• Kyungpook Mathematical Journal
• /
• v.62 no.1
• /
• pp.89-106
• /
• 2022

We are concerned with finding a common solution to an equilibrium problem associated with a bifunction, and a constrained convex minimization problem. We propose an iterative fixed point algorithm and prove that the algorithm generates a sequence strongly convergent to a common solution. The common solution is identified as the unique solution of a certain variational inequality.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.7
• /
• pp.552-558
• /
• 2009

An experimental study using the combustor with branch tube was conducted in order to model the industry combustor with FGR (flue gas recirculation) system and to study a thermo-acoustic instability generated by a branch tube. The branch tube is a structure used to modify a system geometry and then to change its pressure field, and the thermo-acoustic instability, usually occurs in a confined geometry, can result in serious problems on industrial combustors. Thus understanding of the instability created by modifying geometry of combustor is necessary to design and operate combustor with FGR system. Pressure fluctuation in the combustion chamber was observed according to diameter and length of branch and it was compared with the solution of 1-D wave equation. It was found that branch tube affects the pressure field in the combustion chamber, and the pressure fluctuation in the combustion chamber was reduced to almost zero when phase difference between an incipient wave in the combustion chamber and a reflected wave in the branch tube is $\pi$ at the branch point. Also, the reduction of pressure fluctuation is irrespective of the installed height of branch tube if it is below $h^*=0.9$ in the close-open tube and open-open tube.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.2
• /
• pp.173-181
• /
• 2019

This study was carried out numerically to investigate the flow characteristics in the Venturi tube with $90^{\circ}$ T-branch tube and the inflow of condensed water into the Venturi tube from the branch tube. In this study, the diameter of the branch tube(1, 2, 3mm) and the neck diameter of the Venturi tube(0.3, 0.9, 1.5mm) were varied. The flow rate of the water at the Venturi tube inlet is 80cc/min and the water temperature is 288K. The condensed water temperature at the branch tube inlet is 355K. It was found that the velocity and pressure of the fluid near the branch point in the Venturi tube were more dependent on the diameter of the Venturi tube than the diameter of the branch tube. The temperature of the mixed water at the exit of the Venturi tube was the highest when the Venturi tube's neck diameter is 0.9mm and the branch tube diameter is 2mm. This means that the condensed water is flowing well through the branch tube.

• The Korean Journal of Pain
• /
• v.8 no.2
• /
• pp.350-353
• /
• 1995

The first lesion in neural tissue produced by electrical currents were made in the 19th century by workers using direct current. In 1953, Sweet and Mark clearly demonstrated that DC lesions have unpredictable and ragged borders and may vary in size. They, as well as Hunsperger and Wyss, suggested that the use of high frequency currents might provide improved results and were proved correct. However, $Bovie^{(R)}$ electrosurgical unit may also be used in percutaneous medial branch neurotomy if a lesion made at a point or the dorsal surface of the transverse process just caudal to the most medial end of the superior edge of the transverse process (Bogduk's method). At this point the medial branch lies on the bone and its depth and medial displacement are defined by the bone which precludes the need for lateral radiographs to check placement. A lesion was made at same target point using the $Bovie^{(R)}$ electrosurgical unit in a 41 year male patient who had received a Kaneda operation because of L2 compression fracture. The patient was relieved of pain without any adverse effects.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.1
• /
• pp.33-42
• /
• 2010

In this study, new medial surface calculation methods using Voronoi diagrams are investigated for the point samples extracted on closed surface models. The medial surface is defined by the closure of all points having more than one closest point on the shape boundary. It is a one of essential geometric information in 3D and can be used in many areas such as 3D shape analysis, dimension reduction, freeform shape deformation, image processing, computer vision, FEM analysis, etc. In industrial parts, the idealized solid parts and shell shapes including sharp edges and vertices are frequently used. Other medial surface extraction methods using Voronoi diagram have inherent separation and branch problems, so that they are not appropriate to the sharp edged objects and have difficulties to be applied to industrial parts. In addition, the branched surfaces on sharp edges in shell shapes should be eliminated to obtain representative medial shapes. In order to avoid separation and branch problems, the new approach by analyzing the shapes and specially sampling on surfaces has been developed.

• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.1
• /
• pp.58-65
• /
• 2002

When we estimate the optimal solution satisfy the objective function and subjective equation in the integer programming, The optimal solution of the objective function Z is decided by the positive integer at extreme point or revised extreme point in the convex set. The convex set is made up the linear subjective equation. The purpose of the paper is thus to establish a stepwise optimization in the integer programming model by estimating the variation △C/sub j/ of the constant term C/sub j/ in the linear objective function, after an application of the modified Branch & Bound method.

• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 2002.05a
• /
• pp.349-357
• /
• 2002

This research is basically deals with an inventory distribution system with several regional sales branches. Under the continuous review policy, each sales branch places an order to its supplier whenever on hand plus on order inventory falls on the order point, and the order quantity is received after elapsing a certain lead time. This research first shows the method how to apply the product with low lever of demand into the continuous review policy. For the application, we use an order level as the maximum level of inventory during an order cycle. Also we analyze the lost sales case as a customer behavior. Further we use variable demands and variable lead times for more realistic situation. Based on the above circumstances, the research mainly discusses those methods to decide the optimal order level, order point, and order quantity for each sales branch which guarantees the system wide goal level of service, while keeping the minimum level of the system wide total inventory.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.3
• /
• pp.78-84
• /
• 2002

This research is basically deals with an inventory distribution system with several regional sides branches. Under the continuous review policy, each sales branch places an order to its supplier whenever on hand plus on order inventory falls on the order point, and the order quantity is received after elapsing a certain lead time. This research first shows the method how to apply the product with low lever of demand into the continuous review policy. For the application, we use an order level as the maximum level of inventory during an order cycle. Also we analyze the lost sales case as a customer behavior. Further we use variable demands and variable lead times for more realistic situation. Based on the above circumstances, the research mainly discusses those methods to decide the optimal order level, order point, and order quantity for each sales branch which guarantees the system wide goal level of service, while keeping the minimum level of the system wide total inventory.

• Honam Mathematical Journal
• /
• v.42 no.2
• /
• pp.391-409
• /
• 2020

In the current paper, the intuitionistic fuzzy normed space version of Hyers-Ulam stability for multi-additive, multi-cubic and multi-additive-cubic mappings by using a fixed point method are studied. Moreover, a few corollaries corresponding to some known stability and hyperstability outcomes in intuitionistic fuzzy normed space are presented.

• Communications of the Korean Mathematical Society
• /
• v.13 no.1
• /
• pp.95-107
• /
• 1998

In this paper we prove the Hopf-Rinow theorem for CAT(0) spaces and show that the ideal boundaries of complete CAT(0) manifolds of dimension 2 or 3 with some additional conditions are homeomorphic to the circle or 2-sphere by the characterization of the local shadows around the branch points.