of the matrix's role as a scaffold for physical support and host tissue integration as well as its ability to support of synergize the osteoinductive program of the implanted mesenchymal stem cell. The aim of this study is to evaluate the effect of autobone and Bio-$Oss^{(R)}$ to adherent mesenchymal stem cells as scaffolds on sinus augmentation with fibrin glue mixture in a rabbit model. 16 New Zealand White rabbits were divided randomly into 4 groups based on their time of sacrifice(1, 2, 4 and 8 weeks). First, mesenchymal stem cells were isolated from iliac crest marrow of rabbits and expanded in vitro. Cell culture was performed in accordance with the technique described by Tsutsumi et al. In the present study, the animals were sacrificed at 1, 2, 4 and 8 weeks after transplantation, and the bone formation ability of each sides was evaluated clinically, radiologically, histologically and histomorphologically. According to the histological observations, autobone scaffolds group showed integrated graft bone with host bone from sinus wall. At 2 and 4 weeks, it showed active newly formed bone and neovascularization. At 8 weeks, lamellae bone was observed in sinus graft material area. Radiologically, autobone with stem cell showed more radiopaque than Bio-$Oss^{(R)}$ scaffolds group. there were significant differences in bone volume between 4 and 8 weeks(p<0.05).