• Ocean and Polar Research
• /
• v.41 no.1
• /
• pp.11-18
• /
• 2019

This acoustic experiment noted that fish species in Chilam-Gijang marine ranching area were more densely distributed in the pelagic zone during nighttime than daytime. In each season, the gill nets caught 15 different fish species and the estimated average target strengths were -44.0 dB and -44.4 dB for autumn and winter surveys, respectively. The estimated autumn fish biomass were 7.7 tons and 26.0 tons during daytime and nighttime, respectively. Winter biomass was 2.27 tons and 30.97 tons during daytime and nighttime, respectively. Different fish species form schools that exhibit different movements and behaviors, and thereby occupy varying water layers. These results explained the estimated fish biomass, and variation with seasons and time of the surveys around artificial reefs in Chilam Bay, Korea.

• Journal of Microbiology and Biotechnology
• /
• v.5 no.2
• /
• pp.114-116
• /
• 1995

Concentrated Brazillian sugar cane stillage was used as a substrate for the yeast biomass production using Candida rugosa isolated from East Africa. At the optimum stillage concentration of 10% dry matter, biomass production was 20.4 g/l and COD reduction rate was 41%. The specific growth rate of the yeast was 0.17 $h^{-1}$ and the corresponding productivity 0.91 g $l{-1} h^{-1}$ in the batch fermentation was observed at $40{\circ}^C$.

• KSBB Journal
• /
• v.25 no.6
• /
• pp.553-558
• /
• 2010

Increasing demands on fossil fuel have led to the unprecedented attraction to microalgal biofuel as an alternative energy. In this study, we investigated growth and lipid productions of microalga Nannochloris oculata under various carbon dioxide or nitrogen source concentrations and irradiance conditions. Biomass production of N. oculata was highest under 2% $CO_2$ with 0.3 flow rate (vvm). In addition, biomass productivities were proportional to the concentration of nitrogen source, whereas lipid biosynthesis was suppressed under higher nitrogen concentration (up to 50 mg/L). High irradiation ($160{\sim}180\;{\mu}mol/m^2{\cdot}s$) enhanced growth rate and lipid production of N. oculata.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.5
• /
• pp.1-14
• /
• 2010

Bio-ethanol is a promising alternative energy source for reducing both consumption of crude oil and environmental pollution from renewable resources like lignocellulosic biomass such as wood, forest residuals, agricultural leftovers and urban wastes. Based on current technologies, the cost of ethanol production from lignocellulosic materials is relatively high, and the main challenges are the low yield and high cost of the hydrolysis process. Development of more efficient pretreatment technology (physical, chemical, physico-chemical, and biological pretreatment), integration of several microbiological conversions into fewer reactors, and increasing ethanol production capacity may decrease specific investment for ethanol producing plants. The purpose of pretreatment of lignocellulosic material is to improve the accessible surface area of cellulose for hydrolytic enzymes and enhance the conversion of cellulose to glucose and finally high yield ethanol production which is economic and environmental friendly.

• Journal of Forest and Environmental Science
• /
• v.26 no.2
• /
• pp.137-148
• /
• 2010

The high costs for ethanol production with lignocellulosic biomass as a second generation energy materials currently deter commercialization of lignocellulosic biomass, especially wood biomass which is considered as the most recalcitrant material for enzymatic hydrolysis mainly due to the high lignified structure and the nature of the lignin component. Therefore, overcoming recalcitrance of lignocellulosic biomass for converting carbohydrates into sugar that can subsequently be converted into biobased fuels and biobased products is the primary technical and economic challenge for bioconversion process. This study was mainly reviewed on the research trend of the enhancement of enzymatic hydrolysis for lignocellulosic biomass after pretreatment in bioethanol production process.

• KSBB Journal
• /
• v.27 no.2
• /
• pp.97-102
• /
• 2012

In the present study, the biomass productivity of two green microalgae (Chlorella sp. and Dunaliella salina DCCBC2) were assessed in a 12 L tubular photobioreactor under optimum culture conditions. In the batch culture optimization process, the Chlorella sp. biomass was obtained as 1.2 g/L under atmospheric air as a sole $CO_2$ source and other culture conditions as follows: light intensity, temperature, pH, $NH_4Cl$ and $K_2HPO_4$ were 100 ${\mu}E/m^2/s$, $27^{\circ}C$, 7.0, 20.0 mM and 2.0 mM, respectively. On the other hand, 2.9 g/L of D. salina DCCBC2 biomass production was observed under the following conditions: light intensity, temperature, pH, $KNO_3$ and $K_2HPO_4$were 80 ${\mu}E/m^2/s$, $27^{\circ}C$, 8.0, 3.0 mM and 0.025 mM, respectively. At 1% $CO_2$ supply to the reactor, the Chlorella sp. production was reached 1.53 g/L with 25% increment under the same operating conditions. In addition, the maximum D. salina DCCBC2 biomass was observed as 3.40 g/L at 3% $CO_2$ concentration. Based on the aforementioned optimized conditions, the dilution rate and maximal biomass productivity of Chlorella sp. and D. salina DCCBC2 in the continuous cultivation were 0.4/d and 0.6 g/L/d and 0.6/d and 1.5 g/L/d, respectively.

