• 농촌계획
• /
• 제18권4호
• /
• pp.61-67
• /
• 2012

Recently, brick walls are being widely introduced in rural areas. Walls are a very important design element of space. However, most brick wall works do not consider the human psychological characteristics. The purpose of this study was to investigate psychological characteristics on brick wall bonds such as the stack bond, running bond, english bond, flemish bond, america bond. The results of the research can be summarized as follows: 1)There is no statistical difference of psychological evaluation results among student groups using the semantic differential scale method using 10 adjectives. 2)Stack bonds have an uninspiring, artificial, simple, restful, boring and ordered psychological characteristic. Running bonds have an uninspiring, restful and ordered psychological characteristic. America bonds have a unique and modernistic psychological characteristic. English bonds have a unique, modernistic, complex and chaotic psychological characteristic. Flemish bonds have no critical psychological characteristics. 3)The running bond earned the highest score in preference, while the stack bond scored the lowest. Employment of brick wall bonds on this study was not highly preferred, hence it is necessary to develop a new brick wall bond design. 4)In conclusion, the proper selection of brick wall bonds is very important and we should consider human psychological characteristics in the design of rural areas.

• 한국공작기계학회논문집
• /
• 제11권4호
• /
• pp.75-81
• /
• 2002

In this study, experiments were carried out to investigate the characteristics of grinding and wear process of diamond wheel during grinding ceramic materials. Normal component of grinding resistance was decreasing while increase of spindle speed. The resistance of vitrified bond wheel was less then that of resinoid bond wheel because of imbedded large holes on the surface of cutting edge. Surface roughness was decreasing while increase of spindle speed. The surface roughness using vitrified bond wheel was less than that of resinoid bond wheel because of small elastic deformation. After continuous finding of ceramics, cutting edge ratio of resinoid bond wheel decreased. For the case of vitrified bond wheel, cutting edge ratio did not change.

• 한국농공학회논문집
• /
• 제50권5호
• /
• pp.51-60
• /
• 2008

This study is to relate the bond characteristics of CFRP rebar in high strength concrete incorporated with silica fume(SF) and metakaolin(MK). An direct bond test were performed to evaluate the effect of SF and MK on bond properties of high-strength concrete and CFRP rebar. The high strength concrete mix included four SF and MK mixes with 0%, 5%, 10% and 15%. Results of bond performance experiment in relation to pullout vs slip behavior of FRP rebar and high strength showed better performance of SF than MK. Also, the results showed the improved bond strength as replacement ratio of SF and MK increased. The relative bond strength in which $1.3{\sim}3.2$ of estimated values were obtained.

• Structural Engineering and Mechanics
• /
• 제60권2호
• /
• pp.301-312
• /
• 2016

In a concrete member under pure tension, the stress in concrete is uniformly distributed over the whole concrete section. It is supposed that a local bond failure occurs at each crack, and there is a relative slip between steel and surrounding concrete. The compatibility of deformation between the concrete and reinforcement is thus not maintained. The bond transfer length is a length of reinforcement adjacent to the crack where the compatibility of strain between the steel and concrete is not maintained because of partially bond breakdown and slip. It is an empirical measure of the bond characteristics of the reinforcement, incorporating bar diameter and surface characteristics such as texture. Based on results from a series of previously conducted long-term tests on eight restrained reinforced concrete slab specimens and material properties including creep and shrinkage of two concrete batches, the ratio of final bond transfer length after all shrinkage cracking, to THE initial bond transfer length is presented.

• 대한건축학회논문집:구조계
• /
• 제34권1호
• /
• pp.41-51
• /
• 2018

In case of evaluating the bond stress of a void deck plate using a wire steel, there is no standard formula considering both the influence on the void and the type of the reinforcing bar. Therefore we proposed a model equation considered the bond characteristics of the void deck plate. A total of 46 specimens was carried out a direct pull-out test and the test variables were the presence of a void body, type of reinforcing bar, the inner cover thickness according to the location of reinforcing bars and bond region. As a result of the comparison between the steel bar and steel wire, the bond stress of the steel wire with the relative rib area of 0.071 is 4.5 ~ 28.58% lower than that of the steel bar with 0.092 and the bond stress reduction rate increases when the inner cover thickness is insufficient. In the case of the inner cover thickness of $1.7d_b$ and $2.7d_b$, the bond stress was reduced to 48.7 ~ 68.4%. In the inner cover thickness was $4.9d_b$ and $5.2d_b$, the bond stresses were equivalent to those of the solid specimens. It was confirmed that the average bond stress and strain were affected by the inner cover thickness. Therefore the predicted model for one module of the void deck plate is proposed and verified by considering the bond characteristics of the void deck plate.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.319-324
• /
• 1994

