• 한국항공운항학회지
• /
• 제14권3호
• /
• pp.16-22
• /
• 2006

The friction and wear of tire determined by frictional behavior of tire tread that translate driving force, cornering force and braking force between automobile and road as a result of frictional behavior of each tread block. The tire tread block is representative case of rubber block doing frictional behavior. In this paper, frictional behavior of rubber block under compressive force and shear force was analytically obtained by using slip starting position parameter instead of friction coefficient which is uncertain to express exact value between rubber and other surfaces yet. And local coefficients of friction were calculated as a function of compressive force, shear force, shear modulus of rubber, shape factor and slip starting position.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 춘계 학술발표회 논문집
• /
• pp.93-100
• /
• 2002

In this paper, new simple model is developed to evaluate the variation of the magnitude and the phase contrast of force components with the development of excess pore pressure in backfill soil. Also, Newmark sliding block analysis is performed inputting the calculated total force from new model. The applicability of new simple model and Newmark sliding block model is verified from the analyses of 1g shaking table test results.

• 한국대기환경학회지
• /
• 제16권2호
• /
• pp.165-178
• /
• 2000

In this study the effects of block distance have been investigated on the particle deposition efficiency in the collecting cell of two-stage electrostatic precipitator by numerical analysis. Particle trajectories have been changed by the electrostatic and inertial force of particle with the inlet velocity electrostatic number and particle diameter. The total deposition efficiency has a minimum value by the interaction between the effect of particle inertial force and electrostatic force in the collecting cell. The increase of block distance makes the total deposition efficiency decrease under the range of the particle size which has the minimum deposition efficiency. However beyond the range of particle size which has minimum deposition efficiency total deposition efficiency has no trend with the variation of block distance.

• 대한토목학회논문집
• /
• 제37권5호
• /
• pp.801-813
• /
• 2017

경사고임대의 지지블록에서 발휘되는 수동토압은 지반종류에 따라 발휘되는 토압이 다르다. 영구구조물인 옹벽 설계에서는 수동토압의 안전율을 고려하도록 하고 있으나, 가시설에 설치되는 경사고임대 지지블록에 작용하는 토압은 실제 발휘되는 수동측토압보다 과하게 산정되어 불안전측의 설계가 되고 있다. 본 연구에서는 3차원 수치해석(PLAXIS)을 이용 토사지반에서 경사고임대 지지블록에 발생되는 수동측토압을 산정하였다. 토사지반으로 연약지반과 풍화토지반이 선택되었다. 수치해석결과 각 지반에서 지지블록의 수평변위와 수동측토압 관계 곡선이 산정되었으며 이 곡선상의 항복점이 설계에 적용할 경사고임대 지지체에서의 저항력으로 연약지반에서는 Rankine 수동토압의 약 55.5%, 풍화토지반에서는 약 66%를 보는 것이 안정성 측면에서 바람직한 것으로 나타났다.

• 한국전산구조공학회논문집
• /
• 제25권5호
• /
• pp.375-380
• /
• 2012

본 연구에서는 선체 블록의 운반 작업 중 발생하는 동적 하중 및 골리앗 크레인의 와이어 로프(wire rope)와 선체 블록간의 동적 접촉력을 고려한 최적 러그 배치 시스템을 설계하고, 다물체계 동역학 커널과 외력 계산 커널을 개발하였다. 다물체계 동역학 커널은 recursive formulation을 이용하여 운동 방정식을 구성하였고, 외력 계산 커널은 비선형 유체 정역학적 힘, 선형 유체 동역학적 힘, 풍력, 계류력을 계산할 수 있다. 개발된 커널의 효용성을 검증하기 위해, 이를 이용하여 와이어 로프와 블록간의 간섭과 이때 작용하는 동적 접촉력을 계산하였고, 마지막으로 계산 결과를 반영하여 러그가 부착된 블록에 대한 구조 해석을 수행하였다.

