• FLOWER RESEARCH JOURNAL
• /
• v.16 no.4
• /
• pp.295-298
• /
• 2008

A new Cymbidium cultivar 'White Princess' was released by the National Horticultural Research Institute (NHRI) in 2005. A cross was made in 1995 between 'Cymbidium 2113', light purple colored petal and medium plant sized variety, and 'Lucky Rainbow Randevous', a dark purple petal with red lip and large type variety. The ninety progenies were obtained after planting and acclimatization in green house. In 2000, a line (9526747) was selected and multipliticed after test of its flower color, leaf shape, flower stalk, and vigorous growing habit. After evaluation trial for two growing seasons, the selected line was named as 'White Princess'. The 'White Princess' has white petals (WN 155A) with red lip (RP59D) color and large sized leaves, and flowers (leaf length is about 88 cm and flower diameter is about 8 cm) with semi-erect flower stalks. Blooming started from December to January in optimal culture conditions. High temperature (more than $30^{\circ}C$) and low light intensity(less than 10,000Lux) should be avoided for the appropriate growth.

• Journal of the Korean Magnetics Society
• /
• v.8 no.6
• /
• pp.369-373
• /
• 1998

The exchange anisotropy between NiO antiferromagnetic layer and NiFe ferromagnetic layer has been investigated in NiFe(10 nm)/NiO(60 nm) formed by magnetron sputtering. The NiO films were sputtered from nickel oxide using R. F. poser and NiFe, Ta were deposited using D. C. power under Ar atmosphere. Above all. we studied the exchange anisotropy of Ni-Fe/NiO bilayer, and focused especially on the effect of NiO depostion condition. Our experimental data showed that the dominant factor for determining the exchange anisotropy properties was the Ar pressure during NiO deposition. The better exchange anisotropy properties were found when the NiO film was deposited at low Ar pressure probably due to the flatten interface and the epitaxial tendency of NiO grains and NiFe grains. However, as Ar pressure increased, interfacial diffusion at NiFe/NiO interface and oxygen content of NiO film increase, and consequently reduced the exchange anisotropy. We concluded that the flatten interface and relatively low oxygen content of NiO layer are dominant factors for the enhancement of the exchange anisotropy in NiFe/NiO bilayer.

• Journal of the Korean Dietetic Association
• /
• v.27 no.4
• /
• pp.209-231
• /
• 2021

The purpose of this study was to compare differences between essential tasks and delegable tasks among public kindergarten dietitians. A survey study was conducted through a self-administered online method from November 18 to December 28, 2019. The survey consisted of essential tasks and delegable tasks, including 6 Duties, 25 Tasks, and 94 Task Elements. The survey was distributed to a sample of 500 kindergartens in Korea, after excluding incomplete surveys and outliers, and a total of 224 responses were used for the analysis. Descriptive statistics were used to compare essential tasks and delegable tasks. The results show that 'Duty A. Nutrition Management', 'Duty B. Foodservice Management Practices', 'Duty C. Hygiene management of kindergarten foodservice', 'Duty D. Nutrition-Diet Education and counseling', and 'Duty F. Professionalism Enhancement' were recognized as essential tasks to be performed by kindergarten dietitians. All 16 tasks elements (100.0%) in 'Duty E. Managing snacks during semesters, and lunch/snack during breaks' were identified as delegable tasks. In conclusion, most tasks were recognized as essential tasks to be performed by kindergarten dietitians. On the other hand, 'Duty E. Managing Snacks during semesters, and lunch/snack during breaks' was considered a delegable task by public-attached kindergarten dietitians. It is recommended that public-attached kindergartens should consider additional workforce related to 'Duty E'. This study is expected to offer basic data on laws and regulations about the duties of kindergarten dietitians.

