• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.313-316
• /
• 2006

As Decentralized Generation(DG) becomes more reliable and economically feasible, it is expected that a higher application of DG units would be interconnected to the existing grids. This new market penetration of DG technologies is linked to a large number of factors like technologies costs and performances, interconnection issues, safety, market regulations, environmental issues or grid connection constrains. Korea Electric Power Corporation (KEPCO) has researched performance characteristics of the 60k W class 1) basic start-up & shutdown operation analysis 2) interconnection test 3) MGT -absorption chiller-heater system in the local condition. Variations of heat recovery from exhaust gas has measured according to micro gas turbine output of 15, 30, 45, 60kW. From those results, the performance of the MGT-absorption chiller/heater system has been evaluated. The suggested strategy and experience for the evaluation of the distributed generation will be used for the introduction of other distributed generation technologies into the grid in the future.

• Fashion & Textile Research Journal
• /
• v.11 no.1
• /
• pp.147-155
• /
• 2009

This study has been made to examine the basic information, the preferences of material quality, and the demand performance of clothing for underwear materials between atopic patients and non-patients. The measurement tool was a questionnaire. For statistical analysis of data, crosstabs, ${\chi}^2$-test, t-test and ANOVA through SPSS for Windows(version 14.0) were used. The results obtained are as follows. The degree of the basic knowledge about clothing materials indicated that women was higher than men. The material decision method and the most considering part in case of selecting underwear products showed difference between men and women. The preference factors for underwear material quality were drawn with the five factors of sense of weight/pliability, lustering/see-through, tactility, and sense of cold and warmth. The preferred underwear material showed difference according to gender, existence and nonexistence of atopic determatitis, and degree of strength of skin itching caused by clothing materials. The demand performances of clothing in case of selecting underwear were drawn with the four factors of hygiene/practicality, skin protection, quality of materials, and aesthetic attribute. The demand performance of underwear showed difference according to gender, existence and nonexistence of atopic determatitis, degree of strength of skin itching caused by clothing materials.

• Journal of Digital Convergence
• /
• v.14 no.8
• /
• pp.343-353
• /
• 2016

This study was done to identify variables predicting of nursing performance with basic psychological need, self-leadership and job stress in clinical nurses. The participants were 160 clinical nurses, located in P city and D province in korea. Data were collected from Feb to March, 2016 by questionnaire survey. Data analysis was done by using SPSS WIN 18.0 program with independent t-test and analysis of variance, Pearson's correlation analysis, and multiple linear regression. This study shows positive correlations between nursing performance and basic psychological needs(r=.59, p<.001), autonomy(r=.31, p<.001), competency(r=.68, p<.001), relatedness(r=.48, p<.001), self-leadership(r=.58, p<.001), job stress(r=.19, p<.05). Basic psychological needs(${\beta}$=.43), self-leadership(${\beta}$=.33), job stress(${\beta}$=.21) have a 47.3%(Adj $R^2$ .473) explanatory power for the nursing performance in clinical nurses. This study confirmed that basic psychological needs, self-leadership and job stress were identified to improve nursing performance. Therefore we should develop programs in order to increase basic psychological needs and self-leadership.

• Journal of Digital Convergence
• /
• v.16 no.12
• /
• pp.541-553
• /
• 2018

The purpose of this study was to analyze the differences in the frequency and importance of basic nursing practice between comprehensive nursing care service wards and general wards and to provide basic data for the efficient of services. The subjects of this study were 99 comprehensive nursing care service and 90 general wards. Data were collected from February 1 to 28, 2018 and analyzed using a t-test, one-way ANOVA, Pearson's correlation coefficient, Scheffe test. The results showed that the frequency of basic nursing practice was higher by 2.43, and there were significant differences in personal hygiene, nutrition and excretion, exercise & activity. The recognition of the importance of basic nursing was high in both groups, but comprehensive nursing care service wards were slightly higher at 4.24 points. However, as the frequency of practice is lower than the recognition of the importance of basic nursing, a method to increase the frequency of practice is necessary. These results suggest that comprehensive nursing care service wards should provide appropriate nursing staff and system development so the nurses can provide care service as professionals.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.2
• /
• pp.63-68
• /
• 2017

In the present study, a wind tunnel test for a rotor-blade configuration was conducted to investigate a basic aerodynamic performance and a effect of the cross wind. The diameter of the configuration was 1.46 m and the test was carried out for both a clean and a tripped configurations. The boundary layer for the trip configuration was simulated by zig-zag tape and the test performed on constant-velocity and constant-rotational modes. It was shown that the test result for the tripped configuration reduces the maximum power coefficient by 9.4% ~ 12.1% compared to the clean one. Within $5^{\circ}$ of the flow angle, there is no significant loss of power, however, the coefficient is reduced by 5.3% ~ 36.7% in the range of $10^{\circ}{\sim}30^{\circ}$.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.776-781
• /
• 2008

