• Archives of Plastic Surgery
• /
• v.44 no.3
• /
• pp.188-193
• /
• 2017

Alveolar cleft is a tornado-shaped bone defect in the maxillary arch. The treatment goals for alveolar cleft are stabilization and provision of bone continuity to the maxillary arch, permitting support for tooth eruption, eliminating oronasal fistulas, providing an improved esthetic result, and improving speech. Treatment protocols vary in terms of the operative time, surgical techniques, and graft materials. Early approaches including boneless bone grafting (gingivoperiosteoplasty) and primary bone graft fell into disfavor because they impaired facial growth, and they remain controversial. Secondary bone graft (SBG) is not the most perfect method, but long-term follow-up has shown that the graft is absorbed to a lesser extent, does not impede facial growth, and supports other teeth. Accordingly, SBG in the mixed dentition phase (6-11 years) has become the preferred method of treatment. The most commonly used graft material is cancellous bone from the iliac crest. Recently, many researchers have investigated the use of allogeneic bone, artificial bone, and recombinant human bone morphogenetic protein, along with growth factors because of their ability to decrease donor-site morbidity. Further investigations of bone substitutes and additives will continue to be needed to increase their effectiveness and to reduce complications.

• Archives of Reconstructive Microsurgery
• /
• v.15 no.1
• /
• pp.26-32
• /
• 2006

Purpose: The purpose of this study was to evaluate the effectiveness of limb reconstruction and functional recovery using vascularized fibular graft in the treatment of extensive bone defect of long bone caused by various diseases. Materials and Methods: From september 1995 to March 2005, 21 patients with segmental bone defects were managed with vascularized fibular graft: 13 males and 8 females, aged 39 years on average (range, $8{\sim}65\;years$). The reconstructed site was the humerus in 9 patients, the femur in 5, the tibia in 4 and the forearm bone in 3. The length of bone defect ranged from $8{\sim}17\;cm$. Results: Twenty grafts were successful. The mean period to obtain radiographic bone union was 5.7 months on average. Conclusion: Fibular grafts allow the use of a segment of diaphyseal bone and of sufficient length to reconstruct most skeletal defects of the long bone. The vascularized fibular graft is indicated in patients with intractable nonunions where conventional bone grafting has failed or large bone defects.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.4
• /
• pp.386-390
• /
• 2007

This is about the case of loss of multiple teeth and alveolar bone caused by trauma, which needed alveolar bone augmentation before implant treatment. Alveolar bone was reconstructed using iliac bone graft, and thereafter first implant surgery was followed by consolidation period of 3 months. Iliac bone resorption was observed at the time of implant placement. And that resorption was more in the horizontal dimension than in the vertical. We conclude that additional treatment planning(e.g. using alveolar distraction osteogenesis or tissue expander) should be considered besides bone graft for vertical alveolar bone augmentation. For both maxilla and mandible, prosthodontic treatment was carried out $4{\sim}5$ months after implant placement. To compensate alveolar bone deficiency, partial hybrid overdenture on maxilla and implant-supported fixed bridge on mandible were fabricated, and the total treatment was finished.

• Journal of Periodontal and Implant Science
• /
• v.38 no.4
• /
• pp.723-728
• /
• 2008

Purpose: During guided bone regeneration procedures for the augmentation of deficient alveolar ridge, primary closure of flap is necessary. For primary flap closure, flap is repositioned coronally and the zone of attached keratinized mucosa may decreased. The need for attached keratinized mucosa around dental implants is still controversial, but sufficient peri-implant attached keratinized mucosa would be beneficial for functional and esthetic aspects. This case report presents three cases that demonstrated free gingival graft for increasing the zone of peri-implant attached keratinized mucosa which was decreased after guided bone regeneration. Materials and Methods: In first case, maxillary incisors were extracted and guided bone regeneration was performed simultaneously. Because the membrane was exposed at 3 weeks after operation, the membrane was removed and free gingival graft was performed for primary flap closure. Free gingival graft was performed again at implant placement for the increase of attached keratinized mucosa. In second case, guided bone regeneration was performed on lower right first molar area, and implant was placed with free gingival graft. In third case, lower right molar area showed insufficient attached keratinized mucosa after implant placement with guided bone regeneration. When abutments were connected, free gingival graft with apically positioned flap was performed. Result: In these three cases, the zone of attached keratinized mucosa around dental implants was decreased after guided bone regeneration. And the increase of peri-implant attached keratinized mucosa could be obtained effectively by free gingival graft. Conclusion: Free gingival graft could be a effective treatment method increasing the zone of attached keratinized mucosa which was decreased after guided bone regeneration procedures.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.141-147
• /
• 2011

