• 한국전산유체공학회지
• /
• 제12권3호
• /
• pp.41-46
• /
• 2007

Dynamic behavior of immiscible gas bubble attached to the wall in channel flow plays very important role in many engineering applications. Special attention has been paid to micro direct methanol fuel cell(${\mu}$DMFC) where surface tension becomes dominant factor with minor gravitational effect due to its reduced size. Therefore, displacement of $CO_2$ bubble generating on a cathode side in ${\mu}$DMFC can be very difficult and efficient removal of $CO_2$ bubbles will affect the overall machine performance considerably. We have focused our efforts on studying the dynamic behavior of immiscible bubble attached to the one side of the wall on 2D rectangular channel subject to external shear flow. We used Level Contour Reconstruction Method(LCRM) which is the simplified version of front tracking method to track the bubble interface motion. Effects of Reynolds number, Weber number, advancing/receding contact angle and property ratio on bubble detachment characteristic has been numerically identified.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.768-772
• /
• 2009

This paper proposes a method for measurement three-dimensional trajectories of bubbles generated around a swimmer's arms from stereo high-speed camera videos. This method is based on two techniques: two-dimensional trajectory estimation in single-camera images and trajectory pair matching in stereo-camera images. The two-dimensional trajectory is estimated by block matching using similarity of bubble shape and probability of bubble displacement. The trajectory matching is achieved by a consistensy test using epipolar constraint in multiple frames. The experimental results in two-dimensional trajectory estimation showed the estimation accuracy of 47% solely by the general optical flow estimation, whereas 71% taking the bubble displacement into consideration. This concludes bubble displacement is an efficient aspect in this estimation. In three-dimensional trajectory estimation, bubbles were visually captured moving along the flow generated by an arm; which means an efficient material for swimmers to swim faster.

• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.1926-1932
• /
• 2001

In this second part of the paper, the automatic mesh generation and remeshing algorithm using bubble packing method is applied to the nonlinear problem. The remeshing/refinement procedure is necessary in the large deformation process especially because the mesh distortion deteriorates the convergence and accuracy. To perform the nonliear analysis, the transfer of state variables such as displacement and strain is added to the algorithm of Part 1. The equilibrium equation based on total Lagrangian formulation and elasto-viscoplastic model is used. For the numerical experiment, the upsetting process including the contact constraint condition is analyzed by two refinement criteria. And from the result, it is addressed that the present algorithm can generate the refined meshes easily at the largely deformed area with high error.

• 대한조선학회논문집
• /
• 제57권5호
• /
• pp.271-277
• /
• 2020

Recoverability and vulnerability of navy ships under underwater explosion are critical verification factors in the acquisition phase of navy ships. This paper aims to establish numerical analysis techniques for the underwater explosion of navy ships. Doubly Asymptotic Approach (DAA) Equation of Motion (EOM) of primary shock wave and secondary bubble pulse proposed by Geers-Hunter was introduced. Assuming a non-compressive fluid, reference solution of the DAA EOM of Geers-Hunter using Runge-Kutta method was derived for the secondary bubble pulse phase with an assumed charge conditions. Convergence analyses to determine fluid element size were performed, suggesting that the minimum fluid element size for underwater explosion analysis was 0.1 m. The spherical and cylindrical fluid domains were found to be appropriate for the underwater explosion analyses from the fluid domain shape study. Because the element size of 0.1 m was too small to be applied to the actual navy ships, a very slender beam with the square solid section was selected for the study of fluid domain existence effect. The two underwater explosion models with/without fluid domain provided very similar results in terms of the displacement and stress processes.

• 한국강구조학회 논문집
• /
• 제16권3호통권70호
• /
• pp.295-303
• /
• 2004

본 연구에서는 등방성 및 복합적층판 해석을 위해 추가변형률을 갖는 개선된 4절점 Reissner-Mindlin 평판휨요소를 제안하였다. 전단잠김현상과 가상적인 제로에너지모드를 제거하기 위해 비적합 변위모드와 Bubble 함수식에 근거한 새로운 형태의 전단변형률을 추가함으로써 횡방향 전단거동을 개선하였다. Andelfinger와 Ramm(1993)이 제시한 기본적인 추가변형률은 면내거동을 개선시키고자 그대로 적용하였다. 1차전단변형이론에 근거한 새로 개발된 4절점 평판요소를 '14EASP'라 명하였다. 14EASP 유한요소의 특징과 성능을 평가하고자 몇가지의 수치해석예제를 적용하였으며, 다른 유한요소 및 해석적인 해와 비교하였다. 그 결과 본 연구에서 제안한 14EASP는 보다 안정적이고, 수렴성이 빠르며, 특히 요소형상이 왜곡된 경우에도 정확한 결과를 도출하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.258-258
• /
• 2014

