• 소음진동
• /
• 제10권2호
• /
• pp.319-324
• /
• 2000

This paper shows hot to model the submerged elastic structures and adequate analysis tools for modal behavior when using finite element and boundary element method. Four different cases are reviewed depending on the location of the water and air. First case is that structures are filled with air and water is located outside. Second case is opposite to case one. These cases are solved by direct approach using collocation procedure. Third case is that water is located both sides of structures. Last case is that air is located both sides. These cases are solved by indirect approach using variational procedure. As analysis tools harmonic frequency sweep analysis and eigenvalue iteration method are selected to obtain the natural frequencies of vibrating submerged structures depending on the cases. Results are compared with closed form solutions of submerged spherical shell.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.730-735
• /
• 2007

This study is a comparison of the results of the orthropic material analysis at cantilever beam model using boundary element(BEM) method and finite element method(FEM). The program with the orthotropic material analysis was developed and applied to the examples in order to evaluate the accuracy of the programs. The examples shows that the results of the BEM is a good agreement with the ABAQUS results.

• Steel and Composite Structures
• /
• 제32권3호
• /
• pp.313-323
• /
• 2019

Ratcheting boundary is firstly determined by experiment, elastic-plastic finite element analysis combined with C-TDF and linear matching method, which is compared with ASME/KTA and RCC-MR. Moreover, based on elastic modulus adjustment procedure, a novel method is proposed to predict the ratcheting boundary for a pressurized pipe subjected to constant internal pressure and cyclic bending loading. Comparison of ratcheting boundary of elbow pipe determined by the proposed method, elastic-plastic finite element analysis combined with C-TDF and linear matching method, which indicates that the predicted results of the proposed method are in well agreement with those of linear matching method.

• 한국지반공학회지:지반
• /
• 제6권1호
• /
• pp.25-34
• /
• 1990

지하공동의 해석에 관한 유한요소법과 경계요소법의 해법은 많은 연구가 되어있다. 지하공동과 같은 구조물의 안정성해석시, 대상의 영역이 무한영역중의 극히 작은 일부분일 경우가 많다. 이 경우 무한영역은 비정의영역이므로 유한요소의 이산화가 불가능하며, 영향범위를가정하여 정의령 역으로 변환하면, 유한요소해석중에 강성매트릭스가 커지게되어 컴퓨터의 용량 및 계산시간상의 문제점을 일으키게 된다. 경계요소법을 적용하면, 무한영역을 고려할 수 있으나, 재료의 특성을 고려하기는 어려움이 많다. 본 논문은 특정부분의 변위 및 응력을 상세히 알 수 있으며,재료의 가음을 고려한 프로그램을 이용할 수 있는 유한요소법의 장점과 무한영역을 쉽게 고려할 수 있는 경계요소법의 장점을 갖는 유한요소와 경계요소를 결합한 해석법으로 무한탄성지반중의 지하공동안정해석에 대한 수치해석치와 이론치를 비교하여 효용성을 검토하였다. 그 결과 엄밀해에 가까운 경계요소법보다는 정도가 떨어지나 유한요소법보다는 정도가 개선되었다.

• 한국농공학회지
• /
• 제33권2호
• /
• pp.94-103
• /
• 1991

This study was carried out to investigate the engineering characteristics of the R.C circular ring sector plate with various boundary conditions and then to propose a rational and paraical method for application of finite element method to R.C structures. The stiffness matrix of the circular ring sector plate was obtained by using the multi-base coordinate system in which the base-coordinate systems were constructed for each nodal point of the quadrilateral element in order to reflect the complicated boundary conditions conveniently and correctly. The R.C element stiffness matrix was constructed by adding the stiffness coefficients of the steel-bar element into the plate bending element stiffness matrix. Herein, the steel-bar element was treated as the common beam element. Using the above method, the effects of steel-bar can be considered without increasing of the numbers of element and nodal points.

• 소음진동
• /
• 제7권6호
• /
• pp.975-984
• /
• 1997

A direct boundary element method (DBEM) is developed for thin bodies whose surfaces are rigid or compliant. The Helmholtz integral equation and its normal derivative integral equation are adoped simultaneously to calculate the pressure on both sides of the thin body, instead of the jump values across it, to account for the different surface conditions of each side. Unlike the usual assumption, the normal velocity is assumed to be discontinuous across the thin body. In this approach, only the neutral surface of the thin body has to be discretized. The method is validated by comparison with analytic and/or numerical results for acoustic scattering and radiation from several surface conditions of the thin body; the surfaces are rigid when stationary or vibrating, and part of the interior surface is lined with a sound-absoring material.

• 한국정밀공학회지
• /
• 제7권4호
• /
• pp.103-116
• /
• 1990

The mixed mode surface crack in finite-width plate subjected to uniform shearing has been analyzed in 3-D problem by using boundary element method. The calculations were carried out for the surface crack angles (${\alpha}$) of $0^{\circ}, 15^{\circ}, 30^{\circ}, 45^{\circ}, 60^{\circ}, and 75^{\circ}, $ and for the aspect ratio(a/c) of 0.2, 0.4, 0.6 and 1.0 to get stress intensity factors at the boundary points of the surface crack. For the aspect ratio of 1.0 and the surface crack angles, finite element method was used to check the results in this in this study. Comparison of the results from both method showed good agreement.

• 한국정밀공학회지
• /
• 제7권4호
• /
• pp.117-129
• /
• 1990

The mixed mode surface crack in finite-width plate subjected to uniform shearing has been analyzed in 3-D problem by using boundary element method. The calculations were carried out for the surface crack angles (${\alpha}$) of $0^{\circ}, 15^{\circ}, 30^{\circ}, 45^{\circ}, 60^{\circ}, and 75^{\circ}, $ and for the aspect ratio(a/c) of 0.2, 0.4, 0.6 and 1.0 to get stress intensity factors at the boundary points of the surface crack. For the aspect ratio of 1.0 and the surface crack angles, finite element method was used to check the results in this in this study. Comparison of the results from both method showed good agreement.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.539-540
• /
• 2008

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2705-2712
• /
• 2000

In meshless methods some techniques to impose essential boundary conditions have been developed since the approximations do not satisfy Kronecker delta properties at nodal points. In this study, new scheme for imposing essential boundary conditions is developed. Weight functions are modified by multiplying with auxiliary weight functions and the resulting shape functions satisfy Kronecker delta property on the bound ary nodes. In addition, the resulting shape functions possess and interpolation features on the boundary segments where essential boundary conditions are prescribed. Therefore the essential boundary conditions can be exactly satisfied with the new method. More importantly, the impositions of essential boundary conditions using the present method is relatively easy as in finite element method. Numerical examples show that the method also retains high convergence rate comparable to Lagrange multiplier method.