• 제목/요약/키워드: bridge structure

Search Result 1,747, Processing Time 0.037 seconds

A Study on the Flexural Minimum Reinforcement for Prevention of Brittle Failure Specified in KCI and EN Codes (유럽과 국내기준에 규정된 취성파괴 방지를 위한 휨 최소철근량 고찰)

  • Park, Sung-Jae;Kang, Tae-Sung;Moon, Do-Young
    • Journal of the Korea Concrete Institute
    • /
    • v.26 no.2
    • /
    • pp.211-218
    • /
    • 2014
  • In the design of reinforced rectangular concrete beam structure, the minimum amount of flexural reinforcement is required to avoid brittle failure. KCI code is based on concept of ultimate strength and usually used as a model code. But bridge design code enacted by Ministry of land, transportation and maritime affairs in 2012 is based on concept of limit state and similar to Euro code EN 1992-2. This means that the minimum reinforcement presented in both design codes has different origination and safety margin. When rectangular concrete beams with minimum reinforcement are designed according to EN and KCI codes, the amount of minimum reinforcement specified in EN code is only 76% of that in KCI code. This makes the design engineers to be confused. In this study, flexural tests were conducted on nine beams with the two different minimum reinforcement specified in KCI and EN design codes. In results, the measured ratios of nominal strength to crack strength from the test were about 25% greater than those evaluated from the equations presented in KCI and EN codes. The EN beams having only 76% of the minimum reinforcement for the KCI beams were fractured by rupture of steel reinforcement but in ductile manner. It is confirmed that the minimum reinforcement concrete beams designed according to both codes have enough safety margin in flexural capacity and moreover in ductility.

A Study on Influence of Constructed Bridge Abutment in Landfill Slope under Laterally Displacing (측방유동 발생 시 성토사면에 시공된 교대의 영향에 대한 연구)

  • Lee, Hangyu;Hong, Jongouk;Chun, Byungsik
    • Journal of the Korean GEO-environmental Society
    • /
    • v.14 no.12
    • /
    • pp.31-41
    • /
    • 2013
  • The damage caused by lateral movement occurs frequently on site where abutment or retaining wall was built on soft ground along with embankment behind and the study on stability of abutment against lateral movement has been mostly focused on soft ground. However lateral movement occurs not only on soft ground but also on embankment slope which causes the impact on structure. The bridges built in Korea are mostly on mountainous area than soft ground. This study is intended to analyze the ground behavior resulting from lateral movement using finite element analysis method to the section as well as propose the basic data for abutment design on embankment slope through the analysis of the outcome of reinforcement method. As a result, when it comes to the reinforcement with soil surcharge and stabilized pile in slope, lateral movement was reduced by 4~30% and displacement on bearing shoe on abutment was reduced by 2~13%. On the contrary, when reinforced with EPS, lateral float was reduced by 97% and maximum horizontal displacement of bearing shoe on abutment was reduced by 95%. Thus, it's necessary to identify the design technique which is applicable to domestic condition through additional tests and more reliable study using numerical analysis and comparing the measured values shall follow.

Experimental Evaluation of Weathering Performance for Duplex Coating Systems Combining Thermal Spraying Metals and Painting (금속용사와 도장의 복합피복방식법에 대한 실험적 내후성능평가)

  • Kim, In Tae;Jun, Je Hyong;Cha, Ki Hyuk;Jeong, Young Soo;Ahn, Jin Hee
    • Journal of Korean Society of Steel Construction
    • /
    • v.28 no.5
    • /
    • pp.373-382
    • /
    • 2016
  • Painting or thermally sprayed metal coating is often used in corrosion protection of steel structures. In recently, duplex coating system which combines thermally sprayed metals with paint is selected as a new generic type of coatings on steel structures under the highly corrosive environments. In this study, the structural steel specimens were surface treated, thermally sprayed with zinc, zinc-15%aluminum alloy, aluminum and aluminum-5%magnesium alloy, and finally sealing or painted with acrylic urethane. And as a reference specimens, steel specimens were painted with acrylic urethane after surface treatment. Circular defects with 1.0, 3.0 and 5.0 mm in diameters and line defect with 2.0 mm width, which reach the steel substrate were created on all specimens. The specimens were exposed into an environmental testing chamber controlled by the ISO 20340, which is a laboratory cyclic accelerated exposure test condition of spraying/UV/low temperature, for up to 175 days. Based on the corrosion tests, corrosion deterioration from the initial defects were evaluated and weathering performance of the specimens are compared.

