• Korean Journal of Environmental Agriculture
• /
• v.26 no.3
• /
• pp.259-266
• /
• 2007

Enormous amount of zeolite by-products as a fine powder have been produced while manufacturing commercial zeolite products. Granulation of the zeolite by-products is necessary in order for them to be recycled as soil conditioners or absorbent for various environmental contaminants due to the limitations inherent from their physical properties. We granulated the zeolite powders using Portland cement as a cementing agent and characterized the physical and chemical properties of the granulated zeolite product. The experimental natural zeolite had a Si/Al ratio of 4.8 and CEC of 68.1 $cmol_c\;kg^{-1}$. The X-ray diffractometry (XRD) revealed that clinoptilolite and mordenite were the major minerals of natural zeolite. Smectite, feldspar and quartz also existed as secondary minerals. Optimum conditions of granulated zeolite production occurred when natural zeolite was mixed with Portland cement at a 4:1 ratio and granulated using the extruder, left to harden for one month at $25^{\circ}C$ and treated at $400^{\circ}C$ for 3 hours. The wide spectra of XRD revealed that the granulated zeolite had amorphous oxide minerals. The alkali- or thermal-treated natural zeolite exhibited pH-dependent charge properties. The major minerals of the granulated zeolite were clinoptilolite, mordenite and tobermorite. The buffering capacity and charge density of the granulated zeolite were greater than those of natural zeolite.

• The KIPS Transactions:PartC
• /
• v.15C no.5
• /
• pp.391-398
• /
• 2008

To provide IPTV service over mobile networks, the mechanism that reduce packet loss and interrupt of multimedia service during the handover should be supported. Especially, buffering based mechanism is preferable for supporting IPTV services in the way of preserving streaming service using stored data and recovering non-received data after handover. But previous research doesn't consider the buffer allocation for applying various environments which can change handover time or end to end delay of relay node. This paper propose DBAHAJ mechanism that optimize buffer size of mobile nodes and relay node for supporting seamless IPTV service over mobile environments. Mobile node determines buffer size by checking handover time and maximum difference of sequence to keep playing video data. And multicast agent recovers packet loss during the handover by sending buffered data. By these two procedure, node supports seamless IPTV service on mobile networks. We confirm performance of this mechanism on NS-2 simulator.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.758-765
• /
• 2007

In this paper, we propose an efficient seamless handoff scheme to minimize packet loss and unnecessary packets on the Internet using the peculiar mobility characteristics of public vehicles such as trains. MR (Mobile Router) in a train visits each AR (Access Router) in the fixed order. As the MR detects reachability to the NAR (Next Access Router) on the new link, the PAR (Previous Access Router) can directly deliver packets from MR's HA (Home Agent) to the NAR according to the HML (Handoff Mobile router List). Then. the NAR buffers them until the MR finishes L3 (Layer 3) handoff procedure with the NAR. Therefore, our scheme can support a seamless handoff without the packet loss and unnecessary packets on the Internet. The result of our performance evaluation has shown that the proposed scheme could provide excellent performance, compared with the NEMO basic support protocol and the Bi-casting protocol.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.1
• /
• pp.41-48
• /
• 2008

Fermentative $H_2$ production was studied using microbial consortia isolated from heat-treated ($90{\circ}C$, 20 min) sewage sludge. Important parameters investigated were carbon(C) and nitrogen(N)-sources, C/N ratio, phosphate concentration, pH and temperature during anaerobic cultivation in serum bottles. Starch, ribose, sucrose and glucose were good C-sources for the culture growth and $H_2$ production. Yeast extract was better N-source than $(NH_4)_2SO_4$ or peptone when individually added to the synthetic media, however the combination of above three N-sources exhibited the additional effect for cell growth and $H_2$ evolution. Addition of 100 mM phosphate as a buffering agent prevented the rapid pH drop during the cultivation. The optimum initial pH for the cell growth was at 7.0, whereas $H_2$ production was observed at pH 5.5. Optimum temperature for the cell growth and $H_2$ production was $37{\circ}C$. Initial C/N ratio of 1.22 in the media using glucose and yeast extract as the C- and N-sources, respectively, showed the $H_2$ yield 1.0 mol $H_2$/mol glucose.

