• 한국소음진동공학회논문집
• /
• 제19권11호
• /
• pp.1192-1201
• /
• 2009

Analysis of the vibration characteristic for cylindrical shell is more complex than plates since the coupling effects are considered on three dimensions. Based on Love's equation, spectral finite element method(SFEM) is introduced to predict frequency response function of finite circular cylindrical shell in the air with simply supported - free boundary condition without simplifying the equation of motion. And for the radiated noise analysis of cylindrical shell, indirect boundary element method(BEM) is applied using out-of-plane displacements as an input from structural vibration analysis. Comparisons of the structural vibration results by the spectral finite element method and commercial code, NASTRAN(FEM based) are carried out. Likewise, for verification of radiated noise analysis results, commercial code, SYSNOISE(BEM based) are used.

• 대한의용생체공학회:의공학회지
• /
• 제11권2호
• /
• pp.217-226
• /
• 1990

This paper presents a new algorithm that extracted lung region in X-ray and enhanced the region. With a lung region that was extracted by histogram threshold value, it was diffi cult to detect perfect lung boundary. Therefore we presented perfect lung boundary detection method using apex detection and apex region restoration. Also, by applying modified equalization algorithm and presented function to inside of lung region, we want to give help to automatic diagnosis In X-ray chest image. Presented main line trace algorithm gave good result in detection of lung boundary And, as apex detection method using lung row and column gray level average value found more correct place of lung than the rpethod of prior algorithm, we succeeded perfect lung region detection, Also, presented function that had lung region's gray level distribution characteristic was very effective to image enhancement.

• 한국전산구조공학회논문집
• /
• 제22권4호
• /
• pp.315-322
• /
• 2009

본 논문은 확장된 이동최소제곱 유한차분법을 이용하여 1차원 Stefan 문제를 해석할 수 있는 새로운 수치기법이 제시한다. 이동하는 계면경계의 자유로운 수치적인 묘사를 위해 요소망이나 그리드 없이 절점만을 사용하는 이동최소제곱 유한차분법을 도입하고, 계면경계의 특이성을 모형화하기 위해 Taylor 다항식에 쐐기함수를 도입하여 확장했다. 지배방정식의 차분은 안정성을 보장해 주는 음해법(implicit method)을 이용한다. 이동경계를 포함한 반무한 융해문제, 실린더 형상의 고체화 문제의 수치해석을 통해 확장된 이동최소제곱 유한차분법이 높은 정확성과 효율성을 갖는 것을 보였다.

• 한국전산구조공학회논문집
• /
• 제22권1호
• /
• pp.117-124
• /
• 2009

2차원 포텐셜 문제를 해석하기 위해 고차의 르장드르 형상함수에 기초를 둔 p-수렴 경계요소법이 제안되었다. p-수렴 경계요소법은 종래의 경계요소법에서 사용되는 형상함수와 성질이 다른 르장드르 다항식을 형상함수로 사용한다. p-수렴 유한요소법과 마찬가지로 고차의 형상함수에 따른 절점의 위치가 경계상에서 정해지지 않는다. 따라서 형상함수가 증가함에 따라 선형방정식을 구성하기 위한 수단으로 선점법을 이용하였다. p-수렴 경계요소법에서 선점법은 비대칭 계층적 선점법과 대칭 비계층적 선점법을 선택하여 수치해석을 수행하였다. 선택점들은 형상함수가 증가함에 따라 증가하는 성질을 나타내며 계층적 또는 대칭적으로 선택될 수 있다. p-수렴 경계요소법에서 나타나는 특이 적분항을 계산하기 위해 special numeric quadrature technique와 semi-analytical integration technique를 사용하였다. 사각모서리부에서 특이성을 가지는 L-형 영역문제를 해석한 결과 적은 수의 자유도에서 기존문헌의 결과와 차이가 거의 없는 정도인 $10^{-2}%$단위 이하의 정확도를 보여주었다. 또한 같은 조건에서는 대칭형 선점의 위치를 이용해 계산한 값이 가장 높은 정확도를 보여주었다.

