• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.5
• /
• pp.759-765
• /
• 2013

In this study, we investigated the quality characteristics of Sikhye, a traditional Korean drink, made with various amounts (0.5, 1, 2, and 3%) of powder from the roots of Doraji (RPD), for different storage periods (1, 3, 5, 7, 10, 13, or 15 days). The pH and Hunter's L value of Sikhye decreased with higher amounts of added RPD, while saccharinity as well as "a" and b values increased. During storage, pH and Hunter's L value of Sikhye tended to decrease while "a" and b values increased. The saccharinity of Sikhye with 0.5% and 1% RPD reached its maximum values on the tenth storage day and continuously decreased during the storage period. In contrast, the saccharinity of Sikhye with 2% and 3% RPD increased during the storage period, and had its maximum saccharinity on the fifteenth storage day. During the storage of Sikhye the total microbial cell count, typically $3.19{\sim}0.35{\times}10^2$ CFU/mL on the third storage day, was undetected in Sikhye with 3% RPD. The total microbial cell count of Sikhye without RPD increased to $1.91{\times}10^9$ CFU/mL by the fifteenth storage day, while Sikhye with 0.5, 1, 2, and 3% RPD added contained $8.43{\times}10^8$, $9.77{\times}10^7$, $2.10{\times}10^7$, and $7.21{\times}10^6$ CFU/mL, respectively. Thus, the total cell count was lower with higher additions of RPD. In sensory tests, the Sikhye control, or with 0.5% and 1% RPD added, didn't show significant differences in the texture of rice granules, plumpness of rice granules, floating of rice granules, taste, flavor, and sweetness values. The overall preference was highest (5.38) for Sikhye with 0.5% RPD, followed by the control, 1% RPD, 2% RPD and 3% RPD. In conclusion, according to preference tests, we recommended the addition of 0.5% or 1% RPD in Sikhye.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.1
• /
• pp.20-28
• /
• 2011

Crude polysaccharide (CP) was fractionated from the submerged culture (containing both mycelia and culture broth, SC) with Phellinus linteus (PL) in mushroom complete medium (MCM) supplemented with ginseng extract ($65^{\circ}$Bx, GE) to enhance the immune activity. PL-GE-15-CP from SC cultivated in MCM supplemented with GE-15% (v/v, a ratio of MCM volume to GE) showed significantly higher macrophage stimulation (1.45 fold of the saline control at $100{\mu}g$/mL) than PL-GE-5 and 10-CP with GE-5 and 10%, or PL-CP from SC without GE. The potent intestinal immune system modulating activity through Peyer's patch was also obtained by PL-GE-15-CP (1.46 fold). When PL-GE-15-CP further fractionated on DEAE-Sepharose CL-6B (Cl- form), PL-GE-15-CP-II was the significantly higher than others from PL-GE-15-CP or PL-CP on macrophage stimulation, interleukin (IL)-12 production and intestinal immune system modulation (1.54, 3.96 and 1.56 fold, respectively). PL-GE-15-CP-II also had higher anti-metastatic activity against colon 26-M3.1 carcinoma cell (57.3% inhibition of tumor control, $200{\mu}g$/mouse) rather than PL-CP-II. This active fraction (PL-GE-15-CP-II) mainly contained neutral sugar (82.45%) and uronic acid (12.99%), and component sugar analysis showed that PL-GE-15-CP-II consisted mainly of uronic acid, Ara, Man, Gal and Glc (molar ratio of 0.52:0.97:0.63:1.00:0.54). Furthermore, the activity of GE culture was higher compared with culture without GE, indicating that GE helped to enhance the immune activity of P. linteus; also, it is assumed that the polysaccharide plays an important role in immune enhancement.

