• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.04a
• /
• pp.99-105
• /
• 1993

The purpose of this fundamental study is to investigate the mechanism of high strength concrete using the high calcium sulfate cement from a point of view in cement hydration and micro structure. As a results, it was found that the internal pores of concrete are decreased by using the high calcium sulfate cement, because the hydrates of Ettringite which is densified in structure is much formed in early ages at steam curing. In addition to the ettringite needs the 32 times of free water formed mixing water for hydration. This effect are not only decreased the water to cement ratio and also increase to comp, strength of concrete. It was conclude that these above the two facts are the main mechanism of high strength concrete using high calcium sulfate cement.

• Journal of the Korea Furniture Society
• /
• v.19 no.1
• /
• pp.83-90
• /
• 2008

Gypsum-wood composites were made by introducing inorganic substances into wood using calcium chloride, first treating solution, and sodium sulfate, secondary treating solution, by double diffusion process under atmospheric pressure at room temperature. The process conducted as follows: water saturated specimens were soaked in calcium chloride solutions at several concentration. Then the specimens were soaked further in saturated sodium sulfate solution, and they were leached in flowing tap water for 24h. To attain sufficient weight percent gain (WPG) values, the suitable concentration of calcium chloride and soaking time in saturated sodium sulfate solution were 20% and 48h, respectively. Inorganic substances were produced mainly in the lumina of tracheides. It was made sure that these substances were dihydrate gypsum($CaSO_4$ $2H_2O$) by X -ray microanalysis (SEM-EDX). The composites had good fire resistance due to low heat transfer rate of gypsum formed in wood. However, the composites had little decay resistances, because they showed high weight losses by test fungi attacks.

• Journal of Periodontal and Implant Science
• /
• v.32 no.2
• /
• pp.429-455
• /
• 2002

There are numerous kind of materials and techniques to regenerate the periodontal tissue which has been lost due to destructive periodontal disease, including bone graft material. Many bone graft materials have been reported and among these materials, synthetic material has been developed fin the long time because of its sufficient supply economically. Calcium sulfate which was evaluated as including much calcium, has been used in the clinical field. In the dental field calcium sulfate has been used as bone graft material and Kim reported that improved bone formation and more amount of new attachment after grafting calcium sulfate. but, because calcium sulfate has the problem that it generates the heat in setting period and resolves fast, we need to evaluate the effect of the improved calcium sulfate on periodontal tissue. The present study evaluates the effect of paste type calcium sulfate on the epithelial migration, alveolar bone regeneration, cementum formation and gingival connective tissue attachment in intrabony defect in dogs. Four millimeter deep and four millimeter wide 3-wall defects were surgically created in the mesial or distal aspects of premolars or molars. the test group received paste-type calcium sulfate with a flap procedure and the control group underwent flap procedure only. Histologic analysis after 8 weeks of healing revealed the following results : 1. The length of epithelial growth(the distance from CEJ to the apical end of JE) was 0.52${\pm}$0.26mm in the control and 0.56${\pm}$0.25mm in the test group. there was no statistically significant difference between the two groups. 2. The length of connective tissue adhesion was 1.74${\pm}$1.06mm in the control and 1.28${\pm}$0.57mm in the test group. there was no statistically significant difference between the two groups. 3. The length of new bone was 2.01${\pm}$0.95mm in the control and 2.62${\pm}$0.81mm in the test group. there was no statistically significant difference between the two groups. 4. The length of new cementum was 1.86${\pm}$0.80mm in the control and 2.77${\pm}$ 0.86mm in the test group. there was a statistically significant difference between the two groups.(P<0.01) These results suggest that the use of paste type calcium sulfate in 3-wall intrabony defects has significant effect on new cementum formation , but doesn't have any significant effect on the prevention of junctional epithelium migration and new bone formation. Finally, the paste type calcium sulfate that is used in this study is suggested to be the material that can have a significant effect on the periodontal healing, if its biocompatibility is improved.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.72-79
• /
• 2019

Concrete is vulnerable to cracks due to volume changes caused by temperature changes, shrinkage during curing, external forces, or poor construction. In particular, concrete placed in electric power tunnel structures can generate cracks by a variety of factors. As a result, these tunnel structures require continuous maintenance. In this study, we investigated the mechanical properties of electric power tunnel concrete using alpha-calcium sulfate hemihydrate, which is an industrial byproduct that has excellent expansion performance. To compensate for the decrease in compressive strength when substituting alpha-calcium sulfate hemihydrate, based on previous research, we added 9% alpha-calcium sulfate hemihydrate and adjusted the amount of admixture while using the same amount of cement. We then evaluated the mechanical properties of the concrete. The results showed that the compressive strength of the concrete was higher than that of ordinary Portland cement (OPC), and the shrinkage of concrete was reduced by more than 30% compared to that of OPC. Therefore, adding 9% of alpha-calcium sulfate hemihydrate is expected to have a significant effect in reducing concrete cracks.