• 충청수학회지
• /
• 제29권4호
• /
• pp.631-642
• /
• 2016

This article deals with one-dimension backward heat conduction problem (BHCP). A new approach based on least squares support vector machines (LS-SVM) is proposed for obtaining their approximate solutions. The approximate solution is presented in closed form by means of LS-SVM, whose parameters are adjusted to minimize an appropriate error function. The approximate solution consists of two parts. The first part is a known function that satisfies initial and boundary conditions. The other is a product of two terms. One term is known function which has zero boundary and initial conditions, another term is unknown which is related to kernel functions. This method has been successfully tested on practical examples and has yielded higher accuracy and stable solutions.

• 대한기계학회논문집
• /
• 제19권4호
• /
• pp.981-989
• /
• 1995

A new weight function approach to determine SIF(stress intensity factor) using single-layer potential has been presented. The crack surface displacement field was represented by one boundary integral term whose kernel was modified from Kelvin's fundamental solution. The proposed method enables the calculation of SIF using only one SIF solution without any modification for the crack geometries symmetric in two-dimensional plane such as a center crack in a plate with or without an internal hole, double edge cracks, circumferential crack or radial cracks in a pipe. The application procedure to those crack problems is very simple and straightforward with only one SIF solution. The necessary information in the analysis is two reference SIFs. The analysis results using present closed-form solution were in good agreement with those of the literature.

• 전기의세계
• /
• 제21권3호
• /
• pp.48-52
• /
• 1972

The application of pontryagin's Maximum Principle to the optimal control eventually leads to the problem of solving the two point boundary value problem. Most of problems have been related to their own special factors, therfore it is very hard to recommend the best method of deriving their optimal solution among various methods, such as iterative Runge Kutta, analog computer, gradient method, finite difference and successive approximation by piece-wise linearization. The gradient method has been applied to the optimal control of two point boundary value problem in the power systems. The most important thing is to set up some objective function of which the initial value is the function of terminal point. The next procedure is to find out any global minimum value from the objective function which is approaching the zero by means of gradient projection. The algorithm required for this approach in the relevant differential equations by use of the Runge Kutta Method for the computation has been established. The usefulness of this approach is also verified by solving some examples in the paper.

• Journal of applied mathematics & informatics
• /
• 제27권1_2호
• /
• pp.183-194
• /
• 2009

In this paper, we considered the following four-point boundary value problem $\{{x"(t)+h(t)f(t,x(t),x'(t))=0,\;0<t<1\atop%20x'(0)=ax(\xi),\;x'(1)=bx(\eta)}\$. where $0\;<\;{\xi}\;<\;{\eta}\;<\;1,\;{\delta}\;=\;ab{\xi}\;-\;ab{\eta}\;+\;a\;-\;b\;<\;0,\;0\;<\;a\;<\;\frac{1}{\xi},\;0\;<\;b\;<\;\frac{1}{\eta}$. After the discussion of the Green function of the corresponding homogeneous system, we establish some criteria for the existence of positive solutions by using the generalized Leggett-William's fixed point theorem. The interesting point is the expression of the Green function, which is a difficulty for multi-point BVP.

• 대한기계학회논문집
• /
• 제18권8호
• /
• pp.2005-2015
• /
• 1994

An analytical method based on the upper bound approach for the cup-bar axisymmetric combined extrusion is presented to determine the deformation zones as well as extrusion load and deformed geometry in the early stage. A new kiematically admissible velocity field is derived by the appropriate transformation of the original velocity field and applying the flow function approach. The derived velocity field is directly related to the boundary function for the plastically deforming zones and the parameter controlling the flow direction to the forward part or backward part. Experiments are carred out with the annealed aluminum 2024 at room temperature for the various area reductions. The workhardening effect is considered in the formulation as a function of the height ratio between the deformed billet and the orighinal billet to calculate the extrusion pressures. The theoretical predictions for the extrusion loads and deformed configuration are in good agreement with the experimental results.

• 대한수학회보
• /
• 제57권5호
• /
• pp.1241-1249
• /
• 2020

Let Ω be a domain in ℂⁿ. Suppose that ∂Ω is smooth pseudoconvex of D'Angelo finite type near a boundary point ξ₀ ∈ ∂Ω and the Levi form has corank at most 1 at ξ₀. Our goal is to show that if the squeezing function s_Ω(𝜂_j) tends to 1 or the Fridman invariant h_Ω(𝜂_j) tends to 0 for some sequence {𝜂_j} ⊂ Ω converging to ξ₀, then this point must be strongly pseudoconvex.