• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1401-1403
• /
• 2005

We present that the carrier balance can be improved by doping a hole transport layer of 4,4'- bis[N-(1-napthyl)-N-phenyl-amino]-biphenyl (${\alpha}$-NPD) with a hole blocking material of 2,9-dimethyl- 4,7-diphenyl-1,10-phenanthroline (BCP). The doping leads to disturb hole transport, which can enhance the balance of electron s and holes concentration in the emitting layer, aluminum tris(8 -hydroxyquinoline) (Alq3), resulting in enhanced electroluminescence (EL) quantum efficiency for the device with the doped ${\alpha}$-NPD.

• 대한조선학회논문집
• /
• 제45권4호
• /
• pp.361-369
• /
• 2008

The optimized distance between skegs and angle of the skeg for a standard twin-skeg type LNG carrier were presented using the CFD and model tests. The evaluation method of self-propulsion performance was derived based on the results of CFD and confirmed the validity through model tests. The analyses to assess self-propulsion performance using CFD were shown by flow line patterns on the skeg surface, nominal wake distribution in the propeller plane and the evaluation for flow balance around stern skegs. The optimized ship that was applied to the optimized two design parameters in stern skeg arrangement for target ship was derived in this work. Finally speed performance of mother ship which is existing ship and optimized ship were compared through CFD and model tests. And the usefulness about the evaluation method of self-propulsion performance was reconfirmed.

• Journal of Power Electronics
• /
• 제12권5호
• /
• pp.739-747
• /
• 2012

This paper applies carrier phase shifted pulse-width modulation (CPS-PWM) to transformerless modular multilevel converters (MMC) to improve the output spectrum. Because the MMC topology is characterized by the double-star connection of six legs consisting of cascaded modular chopper cells with floating capacitors, the balance control of the DC-link capacitor voltage is essential for safe operation. This paper presents a leg-balancing control strategy to achieve DC-link voltage balance under all operating conditions. This strategy based on circulating current decoupling control focused on DC-link balancing between the upper and lower legs in each phase pair by considering the six legs as three independent phase-pairs. Experiments are implemented on a 100-V 3-kVA downscaled prototype. The experimental results show that the proposed leg-balancing control is both effective and practical.

• 전력전자학회논문지
• /
• 제24권2호
• /
• pp.120-126
• /
• 2019

This study proposes a neutral voltage balance control scheme for stable fault-tolerant operation of an active neutral point clamped (ANPC) inverter using carrier-based pulse width modulation. The proposed scheme maintains the neutral voltage balance by reconfiguring the switching combination and modulating the reference output voltage in order to solve the degradation of the output characteristic in the fault tolerant operation due to the fault of the power semiconductor switch constituting the ANPC inverter. The feasibility of the proposed control scheme is confirmed by HIL experiment using RT-BOX.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.431-434
• /
• 2008

The physical OLED analog behavioral model for SPICE simulation has been described using Verilog-A language. The model is based on the carrier-balance between the hole and electron injected through Schottky barrier at anode and cathode. The accuracy of this model was examined by comparing with the results from device simulation.

• Nuclear Engineering and Technology
• /
• 제29권6호
• /
• pp.451-458
• /
• 1997

Signal shapes from a closed-ended coaxial HPGe detector are investigated by numerical methods. The detector used in this study has a volume of 72 ㎤ with relative efficiency of 15%. The electric field and potential distributions in the detector are determined by solving the Poisson equation at the depletion and operating bias. Hence the time dependent signal shapes induced on the electrode are obtained from the energy balance consideration and tv solving the equation of motion for the charge carriers. For various initial positions of a charge carrier pair, the collection times of induced charge vary in the range of 70 - 404 nsec.

