• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.5
• /
• pp.405-411
• /
• 2012

Inside a rotorcraft fuel cell, pipes and components are located for fuel storage and fuel supply into the engine. Utility helicopters, operated in battle fields, fly at lower altitude compared to fixed-wing aircraft and hence are more likely to be exposed to gunfire. Since internal pressure of fluid increases when hit, the effect on LRU due to increase in pressure must taken into account when designing the aircraft for survivability. However, it is costly and time consuming to manufacture a fuel cell for gunfire test, and due to constraints from usage of live ammunition, related data gathered through numerical simulation is needed. In this study, numerical simulation on rotorcraft fuel cell exposed to gunfire was carried out using Autodyn to analyze bullet movement inside the fuel cell after hit, and internal pressure of fluid and equivalent stress on fuel cell assessed.

• Journal of Life Science
• /
• v.24 no.8
• /
• pp.903-909
• /
• 2014

Plants are an invaluable source of potential new anti-cancer drugs. Sasa quelpaertensis Nakai (Korean name, Jeju-Joritdae) is one of these plants with medical value, which is a bamboo grass widely distributed in Mt. Halla on Jeju Island, Korea. Here, we investigated the apoptotic effects of S. quelpaertensis leaf extracts in six human cancer cell lines (A549, MCF-7, HepG-2, Hela, HCT116 and A375). MTT assay signified the antiproliferative nature of S. quelpaertensis extracts against all tested cancer cells: S. quelpaertensis displayed slight cytotoxicity against A549, MCF-7 and HepG-2 cells, whereas it was exclusively cytotoxic to Hela, HCT116 and A375 cells. Apoptotic cells were evaluated using PI staining of DNA fragmentation by flow cytometry (sub-G1 peak). PI staining indicated increasing accumulation of Hela, HCT116 and A375 cells at sub-G1 phase. Further events like generation of nitric oxide ($NO^{\bullet}$) were accompanied in the S. quelpaertensis Nakai-induced apoptosis. Augmented $NO^{\bullet}$ generation resulted in the DNA fragmentation of Hela, HCT116 and A375 cells by treatment with S. quelpaertensis leaf extracts. These results suggest that S. quelpaertensis may be a potential natural resource for treating cancer cell. To identify the exact mechanisms of molecular mechanism of S. quelpaertensis induced apoptosis awaits further investigation.

• Atmosphere
• /
• v.26 no.1
• /
• pp.73-84
• /
• 2016

A method to make ice spike using home refrigerator with ice tray was found. Many experiments have carried out with this method and many natural phenomena occurring on the formation of ice spike are found. A new concept of the Latter Freezing Water (LFW) was imported to explain the ice spike formation. At LFW position on water surface, the Sprout of Super cooled Water (SSW) grows by the Volume Expansion Effect (VEE) caused by the phase change of water in water. And air bubbles that are expelled from ice during freezing process, gather, rise, and detonate at the upper most part of SSW that make SSW freeze and grow upward with the water pipe in it. Together with VEE the capillarity in the water pipe makes the column grow more, that makes the ice spike. Many other findings were succeeded; 1) Ice spike process is completed before the whole water freezes. 2) If water is corrupted or shocked, even though it is very slight, ice spike is not generated. 3) Rain water contains the most LFW among all kind of waters used in experiments. 4) LFW is changed into normal water after passing the ice spike. 5) A new concept of the ice bullet is introduced. 6) The reason of frequent occurrences of the ice spike at Mt. Mai is investigated also.

• Journal of the Korea Society for Simulation
• /
• v.21 no.3
• /
• pp.11-16
• /
• 2012

Simulation is the imitation of the operation of a real-world process or system over time. It concerns the study of the operating characteristics of real systems. Typically, a simulation project consists of several steps such as data collection, coding, model verification, model validation, experimental design, output data analysis, and implementation. Among these steps of a simulation study this paper focus on statistical analysis methods of simulation output data. Specially, we explain how to develop confidence interval estimators for mean ${\mu}$ in terminating and non-terminating simulation cases. We, then, explore the estimation techniques for $f({\mu})$, where the function $f({\bullet})$ is a nonlinear that is continuously differentiable in a neighborhood of ${\mu}$ with $f'({\mu}){\neq}0$.