• Journal of Veterinary Clinics
• /
• v.19 no.2
• /
• pp.165-173
• /
• 2002

The purpose of this study was to evaluate the effect of chitosan-calcium sulfate mixture on early bony consolidation in osteodistracted dogs. The experimental group was divided into 3 groups: saline group(Control), chitosan group(Group CH) and chitosan-calcium sulfate mixture group(Group CH+CS). Four dogs were allocated to each group and classified into B week observation subgroups and 5 week observation subgroups, respectively. Two dogs were allocated to each subgroup. The lateral surface of the left mandibular body was exposed in the subperiosteal plane and vertical osteotomy was carried out on the mandibular body. An external distraction device was applied to the mandibular body. Mandibular distraction was started 5 days after the osteotomy at a rate of 1 m per day for a total of 10 w distraction for 10 days. After completion of distraction, chitosan, chitosan-calcium sulfate and saline were injected into the distracted zone of the group CH, group CH+CS and control. The external device was left in place for 3 or 5 weeks to allow for bony consolidation. Serial radiographs were carried out every week. Two dogs of each group, six dogs in total, were sacrificed at 3 weeks, and the other six dogs at 5 week after distraction. Bone specimens of the distracted mandibles were taken for histologic examination. New bone was not noted in the distracted zone of 3 week observation subgroups in the control and group CH. However, new bone was developed in the group CH+CS with a narrow fibrous interzone in the area of the distracted zone. While osteogenesis was mild in the margin of the distracted Bone of 5 week observation subgroup in the control, new bone was noted much in the group CH and group CH+CS. However, osteogenesis was noted more significantly in the group CH+CS than that of group CH. In conclusion, chitosan-calcium sulfate mixture was more effective on early bony consolidation in distraction osteogenesis

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.45.1-45.1
• /
• 2009

In this study, we investigated a calcium phosphate-calcium sulfate injectable bone substitute (IBS) with organic reinforcement of chitosan, citric acid and hydroxypropyl-methyl-cellulose (HPMC). The powder component of IBS consisted of tetra calcium phosphate (TTCP), dicalcium phosphate dihydrate (DCPD) and calcium sulfate dihydrate (CSD). The liquid component was a solution of citric acid and chitosan. The effect of HPMC in terms of setting time, compressive strength and apatite forming ability on this IBS was investigated. The mass content of HPMC in liquid phase was varied in array of 0%, 2%, 3% and 4%. The setting times obtained between 20 and 45 minutes. Compressive strength was achieved over 20 MPa after incubation at 370C and in 100% humidity for 28 days. Porosities were evaluated in relation with compressive strength. Elastic moduli of the 28 days after-incubation IBS were obtained around 4GPa

• Journal of Veterinary Science
• /
• v.24 no.6
• /
• pp.74.1-74.15
• /
• 2023

Background: Antibiotic beads are used to treat local bacterial infections by delivering high drug concentrations to infected tissue. Objectives: This study examined the elution characteristics of metronidazole from metronidazole-calcium sulfate (MCa) and metronidazole-calcium-potassium sulfate (MCaK) beads over 20 days and the antibacterial efficacy of the beads after storage. Methods: The MCa and MCaK beads were prepared by mixing 250 mg of metronidazole and 10 g of calcium sulfate hemihydrate with water and a 3% potassium sulfate solution, respectively. The beads were placed in phosphate-buffered saline for the elution study. The metronidazole eluents were determined using high-performance liquid chromatography. The microstructures were examined by scanning electron microscopy (SEM), and the antimicrobial activity was evaluated by a microbioassay. Results: For the 20-day study, the total amount of metronidazole released was greater in the MCa beads than in the MCaK beads by 6.61 ± 0.48 mg (89.11% ± 3.04%) and 4.65 ± 0.36 mg (73.11% ± 4.38%), respectively. The amounts of eluted drugs from the MCa and MCaK beads were higher than the minimum inhibitory concentration at 0.5 ㎍/mL against anaerobic bacteria at both 20 days and 14 days. SEM showed that calcium crystals on the outer surface had dissolved after elution, and thinner calcium crystals were prominent in the MCaK beads. The MCa and MCaK beads exhibited antibacterial activity after setting, followed by storage at room temperature or 4℃ for 21 days. Conclusions: The MCa beads could release more drug than the MCaK beads, but all eluted metronidazole amounts were effective in controlling bacterial infections. Both metronidazole beads could be stored at ambient temperature or in a refrigerator.

