• Korean Journal of Materials Research
• /
• v.13 no.7
• /
• pp.442-446
• /
• 2003

Tin dioxide ($SnO _2$) thin films were deposited at $375^{\circ}C$ on alumina substrate by metal-organic chemical vapor deposition. A few hillocks like a cauliflower were observed and the number of hillock on thin film surface increased with annealing temperature in air atmosphere. The oxygen content and the binding energy during air annealing at$ 500^{\circ}C$ came to close the stoichiometric $SnO_2$. The cauliflower hillocks seem to be the result of the continuous migration of the tiny grains to release the stress of an expanded grain. Sensitivity of CO gas depended on annealing temperature and increased with increasing annealing temperature.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.3
• /
• pp.301-306
• /
• 2004

Statement of problem. Fibronectin mediates its biological effects by binding to integrins on cell membranes through a consensus site including the Arg-Gly-Asp (RGD) sequence within tenth type III module. Purpose. The purpose of our study was to investigate the adsorption affinity of human recombinant fibronectin peptide (hFNIII 9-10) to titanium and to investigate the effect of the surrounding ionic composition on the adsorption process. Material and methods. As for evaluating the affinity of hFNIII 9-10 to Ti, titanium disks were incubated in 40, 80 and $120{\mu}g/ml$ hFNIII 9-10 solution at $37^{\circ}C$ overnight, repectively. As for evaluating the effect of surrounding ionic concentration, hFNIII 9-10 was dissolved in distilled water, phosphate buffered saline and RPMI 1640. Optical density (O.D.) was measured in ELISA reader. Results. The results were as follows; 1. The adsorption of hFNIII 9-10 showed significantly highest mean optical density (O.D.) value in $80{\mu}g/ml$. 2. The difference of ionic composition in DW, PBS and RPMI did not influence the adsorption amount of hFNIII 9-10.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.95-98
• /
• 2005

This paper proposes the solutions predicting the coefficient of the thermal expansion changes of composites which include the fiber-like shaped ($a_1$ > ($a_2$ = ($a_3$) and the disk-like shaped (al = a2> a3) inclusions like two dimensional geometries, which has one aspect ratios, ${\alpha}$ = ($a_1$ /($a_3$). The analysis follows the procedure developed for elastic moduli by using the generalized approach of Eshelby’s equivalent tensor. The influences of the aspect ratios, on the effective coefficient of thermal expansion of composites containing aligned isotropic inclusions are examined. This model should be limited to analyze the composites with unidirectionally aligned inclusions and with complete binding to each other of both matrix and inclusions having homogeneous properties. The coefficient of thermal expansion of composites (${\theta}_{11}$,${\theta}_{22}$and ${\theta}_{33}$) are investigated. From material data of the composites with glass fiber in epoxy resin, the thermal expansions along the aspect ratio were obtained and similar to the Chow model. The longitudinal coefficients of thermal expansion ${\theta}_{11}$decrease, as the aspect ratios increase. However, the transverse coefficients of thermal expansion ${\theta}_{22}$increase or decrease, as the aspect ratios increase. And both of them decrease, as the concentration increases.

• Molecules and Cells
• /
• v.40 no.12
• /
• pp.925-934
• /
• 2017

The Cdc6 protein is essential for the initiation of chromosomal replication and functions as a licensing factor to maintain chromosome integrity. During the S and G2 phases of the cell cycle, Cdc6 has been found to inhibit the recruitment of pericentriolar material (PCM) proteins to the centrosome and to suppress centrosome over-duplication. In this report, we analyzed the correlation between these two functions of Cdc6 at the centrosome. Cdc6 depletion increased the population of cells showing centrosome over-duplication and premature centrosome separation; Cdc6 expression reversed these changes. Deletion and fusion experiments revealed that the 18 amino acid residues (197-214) of Cdc6, which were fused to the Cdc6-centrosomal localization signal, suppressed centrosome over-duplication and premature centrosome separation. Cdc6 mutant proteins that showed defective ATP binding or hydrolysis did not exhibit a significant difference in suppressing centrosome over-duplication, compared to the wild type protein. In contrast to the Cdc6-mediated inhibition of PCM protein recruitment to the centrosome, the independence of Cdc6 on its ATPase activity for suppressing centrosome over-duplication, along with the difference between the Cdc6 protein regions participating in the two functions, suggested that Cdc6 controls centrosome duplication in a manner independent of its recruitment of PCM proteins to the centrosome.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.9
• /
• pp.787-792
• /
• 2015

Recently, 3D printing technology is a hot issue in various industrial fields. According to the user's application, it allows for the free form fabrication method to be utilized in a wide range. The powder based fusion technique is one of the 3D printing methods. When using this method it is possible to apply the various binder jetting techniques such as piezo, thermal bubble jet, dispenser and so on. In this paper, a multi thermal bubble ink jet was integrated for jetting of powder binding material and developing a power fused 3D printing system. For high quality 3D printing parts, it needs an analysis and evaluation of the behavior of the thermal bubble ink jet head. In the experiment, a correlation between jetting binder quantity and layer thickness of powder was investigated, and a 3D part model was fabricated, which was used by measuring the scale factor.