• The Journal of Dong Guk Oriental Medicine
• /
• v.5
• /
• pp.79-95
• /
• 1996

When we see normal gait, gait cycle is seperated as stance phase and swing phase. It needs 6 determinant of gait of pelvic rotation, pelvic tilt, knee joint of stance phase, ankle and foot motion, ankle and knee motion, and pelvic movement to be accomplished. In addition, a joint and muscle action is accomplished biomechanically at the same time with its gait cycle. In oriental medicine, the relationships between chang-fu physiology and meridian physiology are summaried as follows ; ${\bullet}$ chang-fu physiology : Spleen manages the extremities. Liver manages soft tissues. Liver stores blood. Kidney stores essences. Kidney manages bones. ${\bullet}$ meridian physiology : The Leg Greater Yang Meridian and meridian soft tissues The Leg Yang-Myeong Meridian and meridian soft tissues The Leg Lesser Yang Meridian and meridian soft tissues The Leg Greater Yin Meridian and meridian soft tissues The Leg Lesser Yin Meridian and meridian soft tissues The Leg Absolute Yin Meridian and meridian soft tissues Especially, we can find out relations between in a "blood supplied feet can walk well" that explains "blood regulations and by liver nourishing effects"that is the closest concept of muscle. Abnormal gaits are due to three causes as following; first, physical defect secoud, pain third, nervous system or instability of muscle. In oriental medicine, we can know relationship in "atrophy, numbness, stroke, convulsion, muscular dystrophy of knee, rheumatoid arthritis, five causes of infantile growing defects, five causes of softening, sprain". Especially, atrophy is the most important symptom. Gait evaluation should be emphasized where a point can walk 8 feet to 10 feet considering stride width, stride length, the body weight center, stride number, flexion, extension, rotation of a joint as a standard factor. The point is we should find out something strange in a patient's side, front and back view. After that we should find out its cause as an index that we can observe abnormal findings in a joint and muscle.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.1
• /
• pp.60-65
• /
• 2015

In this paper, we used the sound of gunshots recorded by multiple microphones to increase the accuracy of the calculation of the distance between sniper and the microphone array. This method is crucial for achieving military objectives. Gunshots are comprised of the explosion of driving gas from the muzzle and the supersonic shock wave from the flying bullet. The original distance calculation method compares the time difference of arrival and angle of incidence to estimate the sniper's location. The disadvantage of this method is that when the angles of incidence coincide the margin of error increases, to solve this problem we suggest a new method using the characteristic changes of the shock wave with the increase of perpendicular distance between the microphone and the trajectory of the bullet. This theory is verified by experiments.

• International Journal of Advanced Culture Technology
• /
• v.7 no.2
• /
• pp.168-178
• /
• 2019

In this paper I discuss a more complicated case of 'It'-Extraposition in English in the Optimality Theory [1] by further modifying and extending the analysis done in Khym (2018) [2] in which only the 'relatively' simple cases of 'It'-Extraposition such as 'CP-Predicate' was dealt with. I show in this paper that the constraints and the constraint hierarchy developed to explain the 'relatively' simple cases of 'It'-Extraposition are no longer valid for the more complicated cases of 'It'-Extraposition in configuration of 'CP-V-CP'. In doing so, I also discuss two important theoretic possibilities and suggest a new view to look at the 'It'-Extraposition: first, the long-bothering question of which syntactic approach between P&P (Chomsky 1985) [3] and MP (Chomsky 1992) [4] should be based on in projecting the full surface forms of candidates may boil down to just a simple issue of an intrinsic property of the Gen(erator). Second, the so-called 'It'- Extraposition phenomenon may not actually be a derived construction by the optional application of Extraposition operation. Rather, it could be just a representational construction produced by the simple application of 'It'-insertion after the structure projection with 'that-clause' at the post-verbal position. This observation may lead to elimination of one of the promising candidates of '$It_i{\ldots}[_{CP}that{\sim}]_i$' out of the computation table in Khym [2], and eventually to excluding the long-named 'It'-Extraposition case from Extrsposition phenomena itself. The final constraints and the constraint hierarchy that are explored are as follows: ${\bullet}$ Constraints: $^*SSF$, AHSubj, Subj., Min-D ${\bullet}$ Constraint Hierarchy: SSF<<>>Subj.>> AHSubj.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.6
• /
• pp.170-176
• /
• 2018

Recently, weapon system requires personal protection products due to the explosion of rapid-fire explosion, which is considered to be multi threat in modernization, complication and war against terrorism. However, the conventional Korean military bullet protection helmets are not suitable for wearing convenience and combatant interoperability in terms of ergonomic. In this paper, we propose a suitable 3D Scanning method for the head, and compare the measured 3D dimension with the existing 2D measurement value to identity the reliability. Reverse engineered soldier head using the quick surface method was realized with a perfect free-form surface and satisfactory tolerance range (${\pm}0.2mm$). Through the comparison of 3D and 2D measured head dimensions, the absolute error value was 0.73 mm on average and relative error was 0.35 %, confirming the high accuracy of the 3D scan modeling. Also, quick surface method using 3D scanner is suggested a fast and accurate skill for ergonomics in obtaining the head modeling needed for military's personal bullet protection helmet design.

