• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.11
• /
• pp.1074-1083
• /
• 2011

Noise of digital camera has been noticeable to its users. Particularly, noise of a barrel assembly module in zoom in/zoom out operation is recorded while taking a video. Reduction of barrel noise becomes crucial but there are not many studies on noise of digital camera due to its short history of use. In this study, experiment-based analyses are implemented to identify sources of noise and vibration because of complexity and compactness of the barrel system. Output noise is acquired in various operation conditions using synchronization for spectral analysis. Noise sources of a barrel assembly in zoom operating are first identified by the comparison with gear frequency analysis and then correlation analysis between noise and vibration is applied to confirm the generation path of noise. Analysis on noise transfer characteristic of zoom module is also carried out in order to identify the most contributing components. One of possible countermeasures of noise in zoom operating is investigated by an experimental approach.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.6
• /
• pp.626-631
• /
• 1997

This paper represents the design of a real-time image preprocessing system. The preprocessing system performs hardware-wise mask operations and thresholding operations at the speed of camera output single rate. The preprocessing system consists of the preprocessing board and the main processing board. The preprocessing board includes preprocessing unit that includes a $5\times5$ mask processor and LUT, and can perform mask and threshold operations in real-time. To achieve high-resolution image input data($20485\timesn$), the preprocessing board has a linescan camera interface. The main processing board includes the image processor unit and main processor unit. The image processor unit is equipped with TI's TMS320C32 DSP and can perform image processing algorithms at high speed. The main processor unit controls the operation of total system. The proposed system is faster than the conventional CPU based system.

• Journal of Sensor Science and Technology
• /
• v.29 no.3
• /
• pp.194-200
• /
• 2020

Human detection is an important aspect in many video-based sensing and monitoring systems. Studies have been actively conducted for the automatic detection of humans in camera images, and various methods have been proposed. However, there are still problems in terms of performance and computational cost. In this paper, we describe a method for efficient human detection in the field of view of a camera, which may be static or moving, through multiple processing steps. A detection line is designated at the position where a human appears first in a sensing area, and only the one-dimensional gray pixel values of the line are monitored. If any noticeable change occurs in the detection line, corner detection and optical flow computation are performed in the vicinity of the detection line to confirm the change. When significant changes are observed in the corner numbers and optical flow vectors, the final determination of human presence in the monitoring area is performed using the Histograms of Oriented Gradients method and a Support Vector Machine. The proposed method requires processing only specific small areas of two consecutive gray images. Furthermore, this method enables operation not only in a static condition with a fixed camera, but also in a dynamic condition such as an operation using a camera attached to a moving vehicle.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.596-601
• /
• 2008

In this paper, we propose a new scheme to generate region-of-interest (ROI) enhanced depth maps in the hybrid camera system, which is composed of a low-resolution depth camera and a high-resolution stereoscopic camera. The proposed method creates an ROI depth map for the left image by carrying out a three-dimensional (3-D) warping operation onto the depth information obtained from the depth camera. Then, we generate a background depth map for the left image by applying a stereo matching algorithm onto the left and right images captured by the stereoscopic camera. Finally, we merge the ROI map with the background one to create the final depth map. The proposed method provides higher quality depth information on ROI than the previous methods.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.182-184
• /
• 2005

An embedded system has been applied to many fields including households and industrial sites. The embedded system is implemented fur image tracking in security area. This system supports a fixed IP far the reliable server operation on TCP/IP networks. A real time video image on the is analyzed to detect a certain invader who jumped into the observed area. The digital camera is connected at the USB host port of the target board. The video images from the video camera is continuously analyzed and displayed at the Linux web-server. The moving vector of the invaders on the continuous image frames is calculated and then it sends the calculated pan/tilt movement. That used Block matching algorithm and edge detection algorithm for past speed. And the displacement vector is used at pan/tilt motor control through RS232 serial cable. The experiment result showed tracking performance by the moving part speed of 10 to 150 pixels/sec.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.811-814
• /
• 1993

