• The Journal of Advanced Prosthodontics
• /
• 제1권1호
• /
• pp.19-25
• /
• 2009

STATEMENT OF PROBLEM. Primary stability at the time of implant placement is related to the level of primary bone contact. The level of bone contact with implant is affected by thread design, surgical procedure and bone quality, etc. PURPOSE. The aim of this study was to compare the initial stability of the various taper implants according to the thread designs, half of which were engaged to inferior cortical wall of type IV bone(Group 1) and the rest of which were not engaged to inferior cortical wall(Group 2) by measuring the implant stability quotient(ISQ) and the removal torque value(RTV). MATERIAL AND METHODS. In this study, 6 different implant fixtures with 10 mm length were installed. In order to simulate the sinus inferior wall of type IV bone, one side cortical bone of swine rib was removed. 6 different implants were installed in the same bone block following manufacturer s recommended procedures. Total 10 bone blocks were made for each group. The height of Group 1 bone block was 10 mm for engagement and that of group 2 was 13 mm. The initial stability was measured with ISQ value using Osstell $mentor^{(R)}$ and with removal torque using MGT50 torque gauge. RESULTS. In this study, we found the following results. 1. In Group 1 with fixtures engaged to the inferior cortical wall, there was no significant difference in RTV and ISQ value among the 6 types of implants. 2. In Group 2 with fixtures not engaged to the inferior cortical wall, there was significant difference in RTV and ISQ value among the 6 types of implants(P < .05). 3. There was significant difference in RTV and ISQ value according to whether fixtures were engaged to the inferior cortical wall or not(P < .05). 4. Under-drilling made RTV and ISQ value increase significantly in the NT implants which had lower RTV and ISQ value in Group 2(P < .05). CONCLUSIONS. Without being engaged to the inferior cortical wall fixtures had initial stability affected by implant types. Also in poor quality bone, under-drilling improved initial stability.

• 문화기술의 융합
• /
• 제9권3호
• /
• pp.633-640
• /
• 2023

본 연구는 운행선 경전철 직결식 궤도 부설구간에서 발생한 도상블록의 변위거동 특성을 분석하여 적정 보강 방안을 도출하고자 현장조사를 바탕으로 한 수치해석을 수행하였다. 본 연구의 대상선로는 교량상 급곡선 직결식 콘크리트 궤도로서 교량바닥판에 부설된 도상블록이 종방향 및 횡방향으로 이동하는 문제가 발생하여 이에 대한 메커니즘을 분석하였다. 본 연구에서는 3D Solid요소를 이용한 궤도구조 모델링을 바탕으로 운행하중 조건에서 발생가능한 직결식 궤도의 거동을 분석하고 다양한 보강방안에 대한 보강효과를 해석적으로 분석하였다. 도상블럭의 보강 전, 후 횡변위 분석결과, 극한 횡압 작용 시 보강 후 최대 횡변위는 보강 전 대비 약 3% 수준(약 0.1mm)으로 크게 감소하는 것으로 분석되었다. 또한 채움 모르타르, 교량 바닥판, 보강철근의 발생응력 검토결과, 모두 2.6 이상의 충분한 안전율을 확보하는 것으로 분석되어 보강방안에 대한 최적 조건을 도출하였다. 따라서 본 연구에서 검토한 앵커링 보강 수량 및 대칭형 앵커배치는 도상블록 횡방향 변위 발생 제어 및 교량, 도상블록의 구조적 건전성 확보에 효과적일것으로 판단된다.

• Journal of Korean Dental Science
• /
• 제3권1호
• /
• pp.25-31
• /
• 2010

This study sought to evaluate the effect of the type of grafts used in sinus lifting. A review of literature through MEDLINE search covering the period 1980 ~ 2006 was performed. After screening, this study was narrowed down to 2,452 patients receiving sinus lift grafts wherein 7,151 implants were placed. In this study, the types of grafts used in sinus augmentation were autogenous bone, allogenic bone, corticocancellous block bone, and various alloplastic materials. The success rate varied from 69% to 100% depending on the graft material type. The highest success rate was reported for the autogenous bone, with high success rates recorded for the most part in most studies.