• 전력전자학회논문지
• /
• 제8권6호
• /
• pp.469-477
• /
• 2003

본 논문은 플라잉 커패시터 멀티-레벨 인버터의 가장 큰 문제점인 플라잉 커패시터 전압 불균형의 새로운 해결방법으로 캐리어 로테이션(Carrier-Rotation) PWM 기법을 제안한다. 제안된 기법은 모든 스위치가 한번의 스위칭동작을 하는 동안 플라잉 커패시터의 충전과 방전에 관계된 레그 전압 리던던시(redundancy)를 같은 비율로 사용하여 플라잉 커패시터 전압을 일정하게 유지하며, 전압의 변동폭이 최소가 되도록 제어한다 이 방법은 각 캐리어의 배치가 모두 통상이므로 출력 전압의 고조파 성분이 저감되며, 또한 모든 스위치의 스위칭 주파수가 같으므로 스위치 이용률이 개선되는 특성을 갖는다. 제안된 기법을 플라잉 커패시터 3-레벨 인버터에 적용하여 상세히 분석하고, 3-레벨 이상에 적용할 수 있도록 일반화한다. 제안된 기법의 타당성은 실험 결과로 검증된다.

• 폴리머
• /
• 제28권5호
• /
• pp.367-373
• /
• 2004

발광체로 페릴렌기와 전자 전달체로 트리아진기를 측쇄로 가지는 새로운 비공액계 청색 발광 공중 합체를 합성하였다. 제조한 공중합체는 클로로벤젠, THF 클로로포름, 벤젠과 같은 일반 유기 용매에 매우 잘 녹았다. 전도성 투명 전극 (ITO)/공중합체 /알루미늄으로 구성된 단층형 유기 발광 소자는 공중합체에서 트리아진의 함유량이 $30\%$일 때 캐리어 균형이 잘 맞았고 최고의 외부 양자 효율 ($0.003\%$)을 나타내었다. 특히 위에서 제작한 유기 발광 소자는 페릴렌 발광체에 상응하는 청색 발광 (479 nm)을 나타냈다. 구동 전압은 5V로 매우 낮았고, 색 좌표는 X 값이 0.16, Y 값이 0.17이었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.163.1-163.1
• /
• 2016

Lead halide perovskites CH3NH3PbX3 (X=Cl, Br, I) have received great interest in the past few years because of their excellent photoelectronic properties as well as their low-cost solution process. Their theoretical efficiency limit of the solar cell devices was predicted around 31% by a detailed balance model for the reason that exceptional light-harvesting and superior carrier transport properties. Additionally, these excellent properties contribute to the applications of optoelectronic devices such as LASERs, LEDs, and photodetectors. Since these devices are mainly using perovskite thin film, one of the most important factor to decide the efficiency of these applications is the quality of the film. Even though, optoelectrical devices are composed of polycrystalline thin film in general, not a single crystalline form which has longer carrier diffusion length and lower trap density. For these reasons, monodomain perovskite thin films have potential to elicit an optimized device efficiency. In this study, we analyzed the crystallography of the in-plane aligned perovskite thin film by X-ray diffraction (XRD) and selected area electron diffraction (SAED). Also the basic optic properties of perovskites were checked using scanning electron microscopy (SEM) and UV-Vis spectrum. From this work, the perovskite which is aligned in all directions both of out-of-plane and in-plane was fabricated and analyzed.

• Journal of Information Display
• /
• 제7권2호
• /
• pp.26-30
• /
• 2006

Insertion of a thin lithium fluoride (TLF) layer between an emitting layer (EML) and an electron transporting layer has resumed in the developement of a highly efficient and bright organic light-emitting diode (OLED). Comparing with the performance of the device as a function of position with the TLF layer in tris-(8-hydroxyquinoline) aluminum $(Alq_{3})$, we propose the optimal position for the TLF layer in the stacked structure. The fabricated OLED shows a luminance efficiency of more than 20 cd/A, a power efficiency of 12 Im/W (at 20 mA/$cm^{2}$), and a luminance of more than 22 000 cd/$m^{2}$ (at 100 mA/$cm^{2}$), respectively. We suggest that the enhanced performance of the OLED is probably attributed to the improvement of carrier balance to achieve a high level of recombination efficiency in an EML.