The development of fuzzy pan/tilt controller for remote handling in hostile environment is presented in this paper. In remote handling, control of the camera system is somewhat tedious and time consuming. Operators should do the two tasks of manipulating teleoperator and camera pan/tilt at the same time. By automating pan/tilt control, we expect operators could concentrate only on remote operation. When operators control camera pan/tilt they use simple linguistic rules such as "If the position of end effector on TV monitor is at the edge of the screen, control pan/tilt to display the end effector near the center of the screen." Such a rule is similar to fuzzy logic, so we used fuzzy logic controller to control camera pan/tilt. pan/tilt.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.101-101
• /
• 2000

MSC(Multispectral Camera), which will be a unique payload on KOMPSAT-II, is designed to collect panchromatic and multi-spectral imagery with a ground sample distance of 1m and a swath width of 15km at 685km altitude in sun-synchronous orbit. The instrument is designed to have an orbit operation duty cycle of 20% over the mission life time of 3 years. MSC electronics consists of three main subsystems; PMU(Payload Management Unit), CEU(Camera Electronics Unit) and PDTS(Payload Data Transmission Subsystem). PMU performs all the interface between spacecraft and MSC, and manages all the other subsystems by sending commands to them and receiving telemetry from them with software protocol through RS-422 interface. CEU controls FPA(Focal Plane Assembly) which contains TDI(Timc Delay Integration) CCD(Charge Coupled Device) and its clock drivers. PMU provides a Master Clock to synchronize panchromatic and multispectral camera. PDTS performs compression, storage and encryption of image data and transmits them to the ground station through x-band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.8-13
• /
• 2017

Compare with other communication system based RF technology, Optical Camera Communication (OCC) has limitation on data rate due to the low frame rate of camera. The limitation on data rate can be solved with multiple-input and multiple-output (MIMO) technology; and it is the final target of all researches on OCC. The MIMO topology can be implemented easily without breaking out the architecture of image sensor. For image sensor classification, there are two architectures have been developed: rolling shutter and global shutter. The operation of two techniques is different so the performance is also different. In this paper we analyze and evaluate the performance of the MIMO architecture for OCC.

• Journal of Auto-vehicle Safety Association
• /
• v.12 no.4
• /
• pp.7-12
• /
• 2020

Recently, automobile industries have developed ADAS, smart cars, connected cars, automated driving systems, which use a variety of sensor systems - ultrasonics, cameras, lidars and radars - and communication systems. It is necessary to examine the electromagnetic immunity of vehicles equipped with the sensor systems due to the fact that the normal operation of those systems is very important to the safety of the vehicles. The electromagnetic immunity tests are carried out in an electromagnetic semi anechoic chamber, which is cut off from the outside. It is difficult to create test environments in which the camera sensor systems of vehicles work properly in the test chamber. In this study, test jigs were designed and tested and as a result they are shown to be effective to create test environments for electromagnetic immunity tests of vehicles equipped with camera sensors. We also proposed additional safety standards for immunity tests of vehicles with camera systems that currently do not exist.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.825-827
• /
• 2003

Multi-Spectral Camera(MSC) is a payload on the KOMPSAT-2 satellite to perform the earth remote sensing. The instrument images the earth using a push-broom motion with a swath width of 15 km and a ground sample distance (GSD) of 1 m over the entire field of view (FOV) at altitude 685 Km. The instrument is designed to have an on-orbit operation duty cycle of 20% over the mission lifetime of 3 years with the functions of programmable gain/ offset and on-board image data compression/storage. The MSC instrument has one(1) channel for panchromatic imaging and four(4) channel for multi-spectral imaging covering the spectral range from 450nm to 900nm using TDI CCD Focal Plane Array (FPA). In this paper, the architecture and function of MSC hardware including electrical interface and the operation concept which have been established based on the mission requirements are described. And the design and the preparation of MSC system operation are analyzed and discussed.