A Study on the Resistance to Sea Water and High Flowing Properties of Concrete Using Blended Low Heat Cement (혼합형 저발열 시멘트를 사용한 콘크리트의 초유동성 및 내해수성에 관한 연구)

  • 송용순;노재호;강석화
    • Magazine of the Korea Concrete Institute
    • /
    • v.10 no.6
    • /
    • pp.281-289
    • /
    • 1998
  • This study has been performed to test the flowability and filling ability of high flowing concrete as well as distribution of aggregate and pore of core specimen, heat of hydration, compressive strength and core strength of concrete. In addition, the resistance to chloride ion penetration and chemical solutionof concrete was tested in order to evaluate the resistance to sea water of concrete and its application of high flowing concrete using blended low heat cement in the field of Seohae Grand Bridge. The properties of high flowing concrete with blended low heat cement were compared with ordinary 25-240-15 concrete using Type V cement. As the results of this study, the flowability and filling ability of high flowing concrete with blended low heat cement is satisfied without vibration. Though the cement content of high flowing concrete with blended low heat cement was 400kg/m$^2$, the rising temperature of it was relatively lower than that of the ordinary 25-240-15 concrete with Type V cement. Also, the compressive of high flowing concrete with blended low heat cement is similar to that of the ordinary 25-240-15 concrete with Type V cement.

Eco-corridor Positioning for Target Species - By Field Surveying of Mammals' Road-Kill - (목표종 생태통로의 위치선정 -포유류 Road-kill 현장조사를 중심으로-)

  • Lee, Yong-Wook;Lee, Myeong-Woo
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.9 no.3
    • /
    • pp.51-58
    • /
    • 2006
  • The purpose of this research presents a method to position and makes the structure for eco-corridors reasonably with collectable analysing results of various effects shown in mammals' road-kill at 429 points. Target animals of this research are Leopard cat, Siberian weasel, Raccoon dog, Korean hare, Eurasian red squirrel, Siberian chipmunk and Water deer. The results derived from the empirical analysis on the contents above are followed. First, according to the results as for Leopard cat road kill analysis, which is designated as Endangered Species Class II, the eco-corridor might be located at near village having stead food in order to decrease the frequencies of road-kill, because its road kill points were mainly collected at 4 lane hilly road with mountain-road-farm area geological type of. Second, because Siberian weasel's road kill was detected at 2 lane hilly road with mountain-road-stream geological type, the eco-corridor might be located at near a mill to decrease road-kill frequencies. Third, the road-kill frequency of Eurasian red squirrel can be reduced when the eco-corridor is located at the area across coniferous tree near 4 lane west sea freeway with mountain-road-mountain. Fourth, the road-kill of Raccoon dog can be reduced when the eco-corridor is located at 4 lane mountain road or hilly road with the geological type having farm land-road-mountain(stream). Fifth, Korean hare's road-kill can be reduced when the eco-corridor is located at grass land across ridge line of mountain, because wild rabbit road kill was happened at 4 lane mountain road or 2 lane mountain road(mountain-road-mountain). Sixth, As for Siberian chipmunk, the eco-corridor might be located at the side slope of mountain road at 2 lane mountain road under the speed of 60km/h with mountain-road-mountain. Seventh, For Water deer, the eco-corridor might be located at 4 lane hilly road with mountain-road-farm land. As for Common otter, Amur hedgehog, Yellow-throated marten, Weasel, it is difficult to specify the proper site of eco-corridor due to the lack of data. Eco-corridors for carnivores might be well located at 4 lane hilly road or 2 lane hilly road with mountain-road-farm land, and the track for herbivores might be well located as a overhead bridge on mountain-road-mountain type across mountains. In order to position eco-corridors for wildlife properly, we have to research animal's behavior with ecological background, and to consider the local uniqueness and regularly collect the empirical road-kill data in long term 3 to 5 year, which can be the foundation for the more suitable place of wild life eco-corridors.