In this paper, comments on the needs of establishment of railway test line - capable of mid and long term performance evaluation of vehicle/infra/electricity/signal component/system - are described. Based on the previous studies, national/social/economic needs, the states of similar lines of foreign countries, concept of test line, and basic application plan are summarized. Especially, core things needed to the establishment of test line are commented.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.9
• /
• pp.114-129
• /
• 1996

This paper describes the whole development phase for the underwater vehicle actuating system with high hydroload torque disturbance. This includes requirement analysis, system modeling, control algorithm design, real time implementation, test and performance evaluations. As for driving control algorithms, fuzzy logic, variable structure and PD(Proportional-Differential) algorithm were designed and implemented on board controller using a single chip microprocessor. Intel 8797. And test and performance evaluation is carried out both single test and wystem integration test. We could confirm the basic performance of actuating system through the single test and gereral developing work of any actuating systems was finished with a single performance test of actuating system without system integration test. But, we suggested that system integration test be needed. System integration test is carried out using G/C HILS(Guidance and Control Hardware-In-the -Loop Simulation) which is constituted flight motion simulator, load simulator, real time host computer and the related subsystems such as inertial navigation system, power supply system and Guidance and Control Computer etc.. The most important practical contribution of this paper is that full system characteristics such as minimal control effort, enhancement of guidance and autopilot performance by the actuating system using G/C HILS technique are investigated. Through full running G/C HILS, in spite of the passing to single tests, some control algorithm resulted in failure as to stability of full system and system time frame.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.148-154
• /
• 2022

As the 4th industrial age approaches, the demand for semiconductors is increasing enough to be used in all electronic devices. At the same time, semiconductor technology is also developing day by day, leading to ultraprecision and low power consumption. Semiconductors that keep getting smaller generate heat because the energy density increases, and the generated heat changes the shape of the semiconductor package, so it is important to manage. The temperature change is not only self-heating of the semiconductor package, but also heat generated by external damage. If the package is deformed, it is necessary to manage it because functional problems and performance degradation such as damage occur. The package burn in test in the post-process of semiconductor production is a process that tests the durability and function of the package in a high-temperature environment, and heat dissipation performance can be evaluated. In this paper, we intend to review a new material formulation that can improve the performance of the adapter, which is one of the parts of the test socket used in the burn-in test. It was confirmed what characteristics the basic base showed when polyamide, a high-molecular material, and alumina, which had high thermal conductivity, were mixed for each magnification. In this study, functional evaluation was also carried out by injecting an adapter, a part of the test socket, at the same time as the specimen was manufactured. Verification of stiffness such as tensile strength and flexural strength by mixing ratio, performance evaluation such as thermal conductivity, and manufacturing of a dummy device also confirmed warpage. As a result, it was confirmed that the thermal stability was excellent. Through this study, it is thought that it can be used as basic data for the development of materials for burn-in sockets in the future.

• Journal of Korean Academy of Nursing
• /
• v.46 no.2
• /
• pp.283-292
• /
• 2016

Purpose: This study was done to verify effects of a self-directed feedback practice using smartphone videos on nursing students' basic nursing skills, confidence in performance and learning satisfaction. Methods: In this study an experimental study with a post-test only control group design was used. Twenty-nine students were assigned to the experimental group and 29 to the control group. Experimental treatment was exchanging feedback on deficiencies through smartphone recorded videos of nursing practice process taken by peers during self-directed practice. Results: Basic nursing skills scores were higher for all items in the experimental group compared to the control group, and differences were statistically significant ["Measuring vital signs" (t=-2.10, p=.039); "Wearing protective equipment when entering and exiting the quarantine room and the management of waste materials" (t=-4.74, p<.001) "Gavage tube feeding" (t=-2.70, p=.009)]. Confidence in performance was higher in the experimental group compared to the control group, but the differences were not statistically significant. However, after the complete practice, there was a statistically significant difference in overall performance confidence (t=-3.07. p=.003). Learning satisfaction was higher in the experimental group compared to the control group, but the difference was not statistically significant (t=-1.67, p=.100). Conclusion: Results of this study indicate that self-directed feedback practice using smartphone videos can improve basic nursing skills. The significance is that it can help nursing students gain confidence in their nursing skills for the future through improvement of basic nursing skills and performance of quality care, thus providing patients with safer care.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.3
• /
• pp.11-23
• /
• 1995

In this paper, a parallel pipelined processor model which acts as a small VLIW processor architecture and a scheduling algorithm for extracting instruction-level parallelism on this architecture are proposed. The proposed model has a dual-instruction mode which has maximum 4 basic operations being executed in parallel. By combining these basic operations, variable instruction set can be designed for various applications. The scheduling algorithm schedules basic operations for parallel execution and removes pipeline hazards by examining data dependency and resource conflict relations. In order to examine operation and evaluate the performance,a C compiler and a simulator are developed. By simulating various test programs with the compiler and the simulator, the characteristics and the performance result of the proposed architecture are measured.