• Journal of Environmental Science International
• /
• v.20 no.12
• /
• pp.1617-1624
• /
• 2011

Caustic (NaOH) solution is used to remove $H_2S$ from hydrocarbon streams in petroleum refining industry, gradually being, so called, spent sulfidic caustic (SSC) which has high levels of $H_2S$ and alkalinity. Thus, SSC can be used as an electron donor and a buffering agent for autotrophic denitrification. As SSC, however, contains some non-biodegradable organics, air stripping was conducted to remove the non-biodegradable organics. As a result, over 93 % of the non-biodegradable organics was removed within 30 min of aeration. Then, $Na_2S_2O_3{\cdot}5H_2O$, methanol and organic matters, which are produced from a biodiesel production plant, were added to reform the air-stripped SSC and their products being referred to new sulfidic caustics (NSCs) I, II and III, respectively. Thereafter, to investigate the effect of these products on the removal of COD and TN, these products were injected to a biological nitrogen removal (BNR) process, resulting in additional 44 % TN removal without noticeable increase in the effluent COD level. Therefore, it can be said that the BNR process is a promising option to treat NSC as demonstrated in this study whose results can be useful for developing resource recovery technologies.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.3
• /
• pp.435-442
• /
• 2002

Phlegm is defined as the static fluid in excess in one or more parts of the body. It is not only a pathologic product but also a pathogen itself. However, as it says Phlegm is another title for the body fluid. phlegm can be physiological. In Hyungsang medicine. since the Hyungsang which an individual shows determines his or her illness. the principle to treat phlegm also varies according to the individual's Hyungsang. Thus, the author reviewed ‘Jisan’s Special Lectures for Clinicians’ and summarized the concepts and diagnostics of phlegm, and treatment and regimens by Hyungsang medicine. The concepts of phlegm : Phlegm is not only a pathologic product of disharmony of Jung(精), Ki(氣), Shin(神) and Hyul(血) but also a driving force to mature and transform these constituents. Phlegm is another designation for the Fluid. Phlegm can act as an alternative substance or buffering agent. If we describe our body as the habitat of worms. phlegm could be the inhabitant. Diagnostics of phlegm : The infraorbital areas have a dark-gray or blackish coloring. A man who is feminine or a woman who is masculine tends to develop phlegm. One of the major signs of phlegm is pain in Chungwan(中脘). The color of the skin does not change. Treatment of phlegm by Hyungsang medicine. For the Jung type(精科) and the Hyul type(血科), phlegm treatment is to supply Jung and Blood or eliminate Damp-phlegm. The man needs tonifying herbs and the woman needs herbs which promote the flow of Ki(氣). Children and the aged are. tegardless of the nature of disease, to be warmed and supplemented. For the heavy man. treatment is to supplement Ki and eliminate Damp; for the slim man. treatment is to supplement Yin(陰) and purge Heat.

• Journal of KIISE:Information Networking
• /
• v.30 no.5
• /
• pp.595-603
• /
• 2003

To provide mobile nodes with continuous communication services, it is important to reduce the packet losses during handoffs. The handoffs of mobile nodes cause packet losses and decrease of TCP throughput on account of a variety of factors. One of those is the congestion in the new cell. Due to the congestion, not only the node moving into the cell but also the already existing nodes that were successfully communicating in the cell suffer the performance degradation. In this paper we propose a new handoff mechanism called‘packet freeze control’, which avoids the congestion caused by handoffs by regulating the influx of traffic burst into the new cell. Packet freeze control is applicable to a wireless network domain in which FAs(Foreign Agents) are connected hierarchically and constitute a logical tree. It gradually increases the number of packets transferred to the new cell by buffering packets in the FAs on the packet delivery path over the wireless network domain. The simulation results show that the proposed mechanism not only reduces the packet losses but also enhances the TCP throughput of other mobile nodes in the cell.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.136-139
• /
• 2003