• Restorative Dentistry and Endodontics
• /
• v.30 no.6
• /
• pp.450-460
• /
• 2005

The aim of this study was to evaluate the effect of cavity shape, bond quality of bonding agent and volume of resin composite on shrinkage stress developed at the cavity floor. This was done by measuring the shear bond strength with respect to iris materials (cavity shape , adhesive-coated dentin as a high C-factor and Teflon-coated metal as a low C-factor), bonding agents (bond quality: $Scotchbond^{TM}$ Multi-purpose and Xeno III) and iris hole diameters (volume; 1mm or 3mm in $diameter{\times}1.5mm$ in thickness). Ninety-six molars were randomly divided into 8 groups ($2{\times}2{\times}2$ experimental setup). In order to simulate a Class I cavity, shear bond strength was measured on the flat occlusal dentin surface with irises. The iris hole was filled with Z250 restorative resin composite in a bulk-filling manner. The data was analyzed using three-way ANOVA and the Tukey test. Fracture mode analysis was also done When the cavity had high C-factor, good bond quality and large volume, the bond strength decreased significantly The volume of resin composite restricted within the well-bonded cavity walls is also be suggested to be included in the concept of C-factor, as well as the cavity shape and bond quality. Since the bond quality and volume can exaggerate the effect of cavity shape on the shrinkage stress developed at the resin-dentin bond, resin composites must be filled in a method, which minimizes the volume that can increase the C-factor.

• Food Engineering Progress
• /
• v.21 no.2
• /
• pp.143-149
• /
• 2017

This study was carried out to investigate antimicrobial activity and characteristics of Asparagus cochinchinenesis which was steamed and fermented with lactic acid bacteria. A. cochinchinensis was prepared to steaming process which was washed and freeze dried. A. cochinchinensis was steamed at $95^{\circ}C$ for 12 h and dried by hot air at $50^{\circ}C$ for 24 h. After steaming process, A. cochinchinensis was fermented with lactic acid bacteria (Leuconostoc mesenteroides 4395, Lactobacillus sakei 383 and Lactobacillus plantarum KCCM 11322). Ethyl acetate extracts of fermented A. cochinchinensis had antimicrobial activities for the respiratory disease bacteria (Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa and Escherichia coli). A. cochinchinensis had highest antimicrobial activity for the P. aeruginosa which fermented with L. mesenteroides 4395. The minimum inhibition concentration (MIC) of A. cochinchinensis fermented with L. mesenteroides 4395 was 10 mg/mL for S. aureus, S. epidermidis, E. coli and 5 mg/mL for P. aeruginosa. The MIC of A. cochinchinensis fermented with L. sakei 383 and A. cochinchinensis fermented with L. plantarum KCCM 11322 were the same. Total sugar was decreased from $863.33{\pm}17.47mg/mL$ to $722.67{\pm}5.51mg/mL$ during the steaming process. But reducing sugar was increased from $99.36{\pm}1.32mg/mL$ to $109.29{\pm}2.71mg/mL$ during the steaming process. Total sugar was decreased to 301.50-361.42 mg/mL and reducing sugar was decreased to 27.39-62.20 mg/mL during the fermentation process.

• Microbiology and Biotechnology Letters
• /
• v.47 no.1
• /
• pp.132-138
• /
• 2019

Among several marine-derived microorganisms isolated from the coast of Jeju Island that had antimicrobial activity against fish disease pathogens, Bacillus subtilis MD-02 was tested for its dietary effect on the innate immune response and disease resistance of olive flounder. Strain MD-02 was fed to the olive flounder at a concentration of $1.2{\times}10^4$, $1.2{\times}10^6$, or $1.2{\times}10^8CFU/100g$, respectively. Consequently, the hematocrit was higher in these three groups than that in the control group at 4 weeks, and the aspartate aminotransferase and alanine aminotransferase levels were decreased in the $1.2{\times}10^8$ and $1.2{\times}10^4CFU/100$ groups compared with the control group levels. The amylase activity and total protein were significantly increased in the $1.2{\times}10^4CFU/100g$ group at 3 weeks. The innate immune response, determined from the lysozyme and macrophage activities, was higher in the $1.2{\times}10^8CFU/100g$ group than in the control group. In addition, treatment of the olive flounders with Streptococcus parauberis at $1.2{\times}10^6CFU/ml$ confirmed the mortality rate, which was 100% in the control group and 40-60% in the groups fed B. subtilis MD-02, indicating that the fish had resistance to fish disease pathogens. Therefore, it was confirmed that when fed MD-02, olive flounder builds an innate immune response and acquires resistance to fish disease pathogens, indicating that B. subtilis MD-02 can be developed as a beneficial feed additive.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.1
• /
• pp.1-9
• /
• 2019