• Journal of Engineering Education Research
• /
• v.24 no.1
• /
• pp.3-14
• /
• 2021

The purpose of this study is to analyze the characteristics of efficient problem-solving teams and inefficient problem-solving teams using SYMLOG. In this study, 35 college students majoring in engineering education at C university were organized into 7 teams and carried out technological problem solving projects over one semester. Based on the results of the team project, the top 2 teams were defined as efficient problem solving teams and the bottom 2 teams were defined as inefficient problem solving team, and analyzed the characteristics of the team using SYMLOG. The main results are as follows: First, an analysis of SYMLOG from efficient problem solving teams and inefficient problem solving teams showed that there was a difference between self-awareness and others' perception in terms of U(Upward)-D(Downward) dimension. Second, in the inefficient problem solving teams, there was a significant difference between self-awareness and others' in the F(Forward)-B(Backward) dimension. Third, there was no difference between self-awareness and others' in both efficient and inefficient teams at the P (Positive)-N(Negative) dimension. Fourth, an efficient problem-solving team had a clear leader, and there was a team member who supported the leader. On the other hand, the inefficient problem-solving team did not have a clear leader, or one person played the role of leader and there were no team members supporting the leader.

• Journal of Environmental Science International
• /
• v.30 no.3
• /
• pp.245-255
• /
• 2021

In this study, we evaluated the effect of the type of sewage sludge (digested, non digested) on drying efficiency according to the polymer injection rate. The drying characteristics were shown using a near-infrared ray (NIR) and a microwave. As a result of the drying characteristics with NIR at a polymer dose ratio of 8%, the heating up period is up to 6 minutes after the start of the drying experiment. Afterwards, the constant rate drying period of the digested sludge (A, C and G sites) was 6 minute → 18 minute, showing a rapid decrease in moisture. On the other hand, non digested sludge (B, D, E, F, H, I, J and K sites) showed gradual drying characteristics compared to digested sludge until complete drying (10%). As the polymer dose ratio of 10% and 12%, the heating up period for digested sludge is up to 6 minute after the start of the experiment. Afterwards, the constant rate drying period of the digested sludge was 6 minute → 20 minute, showing a rapid decrease in moisture. On the other hand, the heating up period of non digested sludge was up to 10 minute after the start of the experiment, and the constant rate drying period was 10 minute → 22 minute, which was shorter than digested sludge. As a result of the drying characteristics with microwave at a polymer dose ratio of 8%, 10% and 12%, the constant rate drying period the digested sludge was 4 minute → 20~22 minute, showing a rapid decrease in moisture. On the other hand, non digested sludge of the constant rate drying period was 4 minute → 22~30 minute, which was longer than digested sludge.

• Animal Bioscience
• /
• v.35 no.8
• /
• pp.1174-1183
• /
• 2022

Objective: This study was conducted to evaluate the effects of the provision of a protein-rich supplement on productive performance, and metabolic profile on grazing suckling female beef calves in tropical conditions during 150 d of experimentation. Methods: Fifty-six Nellore suckling female calves, and their respective dams were distributed in a completely randomised design and made to undergo two treatments as follows: UNS (without supplementation), and SUP (supplementation with 5 g/kg body weight [BW] of a protein supplement). Throughout the experiment, animal performance and metabolic profile were evaluated. Also, ureagenesis and gluconeogenesis were assessed for gene expression. Results: SUP female calves showed a higher voluntary intake (p≤0.03) of the diet components evaluated, digestibility of organic matter (p≤0.02) and microbial nitrogen production (MICN; p≤0.02) compared to UNS female calves. In its turn, serum urea nitrogen (p≤0.01) and insulin-like growth factor-1 (p≤0.03) levels and ureagenesis (p≤0.04) increased in SUP female calves compared to UNS female calves. Blood glucose and triglyceride levels were not affected by supplementation. The average daily gain (ADG) from SUP female calves was higher (p≤0.02) compared with UNS female calves. However, supplementation did not affect the body measures of the animals. Conclusion: In summary, provision of a protein-rich supplement improves the intake and nutrients digestibility, ADG and final BW and increases metabolic indicators of the protein status in grazing suckling female beef calves in tropical conditions.

• Korean Journal of Materials Research
• /
• v.32 no.9
• /
• pp.379-383
• /
• 2022

In this study, Barium Germanium glasses were prepared with a composition of xBaO-(72-x)GeO₂-8La₂O₃-20ZnO where x = 16.0, 18.0, 20.0, 22.0 and 24.0 mol% respectively. Their physical and optical properties, such as refractiveness index, glass transition temperature (T_g), softening temperature (T_s), transmittance and Knoop hardness were studied. The results showed that refractive index, T_g, T_s and coefficient of thermal expansion (CTE) increased with increasing BaO concentration. The refractive index of all the prepared samples was observed between 1.7811 to 1.7881. The Abbe number was calculated by formula using n_d (589.3 nm), n_f (656.3 nm) and n_c (486.1 nm) and observed to be between 38 to 40. The Abbe number of the prepared sample was similar to that of BaO and GeO₂. The transmittance of the prepared glasses was observed to be between 80 ~ 82 % throughout the range from 200 nm to 800 nm. Knoop hardness divided into seven steps were measured 5 class (≥ 450 ~ < 550) of all prepared samples.