Copper has attractive properties as a multi-level interconnection material due to lower resistivity and higher electromigration resistance as compared with Alumina and its alloy with Copper(0.5%). Among a variety of agents in Copper CMP slurry, $H_2O_2$ has commonly been used as the oxidizer However. $H_2O_2$ is so unstable that it requires stabilization to use as oxidizer Hence, stabilization of $H_2O_2$ is a vital process to get better yield in practical CMP process. In this article the stability of Hydrogen Peroxide as oxidizer of Copper CMP slurry has been investigated. When alumina abrasive was used, $\gamma$-particle Alumina C had a better stability than $\alpha$-particle abrasive. As adding KOH as pH buffering agent, $H_2O_2$ stability in slurry decreased. Urea hydrogen peroxide was used as oxidizer, an enhanced stability was gotten. When $H_3PO_4$ as $H_2O_2$ stabilizer was added, the decrease of $H_2O_2$ concentration in slurry became slower. Even though adding $H_2O_2$ in slurry after bead milling lead to better stability than in advance of bead milling, it had a lower dispersibility.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.175-176
• /
• 2022

By studying the characteristics of matrix insulated through heat generated through oxidation of iron powder, the basic research results on the possibility of buffering and applicability of Cold weather concrete as a curing method are presented. In order to prevent freezing due to a sharp decrease in temperature in the initial stage of curing, iron powder (Fe), powder activated carbon, which is a small amount of porous carbonaceous adsorbent, and salt (NaCl) as an oxidizing agent are replaced with iron powder admixture. As the curing temperature increases, the strength tends to increase, and when replacing the admixture at the same curing temperature, the strength slightly decreases. This is determined as a result of generating iron oxide through an oxidation reaction of iron powder, activated carbon, and NaCl generating a large amount of pores in the matrix. In addition, the internal temperature tends to increase as the mixing substitution rate increases, and it is judged that the oxidation heat of the iron powder mixture affects the increase of the internal temperature during curing. The higher the replacement rate of the iron powder mixture, the slightly lower the strength, but it is determined that freezing and melting that may occur in the early stage of curing can be prevented due to an increase in the initial internal temperature.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.153-160
• /
• 2005

There have been large areas of soil contaminated with high levels of explosives. For this experimental work, 2,4,6-trinitrotoluene (TNT) was tested as a representative explosive contaminant of concern in both aqueous and soil samples and its removal was evaluated using three different chemical treatment methods: 1) the classical Fenton reaction which utilizes hydrogen peroxide ($H_2O_2$) and soluble iron at pH less than 3; 2) a modified Fenton reaction which utilizes chelating agents, $H_2O_2$, and soluble iron at pH 7; and 3) a Fenton-like process which utilizes iron minerals instead of soluble iron and $H_2O_2$, generating a hydroxyl radical. Using classic Fenton reaction, 93% of TNT was removed in 20 h at pH 3 (soil spiked with 300 mg/L of TNT, 3% $H_2O_2$ and 1mM Fe(III)), whereas 21% removed at pH 7. The modified Fenton reaction, using nitrilotriacetic acid (NTA), oxalate, ethylenediaminetetraacetic acid (EDTA), acetate and citrate as representative chelating agents, was tested with 3% $H_2O_2$ at pH 7 for 24 h. Results showed the TNT removal in the order of NTA, EDTA, oxalate, citrate and acetate, with the removal efficiency of 87%, 71%, 64%, 46%, and 37%, respectively, suggesting NTA as the most effective chelating agent. The Fenton-like reaction was performed with water contaminated with 100 mg/L TNT and soil contaminated with 300 mg/L TNT, respectively, using 3% $H_2O_2$ and such iron minerals as goethite, magnetite, and hematite. In the goethite-water system, 33% of TNT was removed at pH 3 whereas 28% removed at pH 7. In the magnetite-water system, 40% of TNT was removed at pH 3 whereas 36% removed at pH 7. In the hematite-water system, 40% of TNT was removed at pH 3 whereas 34% removed at pH 7. For further experiments combining the modified Fenton reaction with the Fenton-like reaction, NTA, EDTA, and oxalate were selected with the natural iron minerals, magnetite and hematite at pH 7, based on the results from the modified Fenton reaction. As results, in case magnetite was used, 79%, 59%, and 14% of TNT was removed when NTA, oxalate, and EDTA used, respectively, whereas 73%, 25%, and 19% removed in case of hematite, when NTA, oxalate, and EDTA used, respectively.