• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 춘계학술대회 논문집
• /
• pp.261-261
• /
• 2009

탄소나노튜브(CNT)는 우수한 기계적, 화학적, 전기적 특성 때문에 전자방출원, 가스저장매체, 약물전달시스템 그리고 전기화학적 소자 등의 응용으로 주목받고 있다 [1-3]. 이러한 응용을 위하여 플라즈마 이온조사법을 이용하여 열화학증기증착법(TCVD)으로 성장된 수직배향 탄소나노튜브(VCNT)의 구조변화를 도모하고, 그 메커니즘을 연구하였다.

• 한국전기전자재료학회논문지
• /
• 제26권4호
• /
• pp.325-329
• /
• 2013

Carbon nanotubes(CNT) have excellent electrical, chemical stability and mechanical properties. These can be used in a variety of fields. MWCNT are extremely sensitive for minute changes in the ambient gas, namely, their sensing properties varies greatly with the absorption of gas such as NOx and $H_2$. We investigate the electrical properties of CNTs and make a NOx gas sensor based on Multi-walled carbon nanotubes (MWCNT) materials. We obtained the NOx gas sensor of MWCNT based on P-type Si wafer that has the resistivity of $1.667{\times}10^{-1}[{\Omega}{\cdot}cm]$. We knew that the sensitivity of sensor decreased with increasing of NOx gas concentration. And the sensitivity of sensor shows the largest value at $20^{\circ}C$. The sensitivity of sensor decrease with increasing the temperature. Also absorption energy of NOx gas molecule on the MWCNT surface decreases with increasing concentration of NOx gas.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1244_1245
• /
• 2009

Coating of amorphous nitride thin layers, such as boron nitride (BN) and carbon nitride (CN), has been performed on carbon nanotubes (CNTs) for the purpose of enhancing their electron-emission performances because those nitride films have relatively low work functions and commonly exhibit negative electron affinity behavior. The CNTs were directly grown on metal-tip (tungsten, approximately 500 nm in diameter at the summit part) substrates by inductively coupled plasma-chemical vapor deposition (ICP-CVD). Sharpening of the tungsten tips were carried out by electrochemical etching. Morphologies and microstructures of BN and CN films were analyzed by field-emission scanning electron microscopy (FE-SEM), energy dispersive x-ray (EDX) spectroscopy, and Raman spectroscopy. The electron-emission properties (such as maximum emission currents and turn-on fields) of the BN-coated and CN-coated CNT-emitters were characterized in terms of the thickness of BN and CN layers.

• 폴리머
• /
• 제37권3호
• /
• pp.342-346
• /
• 2013

마이크론 크기의 입자를 분산하기에 적합하나 나노 크기의 입자를 분산하기에는 미흡한 이축압출기를 사용하여 카본나노튜브(CNT) 분산을 시도하였다. 카본나노튜브 분산성 향상을 위해 서로 다른 입자 형상을 가지는 무기 충전제를 부가하였다. 무기 충전제 첨가에 따른 점도 증가는 상대적으로 높은 전단력을 유도하여 응집된 카본나노튜브 입자의 분산을 도모하였다. 또한 충전제 입자들은 전단력이 미치지 않는 구역에서 일어나는 카본나노튜브의 재응집을 억제함으로써 분산 안정화에 기여하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.658-661
• /
• 2002

Chemical species during growth of carbon nanotubes (CNTs) in direct current-plasma enhanced chemical vapor deposition were studied in details using $C_3H_4-NH_3$ and $CO-NH_3$ mixtures through optical emission spectroscopy (OES). In the $C_3H_4-NH_3$ system, the relative intensities of CN (388.3 nm) and CH (431.4 nm) decreased and that of $C_2$ (436 nm) increased, leading to $sp^2$-graphization into the CNT structure, leading to improvement of field emission property of CNTs. In the $CO-NH_3$ system, the trend is completely reversed. Attributing to the atomic oxygen for helping the graphitization of carbon, CNTs could be grown under the flow rate of CO (180 sccm)-$NH_3$ (10 sccm). Through these results, we suggest the growth mechanism in our system.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.492-492
• /
• 2011

단일벽 탄소나노튜브(Single-Walled Carbon Nanotubes, SWCNTs)는 매우 우수한 전기적, 광전자적 특성을 가지고 있어 차세대 나노 전자소자 물질로 각광받고 있다. 특히, 이들의 전기적 특성은 직경과 카이랄리티(chirality)에 따라 금속성(metallic)과 반도체성(semiconducting)으로 구분된다. 각 특성에 따라 금속성은 투명전극, 반도체성은 전계효과 트랜지스터(CNT-FET)로 활용가능성이 높다. 하지만, 일반적으로 단일벽 탄소나노튜브는 이 두 가지의 특성이 혼재되어 합성되기 때문에, 그들의 선택적 분리는 나노튜브 기반 전자소자 응용을 위해 매우 중요한 과정 중 하나이다. 최근에는 반응 가스를 이용한 선택적 제거, 밀도차를 이용한 원심분리법(density gradient ultracentrifugation) 등 다양한 방법들이 보고된 바 있다. 본 연구는 대기 중에서 마이크로웨이브 조사하여 금속성 나노튜브만을 선택적으로 제거하였다. 마이크로웨이브 조사는 CVD 방법과 전기 방전법으로 성장된 단일벽 탄소나노튜브에 800W로 조사 시간을 변화하며 수행하였다. 실험 결과, 조사 시간이 증가할수록 두 종류의 나노튜브에서 반도체성 나노튜브는 남아있는 반면 금속성 나노튜브는 점차 제거되었다. 이러한 원인은 각 전기적 특성에 따른 유전상수 차이에 의하여 기인한 것이다. 전기적 특성과 결정성은 라만 분광법(Raman spectroscopy)을 통하여 분석하였으며, 직경 및 분산정도는 주사전자현미경(scanning electron microscope), 투과전자현미경(tunneling electron microscope)으로 관찰하였다.