• Journal of Korea Foundry Society
• /
• v.42 no.4
• /
• pp.218-225
• /
• 2022

For hydrogen-vehicle applications (air pressure control valve housing, APCVH), an investigation was conducted to determine how micro-defects in a high- pressure die-casted Al alloy (industrial code: ALDC12) could be controlled by means of a post-treatment using an organic-based impregnation solution in order to improve the air- tightness of the die-casted Al sample. Two different impregnation solutions were proposed and its test results were compared to a imported product from Japan with respect to the processing variables used. A structural investigation of the components under study was conducted by means of computer tomography and 3D X-ray micro-CT. These observations revealed that the use of the impregnation treatment to seal micro-defects led to highly significant and beneficial changes which were attributed mainly to interconnections among inherent micro-pores. A leak test after impregnation revealed that the performance improvement rate of the die-casted Al sample was ~70% for INNO-01. Therefore, the developed impregnation solutions offer an effective strategy to control the micro-defects found in various vehicle parts via die-casting.

• Geomechanics and Engineering
• /
• v.29 no.2
• /
• pp.113-131
• /
• 2022

A rockburst is a common disaster in deep-tunnel excavation engineering, especially for high-geostress areas. An anomalously low friction effect is one of the most important inducements of rockbursts. To elucidate the correlation between an anomalously low friction effect and a rockburst, we establish a two-dimensional prediction model that considers the discontinuous structure of a rock mass. The degree of freedom of the rotation angle is introduced, thus the motion equations of the blocks under the influence of a transient disturbing force are acquired according to the interactions of the blocks. Based on the two-dimensional discontinuous block model of deep rock mass, a rockburst prediction model is established, and the initiation process of ultra-low friction rockburst is analyzed. In addition, the intensity of a rockburst, including the location, depth, area, and velocity of ejection fragments, can be determined quantitatively using the proposed prediction model. Then, through a specific example, the effects of geomechanical parameters such as the different principal stress ratios, the material properties, a dip of principal stress on the occurrence form and range of rockburst are analyzed. The results indicate that under dynamic disturbance, stress variation on the structural surface in a deep rock mass may directly give rise to a rockburst. The formation of rockburst is characterized by three stages: the appearance of cracks that result from the tension or compression failure of the deformation block, the transformation of strain energy of rock blocks to kinetic energy, and the ejection of some of the free blocks from the surrounding rock mass. Finally, the two-dimensional rockburst prediction model is applied to the construction drainage tunnel project of Jinping II hydropower station. Through the comparison with the field measured rockburst data and UDEC simulation results, it shows that the model in this paper is in good agreement with the actual working conditions, which verifies the accuracy of the model in this paper.

• Human Ecology Research
• /
• v.60 no.1
• /
• pp.115-130
• /
• 2022

This study aimed to understand what factors the mothers of infants consider to be important when choosing screen media programs for their children, and to investigate whether those features differ according to maternal socio-demographic characteristics (i.e., age, education level, employment status, and family income). The study participants comprised 948 mothers who were the primary caregivers and had at least one child aged 4-6. They were asked to select three of the following aspects as critical criteria for determining if a given screen media program is appropriate for infants: (a) contents suitable to the child's developmental level, (b) behaviors of characters, (c) appearance of characters, (d) visual aspects of program, (e) duration of screen media program, (f) whether the screen media program includes instructive contents, and (g) whether the program leads to opportunities for conversations among family members and activities with children. Multiple response frequency analysis and multiple response cross-analysis were used to analyze the mothers' responses. The results revealed that the majority of the mothers reported that 'contents suitable to the child's developmental level' represented the first-ranked criterion for selecting screen media programs for their child, which was followed by 'behaviors of characters,' and 'whether the screen media program includes instructive contents.' However, such criteria for screen media programs for infants differed according to maternal age, education level, employment status, and family income. These outcomes suggest that different information needs to be provided based on maternal characteristics in order to help mothers determine the quality of screen media programs for their infants.