1 |
Lee, W. H., Kim, J. S., Kim, D. S., and Lee, M. C., "Three Dimensional Printing Process Using Inkjet Technology," J. Korean Soc. Precis. Eng., Vol. 23, No. 8, pp. 33-38, 2006.
|
2 |
Lee, W. H., Kim, D. S., Lee, M. C., and Kim, J. S., "A Study on the Development of SFF System Based on 3DP Process," J. Korean Soc. Precis. Eng., Vol. 23, No. 7, pp. 168-176, 2006.
|
3 |
Williams, P. A., "Three Dimensional Printing: A New Process to Fabricate Prototypes Directly from CAD Models," M.S. Thesis, Department of Mechanical Engineering, Massachusetts Institute of Technology, 1990.
|
4 |
Charnnarong, J., "The Drying Shrinkage in Three- Dimensional Printing and Its Dependence on the Properties of the powder and the Binder," Ph.D. Thesis, Department of Mechanical Engineering, Massachusetts Institute of Technology, 1996.
|
5 |
Wohlers, T., "Wohlers Report 2003," Wohlers Associates, pp. 13-16, 2003.
|
6 |
Tseng, F. G, "A Micro Droplet Injector System," Ph.D. Thesis, University of California, Los Angeles, 1998.
|
7 |
Chen, P.-H., Chen, W.-C., Ding, P.-P., and Chang, S., "Droplet Formation of a Thermal Sideshooter Inkjet Printhead," International Journal of Heat and Fluid Flow, Vol. 19, No. 4, pp. 382-390, 1998.
DOI
|
8 |
Kang, T. G, "Droplet Volume Adjustable Microinjectors Using Digital Microheater Array," Ph.D. Thesis, Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, 2005.
|