• 대한전기학회논문지
• /
• 제39권10호
• /
• pp.1075-1085
• /
• 1990

This paper presents a new method for the optimal control of the distributed parameter systems by a decentralized computational procedure. Approximate lumped parameter models are derived by using the Galerkin method employing the Legendre polynomials as the basis functions. The distributed parameter systems, however, are transformed into the large scale lumped parameter models. And thus, the decentralized control scheme is introduced to determine the optimal control inputs for the obtained lumped parameter models. In addition, an approach to block pulse functions is applied to solve the optimal control problems of the obtained lumped parameter models. The proposed method is simple and efficient in computation for the optimal control of distributed paramter systems. Illustrative examples given to demonstrate the validity of the presently proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.657-665
• /
• 1991

Although orthogonal function is introduced in control theory in early 1970's, it is not perfect. Since the concept of integral operator by Chen and Hsiao in mid 1970's, orthogonal function (for example Walsh, Block-pulse, Haar, Laguerre, Legendre, Chebychev etc) has been widely applied In system's analysis and identification, model reduction, state estimation, optimal control, signal processing, image processing, EEG, and ECG etc. The reason why Walsh Functions introduces in control theory is that as integral of Walsh function is also developed in Walsh orthogonal function, if we transfer give system into integral equation and introduce Walsh function. We can know that system's characteristic by algebraical expression. This approach is based on least square error and that result is expressed as computer calculation and partly continuous constant value which is easy to apply. Such a Walsh function has been actively studied in USA, TAIWAN, INDO, CHINA, EUROPE etc and in domestic, author has studied it for 10 years since it was is introduced in 1982. This paper is consider the that author has studied for 10 years and Walsh function's efficiency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.357-360
• /
• 1991

In this paper, we have introduced a network and showed how this can be realised as an adaptive equalizer. The walsh equlizer is built from a set of Walsh-Block pulse functions and LMS algorithms with the optimal convergence factor(C.F.). The convergence and the adaptation speed of this algorithms depends on the proper choice of a design factor $\mu$ called the C.F.. Conventional adaptation techniques use the fixed time constant C.F. by the method of trial and error. In this paper, we propose to adaptive C.F. which are optimally tailored to adapt C.F. in real time so that their values are kept optimum for a new set of input variables.

• 전자공학회논문지B
• /
• 제33B권3호
• /
• pp.1-8
• /
• 1996

This paper proposes a novel transversal filter and an optimal LMS algorithm, and show how these can be realized as an adaptive equalizer. The transversal filter consists of a walsh and block pulse functions. in the LMS algorithm with equalizers, the convergence factor is an improtant design parameter because it governs stability and convergence speed. The conventional adaptation techniques use a fixed time constant convergence factor by the trial and error method. In this paper, an optimal method in the choice of the convergence factor is proposed. The proposed algorithm is obtrained that is tailored for each filter tap and is updated at each iteration. The performance of the proposed algorithm is compared iwth those of the conventional TDL and DFT equalizers by computer simulations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.83-86
• /
• 2002

This paper presents an implementation of Pill controller for DC-DC converter using the microcontroller. The features of the microcontroller such as the on chip ADC and Pulse width Modulator (PWM) eliminate the external components needed to perform these functions. The duty rate cycle for the DC-DC converter can be updated every time when the (ADC) conversation and the calculation time are finished. The stable response can be obtained for any kind of DC-DC converters. The SMPS controller looks at the converter output, compares the output to a set point, performs a control algorithm (Pill algorithm) and finally applies the algorithm output to the PWM. PWM output is then used to drive the DC-DC converter. Figure (1) shows a simplified block diagram of a complete DC-DC converter system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2627-2629
• /
• 2000

This paper introduces the design of a reduced order observer with unknown inputs for the purpose of fault detection and isolation(FDI) in a class of bilinear systems. To Analyze the observer and FDI, this paper uses BPF(block-pulse functions). The operational properties of BPF are much applied to the analysis of bilinear systems. The integral operational matrix BPF converts the form of the differential equation into the algebraic problems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.781-783
• /
• 1995

This paper presents a algorithm of hierarchical approach to tracking problems for high order systems via BPF. In controlling the n-th oder systems for tracking problem, TPBVP has the 2n-th order. Generally, it is very difficult to otain the solutions due to its high order. In order to solve this fact, hierarchical approach is applied. And using the BPF Transformation, we simply obtained the solutions of decomposed low order TPBVP from the recursive algebraic equations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.667-669
• /
• 1995

This paper presents a method to design Kalman filter on continuous stochastic dynamical systems via BPFT(block pulse functions transformation). When we design Kalman filter, minimum error valiance matrix is appeared as a form of nonlinear matrix differential equations. Such equations are very difficult to obtain the solutions. Therefore, in this paper, we simply obtain the solutions of nonlinear matrix differential equations from recursive algebraic equations using BPFT. We believe that the presented method is very attractive and proper for the evaluation of Kalman gain on continuous stochastic dynamical systems.

• 호남수학학술지
• /
• 제43권3호
• /
• pp.373-383
• /
• 2021

In this study, a numerical method deals with the Chebyshev wavelet collocation and Adomian decomposition methods are proposed for solving Korteweg-de Vries equation. Integration of the Chebyshev wavelets operational matrices is derived. This problem is reduced to a system of non-linear algebraic equations by using their operational matrix. Thus, it becomes easier to solve KdV problem. The error estimation for the Chebyshev wavelet collocation method and ADM is investigated. The proposed method's validity and accuracy are demonstrated by numerical results. When the exact and approximate solutions are compared, for non-linear or linear partial differential equations, the Chebyshev wavelet collocation method is shown to be acceptable, efficient and accurate.

• 한국통신학회논문지
• /
• 제35권12B호
• /
• pp.1175-1182
• /
• 2010

본 논문에서는 항공기와 지상국 사이의 방위정보와 거리를 측정하는 전술항공운행 장비인 TACAN(tactical air navigation)을 위한 디지털 회로를 FPGA로 구현하였다. TACAN의 신호처리를 위한 모든 기능을 하나의 FPGA에 집적하여 구현하였다. 제안한 하드웨어는 입력 인터페이스, 레지스터 파일, 디코더, 신호 발생기, 그리고 주 제어기로 구성된다. 구현한 하드웨어는 TACAN이 요구하는 방위정보를 위한 펄스쌍 그룹을 생성하는 기능과 거리를 측정하기 위한 항공기 응답 기능을 모두 포함하고 있고, 그 밖에 지상국의 ID를 제공하는 기능 등을 모두 포함하였다. 제안한 하드웨어는 ALTERA의 FPGA를 이용하여 구현하였고, 7,071개의 logic element를 사용한다.