• 한국전기전자재료학회논문지
• /
• 제21권2호
• /
• pp.162-172
• /
• 2008

We studied the effect of an Al underlayer on the growth of carbon nanotubes (CNTs) and their field emission characteristics, First of all, CNTs were grown on the Invar catalyst layers with different thickness of 1 to 10 nm, showing that the CNT length was saturated for the catalyst 5 nm or thicker. The CNTs grown on the 5-nm-thick catalyst were ${\sim}10{\mu}m$ long and ${\sim}30nm$ in diameter. Second, an Al underlayer was applied between the catalyst layer and the Ti diffusion barrier to reduce the diameters of CNTs for better field emission properties by forming spherical Al oxide particles on which smaller catalyst nanoparticles would occur. The optimal thickness of an Al underlayer underneath the 5-nm-thick catalyst was ${\sim}15nm$, producing the CNTs with the length of ${\sim}15{\mu}m$ and the diameter of ${\sim}15nm$. The field emission measurements, following the tape activation, showed that the thinner and longer CNTs gave rise to better field emission performance with the lower turn-on and threshold electric fields.

• 반도체디스플레이기술학회지
• /
• 제13권1호
• /
• pp.7-12
• /
• 2014

In this study, we investigate the effects of corona-discharge pre-treatment on the properties of carbon nanotubes (CNTs) which are used as flexible transparent electrodes. The CNTs are deposited on PET (polyethylene terephthalate) substrates using a spray coating method. Prior to the deposition of CNTs, the PET substrates are corona-treated by varying the feeding directions of the PET substrate and the numbers of treatments. The variations in the surface morphologies and roughnesses of the PET substrates due to corona-treatment are characterized via atomic force microscopy (AFM). Dynamic contact angles (DCAs) of the corona-treated PET substrates are measured and analyzed as functions of the treatment conditions. Also, the sheet resistances and visible-range transmittances of the CNTs deposited on PET substrates are measured before and after bending test. The experimental results obtained in this study provide strong evidences that the adhesive forces between CNTs and PET substrates can be substantially enhanced by corona-discharge pretreatment.

• 반도체디스플레이기술학회지
• /
• 제12권2호
• /
• pp.1-6
• /
• 2013

The effects of interlayer formation and thermal treatment on the field-emission properties of carbon nanotubes (CNTs) were investigated. The CNTs were prepared on tungsten (W) micro-tip substrates using the electrophoretic deposition (EPD) method. The interlayers, such as aluminum (Al) and hafnium (Hf) were coated on the W-tips prior to CNT deposition and after the deposition of CNTs all the species were thermally treated at $700^{\circ}C$ for 30 min. The field-emission properties of CNTs were significantly improved by thermal treatment. The threshold electric field for igniting the electron emission was decreased and the emission current was increased. The Raman spectroscopy results indicated that this was attributed mainly to the enhancement of CNTs by thermal treatment. Also, the CNTs deposited on the interlayers showed the remarkably improved results in the long-term emission stability, especially when they were thermally treated. The X-ray photoelectron spectroscopy (XPS) measurement confirmed that this was resulted from the formation of the additional cohesive forces between the CNTs and the underlying interlayers.

• Composites Research
• /
• 제23권3호
• /
• pp.7-12
• /
• 2010

탄소섬유 복합재료의 전기전도도와 기계적 강도를 높이기 위하여 음극 및 양극 전기영동법을 이용하여 탄소나노튜브(MWCNT)와 탄소나노섬유(CNF)를 탄소섬유직물에 부착하였다. 양극 전기영동에서는 MWCNT와 CNF의 탄소나노 입자들만이 탄소 섬유에 부착되었으나, 음극 전기영동에서는 MWCNT와 CNF 및 나노 크기의 구리 입자가 동시에 탄소섬유직물에 부착되었고 이에 따라 부착 밀도 및 복합재료 물성의 증대라는 시너지 효과를 거둘 수 있었다. 특히 나노 크기의 탄소나노입자 및 마이크로 크기의 탄소 섬유가 혼합된 멀티스케일 복합재료의 제조를 통해 두께 방향 전기전도도의 높은 향상을 얻었다. 또한 MWCNT와 CNF를 동시에 멀티스케일 복합재료에 적용하였을 경우, 각각을 적용한 경우보다 두께 방향 전기전도도가 높게 나타났다.