Bond test was carried out to assess the effect of several variables on bond characteristics between reinforcing bar and concrete. Key variables are concrete compressive strength(low, medium high, and ultra-high), bar diameter(13mm and 22mm), and concrete cover(25mm; 1-inch, 38mm; 1.5-inch, and 51mm; 2-inch). Confining effect and bar spacing are not taken into account. Thirty-two specimens subjected to uniaxial tension were tested under hypothesis uniform bond stress distribution along the reinforcing bar embeded in concrete. Test results(ultimate bond stress) were compared with bond and development provisions of the ACI building Code(ACl 318-89) and local bond stress versus slip relationship diagram represented to show effect of the above variables.

• 한국도로학회논문집
• /
• 제15권4호
• /
• pp.1-9
• /
• 2013

PURPOSES : Bonded concrete overlay is a favorable maintenance method since the material properties are similar to existing concrete pavements. In addition, bonded concrete overlay has advantage of structural performance since the overlay layer and the existing pavement perform as a monolithic layer. It is important to have suitable bond strength criteria to secure the performance of bonded concrete overlay. This study aimed to investigate the factors influencing bond strength characteristics between existing concrete pavement and overlay material. METHODS: Bond strength between overlay and existing pavement are measured and analyzed for various conditions such as the type of overlay materials, compressive and flexure strength of overlay and existing pavement, and deterioration status of existing pavement. RESULTS: The strength of overlay material does not significantly influence the bond strength. The overlay of ultra-rapid hardening cement generally gives low bond strength. However, ultra rapid hardening polymer modified concrete gives robust bond strength. The deterioration of existing concrete significantly decrease the bond strength. CONCLUSIONS: Bond strength of bonded concrete overlay highly depends on condition of existing concrete pavement rather than overlay material.

• 대한토목학회논문집
• /
• 제31권4A호
• /
• pp.279-286
• /
• 2011

FRP 긴장재는 PS 강연선의 부식 문제를 해결하기 위한 대안으로써 사용될 수 있으며, FRP 긴장재의 재료특성(부착강도, 인장강도, 전달길이 등)은 구조물에 적용하기 위해서 결정되어야 한다. 재료특성 중에 부착은 FRP 긴장재로 긴장된 PSC 구조물에 적용하기 위해 명확하게 요구되어야 한다. 이 연구는 다양한 표면형상을 갖는 FRP 보강재의 부착특성을 연구하였다. 콘크리트의 철근과 강연선 대신에 사용되는 FRP 재료의 부착특성을 결정하기 위해 CAN/CSA S806-02에서 제안된 직접인발 시험을 수행하였다. 강연선, 이형 철근, 6가지 다른 표면 형상을 갖는 탄소 또는 유리섬유 FRP 보강재에 대하여 총 40개의 시편이 제작되었다. 부착실험 결과 각 실험체의 다양한 부착응력-슬립 곡선을 나타냈고, 국내에서 제작된 CFRP 긴장재의 부착특성과 비교하였다.

• 농촌계획
• /
• 제14권1호
• /
• pp.1-7
• /
• 2008

Recently, brick pavement were widely introduced on the pavement in rural area. A variety of vision effects can be created from patterns of brick pavement. However, in most of brick pavement works, human psychological characteristics were not concerned. The purpose of this research was to discover psychological effect on brick pavement pattern. The results of the research can be summarized as follows: 1)Psychological impression on brick pavement pattern is similar among man and woman groups. 2)Stack bond and running bond pattern have a simple, relaxed, organized, and comfortable psychological characteristics. Basket weave & stack bond pattern has a simple and organized psychological characteristic. Herringbone bond pattern has a complex, dislike and uncomfortable psychological characteristic. Pinwheel bond pattern has a highly complex psychological characteristic. Basket weave and Basket weave variation bond pattern have a common psychological characteristic. 3)Employment of brick pavement pattern on this research is not highly preferred, hence it is necessary to develop a brick pavement patterns that have human psychological characteristics be concerned.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.225-228
• /
• 2006

To clarify the one body behavior of reinforcing bar and concrete, it is important to investigate bond characteristics between two materials. Bond strength is decided by applied force and interface area between reinforcing bar and concrete. And, the resultant force of chemical adhesive force, frictional force, and mechanical interaction are to be main factors. Property of concrete influences on chemical adhesive force and frictional force; bond strength is decreased by corrosion of reinforcing bar, as the result, durability is also decreased. In this study, to confirm bond characteristics with property of concrete, w/c ratio and blending of mineral admixture were selected as the main test parameters. The results obtained from this study will be used as the basic data for bond characteristics with corrosion.