• Proceedings of KOSOMES biannual meeting
• /
• 2004.05b
• /
• pp.107-112
• /
• 2004

In order to improve the safety r! ship berthing and the efficiency r! berth operation in the harbour, the berthing energy acting on a ship in berthing maneuver need to be estimated properly. The berthing energy is used as one q the criteria to determine the maximum permissible load of fender as well as important factors to establish the berthing speed and the required power r! tug-beat for pilot and ship operator. In this study, some problems r! present the method of berthing energy are discussed on the basis of the hydrodynamic aspects. Then, series calculations of berthing energy are carried out considering the effect of water depth on added mass and the ship shape for container series from 1,600TEU to 12,000TEU.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.6
• /
• pp.56-64
• /
• 2013

Crabbing motion is the pure sway motion of a ship without surge velocity. Thus, it can be applied to a berthing operation. Crabbing motion is induced by a peculiar operation method called the push-pull mode. The push-pull mode is induced by using a combination of the main propeller and side thruster. Two propellers generating the same amounts of thrust and rotating in opposite directions produce some yawing moment on a vessel but do not induce longitudinal motion. With the additional operation of side thrusters, the push-pull mode is used to induce a large amount of lateral force. In this paper, three-degree-of-freedom equations of motion such as for the surge, sway, and yaw are constructed for the crabbing motion. Based on these equations of motion, a feedback linearization control method is applied to auto-berthing control for a twin-screw ship with side thrusters. The controller can deal with the nonlinearity of a system, which is present in the berthing maneuver of a twin screw ship. A simulation of the auto-berthing of a ship is performed to validate the performance of the designed controller.

• Journal of Mechanical Science and Technology
• /
• v.18 no.7
• /
• pp.1196-1202
• /
• 2004

To evaluate the unsteady motion in laterally berthing maneuver, it is necessary to estimate clearly the magnitudes and properties of hydrodynamic forces acting on ship hull in shallow water. A numerical simulation has been performed to investigate quantitatively the hydrodynamic force according to water depth for Wigley model using the CFD (Computational Fluid Dynamics) technique. By comparing the computational results with the experimental ones, the validity of the CFD method was verified. The numerical solutions successfully captured some features of transient flow around the berthing ship. The transitional lateral force in a state ranging from the rest to the uniform motion is modeled by using the concept of circulation.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.673-678
• /
• 2005

In order to improve the safety of ship berthing and the efficiency of berth operation in the harbour, the berthing energy acting on a ship in berthing maneuver need to be estimated properly. The berthing energy is used as one of the criteria to determine the maximum permissible load q{ fender as well as important factors to establish the berthing speed and the required power of tug-boat for pilot and ship operator. Some problems of berthing energy are discussed on the basis of the hydrodynamic aspects. Then, series calculations of berthing energy are carried out considering the effect of water depth on added mass and the ship shape for container series from 1,600TEU to 12,000TEU.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.4
• /
• pp.304-308
• /
• 2007

This paper deals with ANN(Artificial Neural Networks) and its application to automatic ship berthing. Due to the characteristic of ship's manoeuvre comparing with other moving objects on land, it has been known that the automatic control for ship's berthing cannot cope with various berthing situations such as various port shape and approaching directions. for these reasons. the study on automatic berthing using ANN usually have been carried out based on one port shape and predetermined approaching direction. In this paper, new algorithm with ANN controller was suggested to cope with these problems. Under newly suggested algorithm, the controller can select appropriate weights on the link of neural networks according to various situations. so the ship can maintain stable berthing operation even in different situations. Numerical simulations are carried out with this control system to find its improvement.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.2
• /
• pp.347-360
• /
• 2014

The auto-berthing of a ship requires excellent control for safe accomplishment. Crabbing, which is the pure sway motion of a ship without surge velocity, can be used for this purpose. Crabbing is induced by a peculiar operation procedure known as the push-pull mode. When a ship is in the push-pull mode, an interacting force is induced by complex turbulent flow around the ship generated by the propellers and side thrusters. In this paper, three degrees of freedom equations of the motions of crabbing are derived. The equations are used to apply the adaptive backstepping control method to the auto-berthing controller of a cruise ship. The controller is capable of handling the system non-linearity and uncertainty of the berthing process. A control allocation algorithm for a ship equipped with two propellers and two side thrusters is also developed, the performance of which is validated by simulation of auto-berthing.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.3
• /
• pp.199-210
• /
• 2012

The recent researches on the automatic berthing control problems have used various kinds of tools as a control method such as expert system, fuzzy logic controllers and artificial neural network (ANN). Among them, ANN has proved to be one of the most effective and attractive options. In a marine context, the berthing maneuver is a complicated procedure in which both human experience and intensive control operations are involved. Nowadays, in most cases of berthing operation, auxiliary devices are used to make the schedule safer and faster but none of above researches has taken into account. In this study, ANN is applied to design the controllers for automatic ship berthing using assistant devices such as bow thruster and tug. Using back-propagation algorithm, we trained ANN with set of teaching data to get a minimal error between output values and desired values of four control outputs including rudder, propeller revolution, bow thruster and tug. Then, computer simulations of automatic berthing were carried out to verify the effectiveness of the system. The results of the simulations showed good performance for the proposed berthing control system.

• IE interfaces
• /
• v.11 no.1
• /
• pp.97-103
• /
• 1998

In these days many people have studied on the berthing problem. The operation rules differ from port so port and the problem is highly dependent on the environment of port. The purpose of this study is to develop a decision support system decision makers of the berthing problem for Inchon Port. The system is developed with graphic user interface(GUI) using user-interactive approach and some general and specific rules for Inchon Prot are considered. The system is composed of the following four parts ; the input/output part, the automatic berthing part by the system using rules, the manual berthing part by user, and the part for modifying results or handling exceptional events. The system is designed to assign ship to berths by matching the characteristics with environmental and operational constraints of Inchon Port. We expect that this system can provide decision makers with an efficient and fast way to berthing and can reduce wastes of time, space, and manpower in port operations.

• Journal of Navigation and Port Research
• /
• v.43 no.3
• /
• pp.186-196
• /
• 2019

Berthing energy is majorly influenced by the berthing velocity. It is necessary to design an appropriate berthing velocity for each pier, since excessive berthing velocity can cause berthing accident causing damage to the ship and pier. In this study, as a statistical approach for berthing velocity, the probability distributions suitable for the berthing velocities were confirmed using the K-S test, the A-D test and the Q-Q plot. As a result, the frequency distribution of the berthing velocity was found to be suitable using the Weibull distribution as well as the lognormal distribution. Additionally, the predicted values obtained through estimation of the berthing velocity using the concept of probability of exceedance in this study is proposed as a reference of design berthing velocity. It can be observed that the design berthing velocity is set to be somewhat low so that it does not practically match with the reality. This study and its results can be expected to contribute to the development of a proper design velocity calculation method.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.06a
• /
• pp.15-16
• /
• 2014

As trade cross the world is increasing these days, safe and effective management of harbour system is becoming important issue. With this background, the development of automatic time-domain simulation programme for ship berthing operation has been being peformed and PD (Proportional Derivative) controller has been used to control the speed and the heading angle of ships. This paper provides feasibility study for developing the time-domain simulation programme for berthing operation of ships with analysing advantages and drawbacks of the two different mathematical models, one is for low advance speed of ships by Kose (1984) and the other is MMG model for normal advance speed, through the simulations with various initial heading angles and positions of the ship.