• Journal of Korea Foresty Energy
• /
• v.18 no.1
• /
• pp.6-10
• /
• 1999

This study was conducted to examine biomass production and its allocation characteristics by the planting density for 12- year - old Pinus densiflora forma erecta Uyeki plantation located in Chilbo Experimental Forest of Seoul National University in Suwon, Kyonggj-do. Different sample trees were selected for harvest by the planting density as follows; six trees from 1.0m X 1.0m, five trees from 1.8m X 1.8m, four trees from 3.0m X 3.0m. Stem, previous year branches, current year branches, previous year needles and current year needles were weighed respectively with the stratified clipping method, and biomass production and its allocation characteristics were analyzed : (1) Total biomass of the above-ground was the highest at the planting density of 1.8m X l.8m and followed by 1.0m X l.0m. (2) The higher the planting density was, the lower the ratio of biomass in branches and needles. (3) As the planting density decreased, the moisture contents of stem and current year branches increased but those of needles and previous year branches decreased. (4) Maximum photosynthetic layer appeared in the upper portion of the tree at higher density plantation.

• Journal of Korean Society of Forest Science
• /
• v.71 no.1
• /
• pp.74-81
• /
• 1985

Dimension analysis was used to estimate biomass and net primary production(NPP) in a 36-year-old Japanese red pine (Pines densiflora S. et Z.) natural forest in Kangwondo. Best estimation was made by the equation model of $Wt=aD^bH^c$ where Wt is weight in kg, D is DBH in cm, and H is total tree height in m. Total aboveground biomass was estimated at 198.82 t/ha. Organic matter was distributed in the Japanese red pine stand as follows ; bolewood 68.8%, live branches 16.5%, bolebark 5.4%, foliage 4.6%, dead branches 3.7%, and cones 0.6%. Net primary production was estimated at 15.87 t/㏊/yr and was distributed: bolewood 44.5%, live branches 30.9%, foliage 14.1%, current twig 7.1%, and bolebark 3.3%. Leaf efficiency was estimated at 1.876. The power equation for biomass and IVPP yielded similar results as the results for Pines densiflora in Japan.

• Journal of Environmental Science International
• /
• v.29 no.2
• /
• pp.155-166
• /
• 2020

This study was conducted to analyze the current situation of the logging operation system and to suggest an effective policy plan to secure important raw materials for the use of forest biomass. The dissemination of forestry mechanization and the establishment of the logging operation are important tasks to establish a system and reduce costs of timber production by increasing the use of forest biomass; this includes increasing the supply of timber for domestic products and increasing the production of wood chips and wood pellets. In particular, the efficiency of steep-slopes catenary system machinery for yarding such as tower-yarder and swing-yarder should be urgently supplied to cope with forest production and supply of forest biomass energy resources. In addition, it is necessary to continuously promote the dissemination of high-performance forestry machinery as is being done in Japan. At the same time, instead of distributing or retaining the spread of forestry machinery to the state and local governments, it is necessary to distribute timber production work centered on forest cooperatives or private timber producers to be carried out by wood producers, forest cooperatives and individuals.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.12
• /
• pp.1944-1949
• /
• 2020

Mutant sugar transporter ScGAL2-N376F was overexpressed in Kluyveromyces marxianus for efficient utilization of xylose, which is one of the main components of cellulosic biomass. K. marxianus ScGal2_N376F, the ScGAL2-N376F-overexpressing strain, exhibited 47.04 g/l of xylose consumption and 26.55 g/l of xylitol production, as compared to the parental strain (24.68 g/l and 7.03 g/l, respectively) when xylose was used as the sole carbon source. When a mixture of glucose and xylose was used as the carbon source, xylose consumption and xylitol production rates were improved by 195% and 360%, respectively, by K. marxianus ScGal2_N376F. Moreover, the glucose consumption rate was improved by 27% as compared to that in the parental strain. Overexpression of both wild-type ScGAL2 and mutant ScGAL2-N376F showed 48% and 52% enhanced sugar consumption and ethanol production rates, respectively, when a mixture of glucose and galactose was used as the carbon source, which is the main component of marine biomass. As shown in this study, ScGAL2-N376F overexpression can be applied for the efficient production of biofuels or biochemicals from cellulosic or marine biomass.