• Journal of environmental and Sanitary engineering
• /
• v.17 no.3
• /
• pp.89-98
• /
• 2002

The changes of conventional clarification process and an increase in treatment cost are required to meet increasingly stringent regulations related to the treated water quality. Although many enhanced coagulations have introduced to improve organic matter removal, the results to remove color, nitrogen and phosphorus as well as organic material have not been very efficient yet. The removal of waste matters such as SS, organic matter, color and turbidity contained in dyeing wastewater was carried out by using the combination of calcium hydroxide and magnesium sulfate. The flocculation was investigated as a function of coagulant dose, pH, mixing time, settling time and coagulant addition modes such as the sequential addition of the two coagulants and the simultaneous addition of them. The flocculation by the combination of calcium hydroxide and magnesium sulfate was compared with that by aluminum sulfate. The mechanism of flocculation was investigated as well. About 84% of color in dyeing watewater was removed by flocculation with combination of calcium hydroxide and magnesium sulfate.

• Applied Biological Chemistry
• /
• v.37 no.5
• /
• pp.370-378
• /
• 1994

Soybean curd added with 40% of cow’s milk was prepared with eight coagulants such as calcium acetate, calcium lactate, calcium chloride, calcium sulfate, magnesium chloride, glucono-delta lactone (GDL), acetic acid and lactic acid. The curd products were evaluated by the chemical composition, coprecipitation porperties, mineral content, yield, color and textural characteristics. The lowest concentrations for protein coprepitation were 0.3% (v/v) for calcium salts, 0.4% (v/v) for magnesium chloride, 0.2% (v/v) for organic acids. Turbidity and crude protein of whey were markedly decreased at these concentrations. The optimal concentrations of coagualnts used for soybean curd preperation were 1.2% (v/v) for calcium acetate, calcium sulfate and calcium lactate, 1.0% (v/v) for calcium chloride and GDL, 0.8% (v/v) for magnesium chloride and lactic acid, 0.6% (v/v) for acetic acid. It was observed that of the eight coagulants tested, calcium chloride provided a satisfactory curd in quality. Calcium content of soybean curds by the calcium salt coagulants was higher than that by organic acid coagulants. Through the examination on the textural properties by a texturemeter was found out that acetic acid treated soybean curd among the organic acids, calcium salts and magnesium chloride treated curds had very high hardness value. All the curd products prepared in this experiment had a pale yellow color as affected by the value of L (lightness), a (redness) and b (yellowness). Although the colorimetric readings showed that the soybean curds prepared with the organic acids had higher L value but lower a and b value in comparison to calcium salts and magnesium chloride treated curds.

• Journal of Periodontal and Implant Science
• /
• v.33 no.4
• /
• pp.693-703
• /
• 2003

The present study evaluated the effects of guided tissue regeneration using xenograft material(deproteinated bovine bone powder), with and without Calcium sulfate membrane in beagle dogs. Contralateral fenestration defects (6 ${\times}$ 4 mm) were created 4 mm apical to the buccal alveolar crest of maxillary premolar teeth in 5 beagle dogs. Deproteinated bovine bone powders were implanted into fenestration defect and one randomly covered Calcium sulfate membrane (experimental group). Calcium sulfate membrane was used to provide GTR. Tissue blocks including defects with soft tissues which were harvested following four & eight weeks healing interval, prepared for histo-phathologic analysis. The results of this study were as follows, 1. In control group, at 4 weeks after surgery, new bony trabecular contacted with interstitial tissue and osteocytes lie cell were arranged in new bony trabecule. Bony lamellation was not observed. 2. In control group , at 8 weeks after surgery, scar-like interstitial tissue was filled defect and bony trabecule form lamellation. New bony trabecular was contacted with interstitial tissue but defect was not filled yet. 3. In experimental group, at 4 weeks after surgery, new bony trabecular partially recovered around damaged bone. But new bony trabecule was observed as irregularity and lower density. 4. In experimental group, at 8 weeks after surgery, lamella bone trabecular developed around bone cavity and damaged tissue was replaced with dense interstitial tissue. In conclusion, new bone formation regenerated more in experimental than control groups and there was seen observe more regular bony trabecular in experimental than control groups at 4 weeks after surgery. In control group, at 8 weeks after surgery, the defects was filled with scar-like interstitial tissue but, in experimental group, the defects was connected with new bone. Therefore xenograft material had osteoconduction but could not fill the defects. We thought that the effective regeneration of periodontal tissue, could be achieved using GTR with Calcium sulfate membrane.