• Journal of Industrial Convergence
• /
• v.21 no.7
• /
• pp.83-92
• /
• 2023

The bullet shape of the plasma jet using the atmospheric-pressure dielectric barrier discharge method changes depending on the applied fluid rate and the intensity of the electric field. This changes appear as a difference in spectral distribution due to a difference in density of the DBD plasma jet. It is an important factor in utilizing the plasma device that difference between the occurrence of active species and the intensity through the analysis of the spectrum of the generated plasma jet. In this paper, a plasma jet generator of the atmospheric pressure volume DBD method using Ar gas was make a prototype in accordance with the proposed design method. The characteristics jet fluid rate analysis of Ar gas was accomplished through simulation to determine the dependence of flow rate for the generation of plasma jets, and the characteristics of plasma jets using spectrometers were analyzed in the prototype system to generate optimal plasma jet bullet shapes through MFC flow control. Through the design method of the proposed system, the method of establishing the optimal plasma jet characteristics in the device and the results of active species on the EOS were verified.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.1
• /
• pp.80-99
• /
• 2018

In premodern society, the central spaces in local counties were known as Eupchi (邑治), in which Gwan-a (官衙). The Eupchi located in seaside counties were in Eupseong, whereas the Eupchi of inland counties only included a Gwan-a, and did not have a fortress. Yanggeun-gun (楊根郡) and Jipyeonghyeon (砥平縣), which currently form Yangpyeong-gun (楊平郡), were counties where only Gwan-a existed. At present, there are few traces of the Gwan-a in Yanggeun and Jipyeong. In addition, it is impossible to exactly verify the history, scale and location of these two Gwan-as. Therefore, this study attempts to make a rough estimation of the histories, scales and sites of these Gwan-a by analyzing the relevant literature and ancient maps that are scattered according to the principles of spatial organization of local Gwan-a. The Yanggeun and Jipyeong Gwan-a appear to have been built in the early Joseon period. There are three reasons for this assertion: First, in Yanggeun and Jipyeong, Suryeong (守令) were first officially appointed after the early Joseon period. Once Suryoeng were appointed to such counties, the Gwan-a in which they would serve could be established. Second, the Dongheon (東軒) in Yanggengun and the Gaeksa (客舍) in Jipyeonghyeon were rebuilt in 1703 (29th year of the reign of King Sukjong) and 1465 (11th year of the reign of King Sejo), respectively; thus; the Gwan-a must have existed since the early Joseon period.. Third, in Yanggeungun, the Hyanggyo (鄕校) had existed since the early Joseon period, as the Joseon government necessarily established the Hyanggyo in areas where Suryeong were established. The facilities of local Gwan-a in the Joseon period were largely divided into gonghae (公?), educational institutes, and alters. The gonghae was a facility in which the Suryeong and Gwanwon (官員) managed administrative, judicial and military affairs, and consisted of the A-sa (衙舍), Hyeongcheong (鄕廳), Jackcheong (作廳), Gaeksa (客舍), Gungwancheon (軍官廳), and so on. The education institute was called a Hyeonggyo, while alters included the Sajikdan (社稷壇), Seonghwansa (城隍祠) and Yeodan (?壇). Both the Yeongeun and Jipyeong Gwan-a also consisted of such facilities as A-sa, Hyangcheong, Jakcheong, Gaeksa, Gungwancheong, Hyeonggyo, Changgo, Sajikdan, Seonghwangsa, Yeodan, Saryeongcheong, Jiincheong and Gwannocheong. The present sites for both Gwan-as cannot be identified with any certitude. However, they can be roughly identified by connecting the related literatures, oral statements and relics with the principles of spatial organization of local Gwan-a in the Joseon period. ${\bullet}$ Address of the Yanggeun A-sa (Dongheon): the whole of # 15, Gwanmun 1-gil, Yangpyeong-eup (Yanggeun-ri 151) in front of Yanggeun Junior High School at present. ${\bullet}$ Address of Yanggeun Gaeksa: around the Yangpyeong police station at present. ${\bullet}$ Address of Jipyeong A-sa(Dongheon): the whole of Jipyeong-ri 248-250, Jipyeong-myeon at present. ${\bullet}$ Address of Jipyeong Gaeksa: the whole of Jipyeong-ri 238, Jipyeong-myeon at present.