Spark discharge in water generates shockwaves which have been utilized to generate mechanical actuation for potential use in pumping application. Discharge pulses of several microseconds generate shockwaves and vapor bubbles which subsequently displace the water for a period of milliseconds. Through the use of a sealed discharge chamber and metal bellow spring, the fluid motion can be used create an oscillating linear actuator. Continuous actuation of the bellow has been demonstrated through the use of high frequency spark discharge. Discharge in water forms a region of high electric field around the electrode tip which leads to the creation of a thermal plasma channel. This process produces fast thermal expansion, vapor and bubble generation, and a subsequent shockwave in the water which creates physical displacement of the water [1]. Previous work was been conducted to utilize the shockwave effect of spark discharge in water for the inactivation of bacteria, removal of mineral fouling, and the formation of sheet metal [2-4]. Pulses ranging from 25 to 40 kV and 600 to 900 A are generated inside of the chamber and the bellow motion is captured using a slow motion video camera. The maximum displacements measured are from 0.7 to 1.2 mm and show that there is a correlation between discharge energy input to the water and the displacement that is generated. Subsequent oscillations of the bellow are created by the spring force of the bellow and vapor in the chamber. Using microsecond shutter speed ICCD imaging, the development of the discharge bubble and spark can be observed and measured.

• 치과방사선
• /
• 제22권2호
• /
• pp.339-348
• /
• 1992

The purpose of this study was to evaluate the correlationship between histopathologic types of ameloblastoma and their radiographic appearances. The materials for this study consisted of 106 patients diagnosed as ameloblastoma both radiographically and histologically. The obtained results were as follows: 1. The incidence of ameloblastoma in male(60cases, 56.6%) was slightly higher than that in female (46 cases, 43.4%). The average age was estimated as 30.7 years with a range from 6 to 76 years. The second decade revealed the highest rate. 2. 106 ameloblstomas were histopathologically classified as 36 unicystic, 28 plexiform, 20 follicular, 14 acanthomatous, 7 granular cell, and 1 basal cell ameloblastoma. 3. Unilocular, soap-bubble appearance and scalloped margin were the radiographic appearances frequently seen in unicystic ameloblastoma. The predominant radiographic appearance of plexiform ameloblastoma showed unilocular radiolucency with scalloped margin. 4. 19.8%, 21 cases of ameloblastoma in this study showed containing tooth in their tumor mass by radiography. 5. Root resorption occured in 37 cases(34.9%) and tooth displacement in 7 cases(6.6%). Root resorption and tooth displacement occured in same patient were 24 cases(22.6%). 6. Recurrence occured in 21.7% and average year between initial treatment and recurrence were 2 years.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.303-310
• /
• 2001

We propose the framework which directly links shell finite element to the free form surface geometric modeling. For the development of a robust shell element, a first order shear deformable shell theory and partial mixed variational functional are provided. Bubble functions are included in the shape function of displacement to improve the performance of the developed element. The Spline/NURBS is used to generate the general free form of parameterized shell surfaces. The proposed shell finite element model linked with NURBS surface representation provides efficiency for design and analysis. Numerical examples are given in order to assess the accuracy of the performances of the proposed element.

• 대한기계학회논문집B
• /
• 제27권2호
• /
• pp.188-196
• /
• 2003

Liquid-assisted cleaning technology utilizing a nanosecond laser pulse is effective for removing submicron particulates from a variety of solid substrates. In the technique, saturated vapor is condensed on a solid surface to form a thin liquid film and the film is evaporated explosively by laser heating. The present work studies the role of liquid-film evaporation in the cleaning process. First, optical interferometry is employed for in-situ monitoring the displacement of the laser-irradiated sample in the cleaning process. The experiments are performed for estimating the recoil force exerted on the target with and without liquid deposition. Secondly, time-resolved visualization and optical reflectance probing are also conducted for monitoring the phase-change kinetics and plume dynamics in vaporization of thin liquid layers. Discussions are made on the effect of liquid-film thickness and dynamics of plume and acoustic wave. The results confirm that cleaning force is generated when the bubble nuclei initially grow in the strongly superheated liquid.

• 대한토목학회논문집
• /
• 제14권6호
• /
• pp.1357-1363
• /
• 1994

난류전단 흐름에서의 기포응집에 따른 기포의 크기분포를 예측하기 위한 Monte-Carlo 모의모형을 개발하였다. 임의로 선택된 각 초기위치에 일련의 기포들을 매시각 발생시키고, 각 기포들의 움직임과 충돌을 모의함으로써 각각의 위치와 크기를 추적하도록 하였다. 기포의 횡방향 변위는 이송확산 방정식의 수치해를 이용하여 부여하였으며, 종방향 변위는 흐름의 대수유속분포 및 기포 상승속도로부터 주어지도록 하였다. 각 기포들간의 초기 상대위치와 상대변위를 이용한 기하학적 해석에 의하여 매시간단계에서의 기포응집을 탐지하여, 시간단계 말기에서의 기포 총수, 각 기포의 위치 및 크기를 결정하였다. 기포들의 크기 및 위치를 나타내기 위하여 소요되는 기억용량을 최소화하도록 전산모형을 구성하였다.