The aim of this study was to evaluate histomorphometrically and compare the efficiency of various bone graft material and autogenous tooth bone graft material which were used in sinus bone graft procedure. Subjects were the 24 patients who had treated with sinus bone graft using lateral approach from October 2007 to September 2009 at SNUBH. The average age was $52.51{\pm}11.86$ years. All cases was taken after 4month of procedure and divided into 3 groups according to bone graft material. Group 1: autogenous tooth bone graft material, Group 2: OrthoblastII(integra lifescience corp. Irvine, US)+Biocera(Osscotec, seoul, korea), group 3: DBX(Synthes, USA)+BioOss(Geistlich Pharm AG, Wolhusen, Switzerland). Total 37 implant placement area were included and evaluated(7 in group 1, 10 in group 2, 20 in group 3). Evaluation of new bone formation, ratio of woven bone to lamellar bone, ratio of new bone to graft material were performed on each tissue section. Kruskal-Wallis test was used for statistical analysis(SPSS Ver. 12.0, USA). New bone formation were $52.5{\pm}10.7%$ in group 1, $52.0{\pm}23.4%$ in group 2, $51.0{\pm}18.3%$ in group 3. There were no statistical significant differences between each groups. Ratio of woven bone to lamella bone were $82.8{\pm}15.3%$ in group 1, $36.7{\pm}59.3%$ in group 2, $31.0{\pm} 51.2%$ in group 3. Ratio of new bone to graft material were $81.3{\pm}10.4%$ in group 1, $72.5{\pm}28.8%$ in group 2, $80.3{\pm}24.0%$ in group 3. After 4 month of healing period, all group showed favorable new bone formation and around graft material and implant. Within limitation of our study, it is suggested that autogenous tooth bone graft material might be used as novel bone graft material for sinus bone graft.

• Journal of Periodontal and Implant Science
• /
• v.37 no.4
• /
• pp.719-732
• /
• 2007

Purpose: Various bone graft materials are being used for periodontal tissue regeneration. Th materials are being developed continuously for ideal clinical effects. Therefore, it is necessary to identify the clinical characteristics of each bone graft material through comparing the various bone graft materials statistically and in doing so, proposing a more efficient bone graft material. In this study, the following results were attained through comparing the clinical effects among the bone graft materials, using the statistical method based on the clinical studies published at the department of periodontology of Yonsei hospital. Materials and Method: 6 selected studies of department of Periodontology at Yonsei University Hospital were based on clinical study of bone grafting in intrabony defects. It was compared the clinical parameters among the 6 clinical studies, using the statistical META analysis. Result: When comparing the probing depth reduction, there was a relatively great amount of decease when using the xenograft, Anorganic Bovine Derived Hydroxapatite Bone Matrix/Cell Binding Peptide(ABM/P-15: PepGen $P-15^{(R)}$) and the autogenous bone and absorbable membrane, d, 1-alctide/glycolide copolymer(GC: $Biomesh^{(R)}$). The allogfrafts showed a relatively low decrease in the probing depth and clinical attachment change. It also showed a slight decrease in the bone probing depth. The allografts showed various results according to different bone graft materials. When comparing the ABM/P-15 and bovine bone $powder(BBP^{(R)})$, ABM/P-15 showed a relatively high clinical attachment level and the bovine bone powder showed a relatively high clinical attachment level. The probing depth change and gingival recession change showed a lower value than the mean value between the two bone graft materials. The synthetic bone showed a relatively high decrease in clinical attachment level and periodontal probing depth change. There was a relatively larger amount of gingival recession when using Bioactive Glass(BG) but a relatively low bone regeneration effect was seen. Conclusion: Good restorative results of the periodontal tissue can be attained by applying the various bone graft materials being used today after identifying the accurate clinical effects.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.1
• /
• pp.55-59
• /
• 2013