Three Non-Aspartate Amino Acid Mutations in the ComA Response Regulator Receiver Motif Severely Decrease Surfactin Production, Competence Development, and Spore Formation in Bacillus subtilis

  • Wang, Xiaoyu;Luo, Chuping;Liu, Youzhou;Nie, Yafeng;Liu, Yongfeng;Zhang, Rongsheng;Chen, Zhiyi
    • Journal of Microbiology and Biotechnology
    • /
    • v.20 no.2
    • /
    • pp.301-310
    • /
    • 2010
  • Bacillus subtilis strains produce a broad spectrum of bioactive peptides. The lipopeptide surfactin belongs to one well-known class, which includes amphiphilic membrane-active biosurfactants and peptide antibiotics. Both the srfA promoter and the ComP-ComA signal transduction system are an important part of the factor that results in the production of surfactin. Bs-M49, obtained by means of low-energy ion implantation in wild-type Bs-916, produced significantly lower levels of surfactin, and had no obvious effects against R. solani. Occasionally, we found strain Bs-M49 decreased spore formation and the development of competence. Blast comparison of the sequences from Bs-916 and M49 indicate that there is no difference in the srfA operon promoter PsrfA, but there are differences in the coding sequence of the comA gene. These differences result in three missense mutations within the M49 ComA protein. RT-PCR analyses results showed that the expression levels of selected genes involved in competence and sporulation in both the wild-type Bs-916 and mutant M49 strains were significantly different. When we integrated the comA ORF into the chromosome of M49 at the amyE locus, M49 restored hemolytic activity and antifungal activity. Then, HPLC analyses results also showed the comA-complemented strain had a similar ability to produce surf actin with wild-type strain Bs-916. These data suggested that the mutation of three key amino acids in ComA greatly affected the biological activity of Bacillus subtilis. ComA protein 3D structure prediction and motif search prediction indicated that ComA has two obvious motifs common to response regulator proteins, which are the N-terminal response regulator receiver motif and the C-terminal helix-turn-helix motif. The three residues in the ComA N-terminal portion may be involved in phosphorylation activation mechanism. These structural prediction results implicate that three mutated residues in the ComA protein may play an important role in the formation of a salt-bridge to the phosphoryl group keeping active conformation to subsequent regulation of the expression of downstream genes.

Dental Treatment of a Wolf-Hirschhorn Syndrome Patient: A Case Report (Wolf-Hirschhorn syndrome 환아의 치과 치료 치험례)

  • Kim, Miae;Park, Jihyun;Mah, Yonjoo
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.43 no.3
    • /
    • pp.313-319
    • /
    • 2016
  • Wolf-Hirschhorn syndrome (WHS), associated with the deletion of the short arm of chromosome 4, causes multiple congenital malformations. Patients suffer from various deformities, including mental and growth disorders, epilepsy, hypotonia, congenital heart defects, and atypical craniofacial features. The "Greek warrior helmet appearance" is the most characteristic feature, with a prominent glabella, high arched eyebrow, broad nasal bridge, and hypertelorism. Cleft lip with or without cleft palate is observed in 30% of patients. Dental structure anomalies also exist including multiple tooth agenesis and over-retained primary molars caused by MSX1 gene impairment, and cone-shaped and taurodontic teeth. This case, a 9-year-old girl with WHS, showed intellectual disability, delayed growth development, previous occurrence of seizures, otitis media, and the typical facial features of WHS. Dental findings included multiple congenital missing teeth, over-retained primary teeth, and severe caries on the primary molars. Dental treatments were performed under general anesthesia. This report documents the characteristics of WHS, including general and oral features, and discusses the importance of oral hygiene and preventive dental management.