• 한국해안·해양공학회논문집
• /
• 제33권3호
• /
• pp.131-138
• /
• 2021

소파블록은 제체의 보호와 파랑에너지 소산을 목적으로 사용되므로 피복된 블록의 안정성을 평가하는 것은 매우 중요하다. 소파블록의 안정성은 주로 수리모형실험으로부터 산정되는 안정계수를 통해 평가되어 왔다. 본 연구에서는 새로운 형태의 소파블록인 K-블록을 활용하여 블록의 맞물림 효과를 포함한 안정성 평가를 위해 인발력에 기반한 새로운 안정성 실험방법을 제시하였다. 소파블록의 인발 실험은 일정 경사면 소파블록을 설치하고 수직 및 수평 방향으로 인장력을 작용시켜 사면 상의 피복층으로부터 블록이 분리되는데 필요한 힘을 직접 계측하는 방법이다. 제안된 실험방법은 소파블록의 맞물림 효과를 정량적으로 평가할 수 있음을 확인하였으며, 맞물림 영향에 의한 단층 피복블록(K-블록)의 높은 안정성을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.748-750
• /
• 2004

The pantograph should supply the electrification equipments of a train with the current from the overhead catenary system over a broad range of speeds. For a high-speed electrical train, the dynamic interaction between the pantograph and the overhead catenary system causes the variation of the contact force. As the operational speed increases, the variation of the contact force increases. The contact force variation can cause contact losses, arcing and sparking. If the spark happens between the pantograph and the overhead catenary system, the EMI(electro magnetic interface) and noises may occur. After all, the quality of current collection is deteriorated. This paper deals with the dynamic characteristics analysis between pantograph and catenary system using block pulse function.

• Tribology and Lubricants
• /
• 제14권4호
• /
• pp.23-28
• /
• 1998

To increase the efficiency of the hydraulic axial piston pumps, it is need to know the various characteristics in the sliding contact parts of them. Especially, friction characteristics between the cylinder block and the valve plate in the hydraulic axial piston pumps plays an important role to high power density. In this paper, we tried to clarify friction characteristics between the cylinder block and the spherical valve plate in bent-axis-type axial piston pump in experimentally. Results are arranged as follow; (1) friction torque between the cylinder block and the spherical valve plate has a proportional relation to weight or rotational speed, and is strongly affected by temperature. (2) Friction torque strongly depends on force balance ratio in valve plate. (3) In this experiment, lubrication condition between the cylinder block and the spherical valve plate is under hydrodynamic lubrication.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.249-255
• /
• 1998

To increase the efficiency of the hydraulic axial piston pumps, we have to know the various characteristics in the sliding parts of them. Especially, friction characteristics between the cylinder block and the valve plate in the hydraulic axial piston pumps plays an important role to high power density. In this paper, we tried to clarify friction characteristics between the cylinder block and the spherical valve plate in bent-axis-type axial piston pump by using of modeling experiment. The main results of this study are these; (1) Friction torque between the cylinder block and the spherical valve plate has a proportional relation to weight or rotational speed, and is strongly affected by temperature. (2) Friction torque strongly depends on force balance ratio. (3) In this experiment, lubrication condition between the cylinder block and the spherical valve plate is under hydrodynamic lubrication.

• Computers and Concrete
• /
• 제24권5호
• /
• pp.423-436
• /
• 2019

Design equations to evaluate the bursting force in a post-tensioned anchorage zone have been introduced in many design codes, and one equation in AASHTO LRFD is widely used. However, this equation may not determine the bursting force exactly because it was designed on the basis of two-dimensional numerical analyses without considering various design parameters such as the duct hole and shape of the bearing plate. To improve the design equation, modification of the AASHTO LRFD design equation was considered. The behavior of the anchorage zone was investigated using three-dimensional linear elastic finite element analysis with design parameters such as bearing plate size and diameter of sheath hole. Upon the suggestion of a modified design equation for evaluating the bursting force in an anchorage block with a rectangular anchorage plate (Kim and Kwak 2018), additional influences of design parameters that could affect the evaluation of bursting force were investigated. An improved equation was introduced for determining the bursting force in an anchorage block with a circular anchorage plate, using the same procedure introduced in the design equation for an anchorage block with a rectangular anchorage plate. The validity of the introduced design equation was confirmed by comparison with AASHTO LRFD.