• Journal of Sensor Science and Technology
• /
• v.20 no.6
• /
• pp.400-405
• /
• 2011

This study introduced the development of a strip type disposable enzyme-linked immunosensor platform for the detection of IgG. Strips of the strip sensor were fabricated by using commercial nitrocellulose filter membranes and a housing holder for the strips was manufactured by using a standard injection molding process for a plastic material. An IgG-urease conjugate was prepared and used for the competitive immune-binding with sample IgG. From the enzymatic reaction between the conjugated urease and urea added, ammonia was generated and caused a localized alkaline pH change on the immobilized antibody band which was coated onto the sensor strips. This pH increase subsequently caused a color change of the antibody band in the presence of a pH indicator, phenol red. Used in conjunction with a competitive immunoassay format, the intensity of the color produced is directly linked with the concentration of target analyte, IgG, and specific measurement of IgG in a lateral flow immunoassay format was achieved over the range 100 ppb to 2000 ppb IgG.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.3
• /
• pp.86-92
• /
• 2002

In this study, experiments were carried out to investigate the characteristics of grinding and wear process of diamond wheel far ceramic materials. Normal component of grinding resistance of $Al_2$O$_3$ was less then that of $Si_3 N_4$ and $ZrO_2$. This seems to be the characteristics of ceramic tools on work pieces both of high hardness. For the case of $Si_3 N_4$ and $ZrO_2$, as the mesh number of wheel increases, the surface roughness decreases. For the case of $Al_2 O_3$, the surface roughness does not decreases. Specific binding energy decreases as the material removal rate per unit time increases. For the case of $Si_3 N_4$ and $ZrO_2$, grinding is carried out by abrasive wear processes. For the case of $Al_2 O_3$, grinding is carried out by grain shedding process due to brittle fracture.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.1
• /
• pp.102-108
• /
• 2006

Microbial transglutaminase (MTGase) was investigated to determine whether it was an effective binding agent for the processing of low-quality pork loins. MTGase especially promoted the coagulation of myosin heavy chain (MHC). However, the effect of MTGase on MHC from low-quality meat was less than that from the normal meat when the reaction time was not enough. The breaking strength of the heat-induced gel made of myosin B from low-quality meat with MTGase was lower than that of normal meat. Sausage made with low-quality meat with MTGase did not exhibit improved hardness, as compared to that made with normal meat. Results of this study indicated that use of low-quality meat in the manufacture of sausage was feasible to get textural property equal to that of normal meat sausage, when a half or more of the raw material was normal meat and MTGase was used in the sausage.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.297.2-297.2
• /
• 2014

Strong exciton-photon coupling in microcavities have generated an intense research effort since quasiparticles called exciton polaritons are produced and shows interesting phenomena. Most of studies have been done with GaAs based microcavities at cryogenic temperature. Recently, GaN material which has large exciton binding energy and oscillator strength has much attention because strong coupling between photon and exciton could be realized at room temperature. However, fabrication of high quality microcavity using GaN is challengeable due to the large mismatch between the lattice and the thermal expansion coefficient in GaN based distributed Bragg mirror. Here, we observed strong coupling regime of exciton-photon in GaN micro-rods which were grown by metalorganic vapour phase epitaxy (MOCVD) on Si substrate. Owing to the hexagonal cross-section of micro-rod, whispering gallery modes of photon are naturally formed and could be coupled with exciton in GaN. Using angle-resolved micro-photoluminescence measurement, exciton polariton dispersion curves were directly observed from GaN micro-rod. We expect room temperature exciton polariton condensation could be realized in high quality GaN micro-rod.

• Preventive Nutrition and Food Science
• /
• v.9 no.1
• /
• pp.29-33
• /
• 2004

Cranberries have long been used by lay people to relieve the symptoms of urinary tract infections. Recent research has determined that the component of cranberry called proanthocyanidin (PAC) is the primary mechanism for inhibiting P-fimbriated E.coli adhesion to uroepithelial cells in vitro. A series of experiments were performed to determine the effects of PAC on growth and adhesion of uropathogenic E. coli and Staphylococcus aureus to urinary catheter material. The results showed that PAC-inhibited binding of Gram positive S. aureus to collagen coated surfaces and significantly decreased the growth of these bacteria. P-fimbriated E.coli did not bind well to the biomaterial and their growth was unaffected by the cranberry extract with the exception of some loss in viability at 1000 $\mu\textrm{g}$/mL after 5 to 18 hours of exposure. This is the first report of the potential for cranberries to interfere with the adhesion and growth of S. aureus, a multi-drug resistant organisms responsible for morbidity and mortality especially in hospitalized patients.