The aim of this study was to compare the degree of conversion and polymerization shrinkage of low and high viscosity bulk-fill giomer-based and resin-based composites. Two bulk-fill giomer (Beautifil Bulk Restorative (BBR), Beautifil Bulk Flowable (BBF)), two bulk-fill (Tetric N-Ceram Bulk-fill (TBF), SureFil SDR flow (SDR)) and two conventional resin composites (Tetric N-Ceram (TN), Tetric N-flow (TF)) were selected for this study. The degree of conversion was measured by using Fourier transform infrared spectroscopy. Polymerization shrinkage was measured with the linometer. For all depth, BBR had the lowest degree of conversion and SDR had the highest. At 4 mm, the degree of conversion of low and high viscosity bulk-fill giomer resin composites was lower than that of bulk-fill resin composites (p < 0.05). At the depth between 2 mm and 4 mm, there were significant difference with TBF, TN and TF (p < 0.05), while no significant difference in the degree of conversion was measured for BBR, BBF and SDR. Polymerization shrinkage of six resin composites decreased in the following order: TF > SDR > BBF > TBF > TN and BBR (p < 0.05). Polymerization shrinkage of bulk-fill giomer resin composites was lower than that of bulk-fill resin composites (p < 0.05). From this study, it is found that the bulk-fill giomer resin composites and TBF were not sufficiently cured in 4 mm depth. The degree of conversion of low and high viscosity bulk-fill giomer resin composites was significantly lower than bulk-fill resin composites in both 2 mm and 4 mm depths. Therefore, such features of bulk-fill giomer resin composites should be carefully considered in clinical application.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.477-483
• /
• 2020

We constructed a stand yield table for Chamaecyparis obtusa based on data from an actual forest. The previous stand yield table had a number of disadvantages because it was based on actual forest information. In the present study we used data from more than 200 sampling plots in a stand of Chamaecyparis obtusa. The analysis included theestimation, recovery and prediction of the distribution of values for diameter at breast height (DBH), and the result is a valuable process for the preparation ofstand yield tables. The DBH distribution model uses a Weibull function, and the site index (base age: 30 years), the standard for assessing forest productivity, was derived using the Chapman-Richards formula. Several estimation formulas for the preparation of the stand yield table were considered for the fitness index, and the optimal formula was chosen. The analysis shows that the site index is in the range of 10 to 18 in the Chamaecyparis obtusa stand. The estimated stand volume of each sample plot was found to have an accuracy of 62%. According to the residuals analysis, the stands showed even distribution around zero, which indicates that the results are useful in the field. Comparing the table constructed in this study to the existing stand yield table, we found that our table yielded comparatively higher values for growth. This is probably because the existing analysis data used a small amount of research data that did not properly reflect. We hope that the stand yield table of Chamaecyparis obtusa, a representative species of southern regions, will be widely used for forest management. As these forests stabilize and growth progresses, we plan to construct an additional yield table applicable to the production of developed stands.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.4
• /
• pp.467-475
• /
• 2021