• 대한전자공학회논문지SD
• /
• 제43권9호
• /
• pp.31-37
• /
• 2006

Low Density Parity Check (LDPC) code는 최근 그 우수한 성능으로 인하여 4세대 무선 이동 통신용 채널 코딩으로 주목받고 있다. 또한 유럽 디지털 위성 방송 규격인 DVB-S2는 LDPC 코드를 채널 코딩방식으로 채택하였다. 본 논문에서는 인코더와 디코더 양쪽 모두 효율적으로 하드웨어 구현이 가능한 hybrid H-matrix 구조를 이용한 DVB-S2 LDPC 복호기 구조를 제안한다. Hybrid H-matrix는 semi-random 방식과 partly parallel 방식을 결합하여 부호기와 복호기를 동시에 효율적으로 구현할 수 있다. 제안된 복호기 구조에서는 다양한 코드율에 사용되는 Variable Node processor Unit (VNU)을 재사용하기 위한 새로운 VNU와 최적화된 블록 메모리 배치 방법을 이용하였다. 제안된 구조를 이용하여 코드율 1/2의 DVB-S2 LDPC 복호기를 설계하였고 그 결과를 기존의 복호기와 비교하였다.

• The Korean Journal of Pain
• /
• 제28권2호
• /
• pp.122-128
• /
• 2015

Background: Caudal epidural injections have been commonly performed in patients with low back pain and radiculopathy. Although caudal injection has generally been accepted as a safe procedure, serious complications such as inadvertent intravascular injection and dural puncture can occur. The present prospective study was designed to investigate the influence of the depth of the inserted needle on the success rate of caudal epidural blocks. Methods: A total of 49 adults scheduled to receive caudal epidural injections were randomly divided into 2 groups: Group 1 to receive the caudal injection through a conventional method, i.e., caudal injection after advancement of the needle 1 cm into the sacral canal (n = 25), and Group 2 to receive the injection through a new method, i.e., injection right after penetrating the sacrococcygeal ligament (n = 24). Ultrasound was used to identify the sacral hiatus and to achieve accurate needle placement according to the allocated groups. Contrast dyed fluoroscopy was obtained to evaluate the epidural spread of injected materials and to monitor the possible complications. Results: The success rates of the caudal injections were 68.0% in Group 1 and 95.8% in Group 2 (P = 0.023). The incidences of intravascular injections were 24.0% in Group 1 and 0% in Group 2 (P = 0.022). No intrathecal injection was found in either of the two groups. Conclusions: The new caudal epidural injection technique tested in this study is a reliable alternative, with a higher success rate and lower risk of accidental intravascular injection than the conventional technique.

• 콘크리트학회논문집
• /
• 제11권6호
• /
• pp.3-12
• /
• 1999

The larger, loftier and more highly strengthened the recent structures become, the greater attention is paid to the problem of thermal crack occurrence associate with hydration heat. As one of methods to solve the problem, a care has been taken to the improvement of construction such as the application of pre-cooling or pipe-cooling, adjustment of concrete block size, concrete placement timing, joint arrangement and so on. But it is expected that a proper selection of cement shall additionally contribute to the control of thermal cracks. In this study, thus, we selected 4 types of cements such as Type V for anti-sulphate, blast furnace cements (slag content of 45% and 65% respectively)and ternary blended low heat cement, and carried out mock-up tests. In every assigned time, temperatures and thermal stresses were measured and calculated from raw data. As a result of measurement, it was found that the magnitude of hydration heat is in order of blast furnace slag cement. Type V and ternary blended low heat cement. Results of thermal stresses were same as the order of temperature. In addition, thermal stresses calculated from the data of strain gauges showed almost similar to those measured from effective stress gauges only when strain values were adjusted properly in accordance with initial time of stress appearance. Theoretical results agreed well with the measured values comparatively, but showed slight differences. It is inferred that these differences shall be reduced if more tests capable of evaluating thermal characteristics of concrete are carried out.

• Journal of Chest Surgery
• /
• 제31권6호
• /
• pp.610-614
• /
• 1998

12세된 여자 환자에서 한국에서는 처음으로 심장-폐 동시이식이 성공적으로 이루어 졌다. 환아는 심실 중격결손증이 없는 폐동맥 폐쇄증으로 좌폐부전과 함께 우심실의존성 관상동맥혈류를 가지고 있었으며 개심술에 의한 일반적인 심장 수술은 불가능하였다. 장기 제공자는 9세된 남아로 교통사고에 의한 뇌출혈이 사망의 원인이었다. 심장폐이식은 1997년 4월 20일 이루어 졌다. 이식시 수술 방법은 소위 아리조나 방법으로 양측 폐문부를 환아의 횡격막 신경위로 놓는 방법을 사용하였는데 수술시 지혈에 큰도움이 되었다. 수술후 환자는 두가지 큰 합병증이 발생하였는데 하나는 발열이고 둘째는 기관 문합부위 협착을 들수가 있다. 수술후에 계속되었던 발열은 결핵약 투여후 극적으로 소실되었으며 기관 협착에 의한 호흡 곤란은 수술후 제 71일째 실시한 금속성 그물망에 의한 확장으로 치유 되었다. 환자는 수술후 7개월째 호흡 곤란은 보이지 않고 있으며 운동 및 일상 생활에 지장이 없이 양호한 상태로 지내고 있다.