In the oral and maxillofacial area, bone defects are created by various reasons and demand for bone grafts, while dental implant implantation has been increased consistently. To solve these problems, there has been development of autogenous tooth-bone graft material (AutoBT$^{(R)}$, Korea Tooth Bank Co., Korea), and we have collected ground reasons to substitute free autobone graft with this material in clinical use. This autogenous tooth-bone graft material is produced in powder type and block type. Block type is useful in esthetic reconstruction of the defect site and vertical and horizontal augmentation of alveolar bone because this type has high strength value, well maintained shape and is less absorbed. Therefore, the author of this study gained favorable result by grafting the block type autogenous tooth-bone graft material after dental implant implantation on the bone defects of the mandibular molar extraction site. Moreover, the author represents this case with literature review after confirming bone remodeling on the computed tomography image and by histological analysis.

• Archives of Plastic Surgery
• /
• v.35 no.3
• /
• pp.273-278
• /
• 2008

Purpose: The most widely accepted protocol for alveolar cleft reconstruction is to repair it during the mixed dentition stage. There were lower resorption rate (about 88%) at this stage. However we found some cases that need repeated bone grafting. Therefore we sought to analyze the cause of repeated alveolar bone grafting in connection with other factors. Methods: From January 2000 to January 2006, thirty-nine secondary alveolar bone grafts with iliac crest spongiosa were carried out. In 39 patients, 5 patients who had significant bone graft resorption received repeated alveolar bone graft. In all the cases, the causes of repeated bone grafts were dental root exposure(angulation), and the deficiency of the bony support for lateral incisor or canine eruption. In 3 cases, there was deficiency of the alveolar bone at the cleft side. There was the need of repeated bone grafts for orthodontic treatment in 2 cases and for application of dental implants in 1 case. Results: During the follow-up period, the clinical and radiologic examinations showed that repeated alveolar bone grafts were maintained successfully without any complications. The volume of the repeated bone graft was sufficient for orthodontic treatment and implantation. Conclusion: The essential conditions for successful alveolar bone grafting includes the status of cleft sided teeth, further treatment and planed schedule, as well as canine eruption. Alveolar bone grafting has to be performed with difference of each case in mind.

• The Journal of the Korean dental association
• /
• v.55 no.10
• /
• pp.725-732
• /
• 2017

Thin labial plate will be resorbed after extraction. Immediate implantation cannot prevent soft and hard tissue loss. Bone graft can be necessary in the immediate implantation after anterior tooth extraction. Slowly-resorbed or non-resorbable bone graft material have many advantages in esthetic area because of maintenance of volume. The clinicians should select the adequate cases of immediate implantation according to the indication and contraindication.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.3
• /
• pp.254-261
• /
• 2009

The maxillary sinus bone graft procedure is one of the predictable and successful treatments for the rehabilitation of atrophic and pneumatized edentulous posterior maxilla. Materials used for maxillary sinus floor augmentation include autogenous bone, allogenic bone, xenogenic bone and alloplastic materials. Among them, autogenous bone grafts still represents 'gold standard'for bone augmentation procedures. We selected the mandibular ramus area as a donor site for the autogenous bone graft because of low donor site morbidity. We performed maxillary sinus bone graft procedures with implant placement using particulated ramal autobone and bovine bone mixture, and got good results. This is a preliminary report of the maxillary sinus bone graft using particulated ramal autobone and bovine bone, requires more long-term follow up and further studies.