A Study on Curriculum Guidelines for Computer Education based on the analysis of Status Quo in IT Advanced Countries (해외 주요국의 현황 분석에 기초한 우리나라 컴퓨터교육의 교육과정 방향)

  • Kim, Mi-Ryang
    • The Journal of Korean Association of Computer Education
    • /
    • v.8 no.3
    • /
    • pp.43-60
    • /
    • 2005
  • Teaching computer and ICT skills in K-12 helps to bridge the digital divide of the students at the minimum cost, and provides them with a chance of getting a Quality of life as well as a Quality of work in the future. From examining the education policies of U.S., EU, Canada, and other countries, concerning computer education, several factors, including vision and national-level policy, Quality of manpower, needs for computer-related technology, structure of IT industry, overall demand for IT specialists, have been identified as those with major impacts on the curriculum of computer education. Based upon the analysis of domestic key factors, three levels of computer education program are suggested. At the most basic and least controversial level, basic ICT-skill program for effective learning needs to be provided for every student. Next level is concerned with improving the Quality of life and work. A program for introductory level of computer science can be provided as extra-curricular classes for bright and eager students, who might want to be computer expert or specialists.

  • PDF

The Effect of SNS's Characteristic on Attitude Formation toward Jewelry Product and Jewelry Online Shopping Mall (SNS 기능적 속성이 주얼리 제품 및 온라인 쇼핑몰에 대한 태도형성에 미치는 영향에 관한 연구)

  • Cha, JinKyeng;Jin, ChangHyun
    • The Journal of the Korea Contents Association
    • /
    • v.14 no.10
    • /
    • pp.741-753
    • /
    • 2014
  • The objective of the study is to explore how to influence SNS's characteristics on attitude formation toward jewelry product and online shopping mall. SNS's characteristics are contextuality, responsiveness, social presence, and interaction as independent variables. Consumer satisfaction, worth of mouth and purchase intention are considered as dependent variables. Data were collected from a survey of 317 consumers who have experience to purchase jewelry product to examine their attitude toward SNSs, jewelry product, and online shopping mall from November 1 to November 15 2013. In order to test hypotheses, CFA analysis with covariance structure analysis was conducted using EQS6b. SNS's users have a tendency to perceive SNSs as bridge to connect other people and to get new information as well as they are willing to feel familiarity on SNSs. Users, who have a higher contextuality, responsiveness, social presence, and interaction of SNS's characteristics, are willing to have word of mouth intention of jewelry product as well as have high satisfaction. The study found that interaction is not effect on consumer satisfaction because interaction factor is to evaluate SNSs as one of the media.

Molecular Monitoring of Eukaryotic Plankton Diversity at Mulgeum and Eulsukdo in the Lower Reaches of the Nakdong River (낙동강 하류 물금과 을숙도 수환경의 진핵 플랑크톤 종조성에 대한 분자모니터링)

  • Lee, Jee Eun;Lee, Sang-Rae;Youn, Seok-Hyun;Chung, Sang Ok;Lee, Jin Ae;Chung, Ik Kyo
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.17 no.3
    • /
    • pp.160-180
    • /
    • 2012
  • We have studied the eukaryotic plankton species diversity to compare the community structure of fresh and brackish waters in the lower reaches of the Nakdong River using metagenomic methods. We constructed 18S rDNA clone libraries of total DNAs extracted from environmental water samples collected at Mulgeum (MG100929, fresh) and Eulsukdo bridge (ES, brackish). Through the steps of colony PCR, PCR-RFLP, sequencing and similarity analysis, we discovered the diverse species composition of eukaryotic plankton. Total 338 clones (170 at MG100929 and 168 at ES) were analyzed, and then we found 74 phylotypes (49 for MG100929 and 25 for ES). From the phylogenetic analysis, we confirmed various eukaryotic plankton of broad range of taxonomic groups, including Stramenopiles, Cryptophyta, Viridiplantae, Alveolata, Rhizaria, Metazoa, and Fungi. We also found several unreported species in Korea and candidates of new taxonomic entities at levels higher than genus. Especially, the cryptic species diversity including unreported phylotypes of Pirsonia (Stramenopiles) and Perkinsea (Alveolata) suggests that the molecular monitoring method can produce new informative biological data in monitoring the changes in the Nakdong River Mouth ecosystem.