The purpose of this study was to compare the effect of sodium fluoride(NaF) varnish and potassium iodide(KI) on remineralization efficacy of silver diamine fluoride(SDF) by measuring microhardness and evaluating surface morphology by scanning electron microscope(SEM). Artificial caries lesions were induced on extracted primary molars and vickers microhardness was measured. Specimens were randomly separated into 4 groups for treatment. The specimens in group I were treated with SDF, group II with NaF varnish after SDF, group III with KI after SDF and group IV with distilled water. After 8 days of pH cycling, vickers microhardness was measured and difference before and after treatment was calculated. For SEM, 2 samples were evaluated respectively after enamel polishing, lesion formation and after pH cycling. Group III showed highest increase in microhardness. Group I showed higher increase in microhardness than Group II but without statistical difference. Group IV showed lowest increase in microhardness value among 4 groups. On SEM image, group I, II and III showed smoother and less irregular surface compared to group IV. Amorphous crystal pellicles were observed in group III. In conclusion, SDF, SDF and NaF, SDF and KI groups showed smoother surface and increase in microhardness suggesting the possibility that remineralization effect might take place in oral conditions. In addition, in limited conditions of this study, applying NaF varnish after SDF did not increase the remineralization efficacy of SDF while KI significantly increased the remineralization efficacy of SDF. However, additional study considering various conditions that might affect demineralization and remineralization in clinical situations need to be conducted.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.4
• /
• pp.379-391
• /
• 2022

The current study aimed to compare the pH, solubility value, and ion release capability of premixed mineral trioxide aggregates (MTAs) versus conventional pulp capping materials before and after setting. The following materials were used: resin-modified calcium silicate cement (TheraCal LC^®, TLC), resin-modified calcium hydroxide cement (Ultra-Blend^TM plus, UBP), and 2 kinds of premixed MTA (Endocem MTA^® premixed regular [EMPR] and Well-Root^TM PT [WRP]). The specimens of each material were prepared before and after setting and were immersed in distilled water. The materials' pH and solubility value were assessed. Next, three kinds of ion (calcium, sulfide, and strontium) released by pulp capping materials were evaluated via inductively coupled plasma atomic emission spectrometry. In the after-setting group, the pH of TLC and UBP decreased. However, the pH of the premixed MTAs increased with time. TLC released a higher concentration of strontium ion compared with the other materials. Meanwhile, EMPR released a significantly high concentration of sulfide ion (p < 0.05). In the after-setting group, the 2 kinds of premixed MTAs released a significantly higher concentration of calcium ion compared with the other materials (p < 0.05). In the after-setting group, EMPR had a significantly low solubility value (p < 0.05). The Kruskal-Wallis test, followed by the Mann-Whitney U test with Bonferroni correction, was used in statistical analysis. In conclusion, resin-modified calcium silicate cement, modified calcium hydroxide cement, and the 2 kinds of premixed MTAs had an alkaline pH and low solubility value and they released various concentrations of ions after setting.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.2
• /
• pp.205-216
• /
• 2023

This study aimed to compare the color stability and surface roughness of three-dimensional (3D) printing resin according to polishing methods. 3D-printed resin specimens were fabricated at TC-80DP (Graphy, Seoul, Korea) with a stereolithography 3D printer, and the specimens were divided into three groups, each of which was not polished, was polished using Enhance^®, and was polished using a Sof-Lex^TM disc. The CIE L^*a^*b^* value and the surface roughness of each group were measured and immersed in artificial saliva and orange juice after 0, 1, 7, 30, and 60 days, and the color difference (ΔE^*) was calculated. As a result of the study, no noticeable color change was observed in artificial saliva, but a noticeable color change was demonstrated in orange juice after 60 days of immersion, and the difference was significant. In the Sof-Lex^TM group, surface roughness according to the solution was found to be significantly higher in the orange juice than that in artificial saliva. No significant difference in color change was found according to the polishing method, but surface roughness was significantly lower in the Sof-Lex^TM group than both that of the unpolished group and that of the Enhance^® group. Nevertheless, all groups exhibited clinically acceptable properties regardless of their higher surface roughness than the threshold for plaque accumulation. Overall, this study recommends utilizing Sof-Lex^TM for polishing 3D printing resin when used in primary anterior tooth coverage.