• Journal of Korean Neurosurgical Society
• /
• 제49권6호
• /
• pp.351-354
• /
• 2011

Objective : This investigation was conducted to evaluate a new, safe entry point for the C2 pedicle screw, determined using the anatomical landmarks of the C2 lateral mass, the lamina, and the isthmus of the pars interarticularis. Methods : Fifteen patients underwent bilateral C1 lateral mass-C2 pedicle screw fixation, combined with posterior wiring. The C2 pedicle screw was inserted at the entry point determined using the following method : 4 mm lateral to and 4 mm inferior to the transitional point (from the superior end line of the lamina to the isthmus of the pars interarticularis). After a small hole was made with a high-speed drill, the taper was inserted with a 30 degree convergence in the cephalad direction. Other surgical procedures were performed according to Harm's description. Preoperatively, careful evaluation was performed with a cervical X-ray for C1-C2 alignment, magnetic resonance imaging for spinal cord and ligamentous structures, and a contrast-enhanced 3-dimensional computed tomogram (3-D CT) for bony anatomy and the course of the vertebral artery. A 3-D CT was checked postoperatively to evaluate screw placement Results : Bone fusion was achieved in all 15 patients (100%) without screw violation into the spinal canal, vertebral artery injury, or hardware failure. Occipital neuralgia developed in one patient, but this subsided after a C2 ganglion block. Conclusion : C2 transpedicular screw fixation can be easily and safely performed using the entry point of the present study. However, careful preoperative radiographic evaluation, regardless of methods, is mandatory.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제39권4호
• /
• pp.156-160
• /
• 2013

Objectives: Interest in bone graft material has increased with regard to restoration in cases of bone defect around the implant. Autogenous tooth bone graft material was developed and commercialized in 2008. In this study, we evaluated the results of vertical and horizontal ridge augmentation with autogenous tooth bone graft material. Materials and Methods: This study targeted patients who had vertical or horizontal ridge augmentation using AutoBT from March 2009 to April 2010. We evaluated the age and gender of the subject patients, implant stability, adjunctive surgery, additional bone graft material and barrier membrane, post-operative complication, implant survival rate, and crestal bone loss. Results: We performed vertical and horizontal ridge augmentation using powder- or block-type autogenous tooth bone graft material, and implant placement was performed on nine patients (male: 7, female: 2). The average age of patients was $49.88{\pm}12.98$ years, and the post-operative follow-up period was $35{\pm}5.31$ months. Post-operative complications included wound dehiscence (one case), hematoma (one case), and implant osseointegration failure (one case; survival rate: 96%); however, there were no complications related to bone graft material, such as infection. Average marginal bone loss after one-year loading was $0.12{\pm}0.19$ mm. Therefore, excellent clinical results can be said to have been obtained. Conclusion: Excellent clinical results can be said to have been obtained with vertical and horizontal ridge augmentation using autogenous tooth bone graft material.

• 한국환경복원기술학회지
• /
• 제3권3호
• /
• pp.113-125
• /
• 2000

This study was carried out to introduce current status and development strategy for an environmental restoration of stream side in Japan, and to consider a methodology which could be effectively applied for the environmental restoration of stream side in Korea. The strategy prospects of environmental restoration in Japan were summarized as follows : 1. When we establish the long term erosion control planning, we should make detail planning after considering of a certain block of watershed units. Because most of the disaster is caused by soil movement which was occurred by water contents. 2. Nowadays, the general torrent erosion control planning system in Japan focused on reducing the sediment such as by placement of erosion control facility and by restoration of afforestation, after calculation of several factors including expected amount of sediment, and the different amount of planned sediment and allowable sediment. 3. In the past, the goal of forest conservation and erosion control planing was to fix the amount of soil movement by construction of permanent facilities. While, the goal of forest conservation and erosion control planning in the future needs to change the techniques to a small and middle scale's soil movement which could prevent soil movement from large scale of soil disasters, but allow soil movement effectively. Also, it is considered to change erosion control dams from non passing type to passing type. 4. Restoration of stream-side ecology, erosion control for the conservation of ecology should be planned and conducted cautiously based on concepts of ecology conservation and development of environmentally sound techniques.