• 천문학회보
• /
• 제39권2호
• /
• pp.103-103
• /
• 2014

Manufacturing of lens and mirror using Diamond Turning Machine (DTM) offers distinct advantages including short fabrication time and low cost as compared to grinding or polishing process. However, the DTM process can leave mid-frequency error in the optical surface which generates an undesirable diffraction effect and stray light. The mid-frequency error is expected to be eliminated by mechanical polishing after the DTM process, but polishing of soft surface of ductile aluminum is extremely difficult because the polishing process inevitably degrades the surface form accuracy. In order to increase its surface hardness, we performed electroless nickel plating on the surface of diamond-turned aluminum (Al-6061T6) off-axis mirrors, which was followed by the 6-hour-long baking process at $200^{\circ}C$ for improving its hardness. Then we polished the nickel plated off-axis mirrors to remove the mid-frequency error and measured polished mirror surfaces using the optical surface profilometer (NT 2000, Wyko Inc.). Finally, we ascertained that the mid-frequency error on the mirror surface was successfully removed. During the whole processes of nickel plating and polishing, we monitored the form accuracy using the ultra-high accurate 3-D profilometer (UA3P, Panasonic Corp.) to maintain it within the allowable tolerance range (< tens of nm). The polished off-axis mirror was optically tested using a visible laser source and a pinhole, and the airy pattern obtained from the polished mirror was compared with the unpolished case to check the influence of mid-frequency error on optical images.

• 천문학회지
• /
• 제38권4호
• /
• pp.437-443
• /
• 2005

The Solar Radio Burst Locator (SRBL) is a spectrometer that can observe solar microwave bursts over a wide band (0.1-18 GHz) as well as detect the burst locations without interferometry or mechanical scanning. Its prototype has been operated at Owens Valley Radio Observatory (OVRO) since 1998. In this study, we have evaluated the capability of the SRBL system in flux and radio burst location measurements. For this, we consider 130 microwave bursts from 2000 to 2002. The SRBL radio fluxes of 53 events were compared with the fluxes from USAF/RSTN and the burst locations of 25 events were compared with the optical flare locations. From this study, we found: (1) there is a relatively good correlation (r = 0.9) between SRBL flux and RSTN flux; (2) the mean location error is about 8.4 arcmin and the location error (4.7 arcmin) of single source events is much smaller than that (14.9 arcmin) of multiple source events; (3) the minimum location error usually occurred just after the starting time of burst, mostly within 10 seconds; (4) there is a possible anti-correlation (r = -0.4) between the pointing error of SRBL antenna and the location error. The anti-correlation becomes more evident (r=-0.9) for 6 strong single source events associated with X-class flares. Our results show that the flux measurement of SRBL is consistent with that of RSTN, and the mean location error of SRBL is estimated to be about 5 arcmin for single source events.

• 방송공학회논문지
• /
• 제20권4호
• /
• pp.533-544
• /
• 2015

최근에 대부분의 비디오 서비스는 무선 네트워크를 통해서 전송된다. 하지만 무선 네트워크 환경에서 비디오 패킷은 전송되는 동안 오류에 노출되기 쉽다. 이러한 문제를 해결하기 위해 본 논문에서는 새로운 오류 은닉 (Error Concealment : EC) 알고리즘을 제안한다. 제안하는 알고리즘에서는 High Efficiency Video Coding (HEVC) 환경에서 시간적 상관도를 이용한 적응적인 예측 단위 기반의 움직임 벡터 외삽 (Adaptive Prediction Unit-based Motion Vector Extrapolation : APMVE)과 공간적 상관도를 이용한 경계 정합(Boundary Matching : BM) 알고리즘을 이용한다. APMVE는 시간적 상관도를 기반으로 손실 프레임 이전 프레임의 예측 단위(Prediction Unit : PU)를 이용하여 오류 은닉 기본 단위 (Error Concealment Basic Unit : ECBU)를 적응적으로 결정하고 BM은 공간적 상관도를 이용하여 비신뢰 블록 (Unreliable Block)들에 한하여 수행한다. 제안하는 알고리즘은 기존 알고리즘에서 나타나는 블록킹 열화를 효과적으로 제거하여 높은 주관적 화질을 보여준다.

• 한국융합학회논문지
• /
• 제8권5호
• /
• pp.185-192
• /
• 2017

공작기계의 오차는 크게 기하하적 오차, 열변형 오차 및 가공오차로 나눌 수 있다. 본 연구에서는 2차원 가공에서, 각 오차의 원인이 전체 오차에 미치는 영향과 각 오차의 상대적 크기를 정량적으로 분석하였다. 오차의 상대적 크기는 열변형 오차와 가공오차가 상대적으로 기하학적 오차에 비해 크게 나타났으며, 이는 가공 정밀도에 직접적으로 관계된다고 판단되었다. 세 가지 오차를 제거하기 위해 측정된 오차 프로파일을 이용하여 오차의 보정가능성을 검토하였다. 그 결과 각각의 오차요인에 대하여 약 50%의 시스템 오차를 보정할 수 있었으며, 특히, 열변형 오차와 가공오차의 경우 큰 폭으로 오차를 보정할 수 있음을 확인하였다. 본 연구를 통하여 가공에 관한 기본적인 데이터 베이스를 구축할 수 있으며, 이를 통해 사용자 관점에서 가공오차에 대한 보정이 가능할 것으로 기대된다.

• 한국통신학회논문지
• /
• 제37C권11호
• /
• pp.1054-1063
• /
• 2012

본 논문에서는 다계층 브로드캐스트 통신 환경에서 주목받는 비균등 오류정정기법(UEP)에 대하여 기본 이론을 설명하고 그 효과와 응용 분야를 소개한다. 또한 현재까지의 UEP 기술의 연구 동향을 표준 적용 현황과 관련 논문의 소개를 통해 조명하고, 이를 통해 표준화 전망을 비롯한 앞으로의 활용 방안을 제시한다.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권10호
• /
• pp.571-576
• /
• 2003

XML Web Service based on internet can cause problems on transmission speed and data error. Also system analysis results simulated by several different research groups can hardly have reliability because of error data that come from improperly managed files. In order to solve this problems, algorithm sever using XML Web Service is shared on the internet so widely that various application programs based on basic analysis module with a united IO can be developed. And also XML Dataset DB is interacted with XML Web Service, which prevents propagation of error data. It causes to improve reliabilityon the load flow analysis result and solve the problems on data error or transmission speed that can possibly come from internet.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.662-667
• /
• 1996

For compensating the error motion of hydrostatic guideways, the structure and the theoretical design method of ACC(Active Controlled Capillary) are proposed. The maximum controllable range, micro step response and dynamic characteristics of ACC are analyzed experimentally for verifing the availability. The experimental results showed that by the use of ACC, the error motion within 2.7${\mu}{\textrm}{m}$ of a hydrostatic guideway can be compensated with the resolution of 27nm, 1/100 of uncontolled error, and the frequency band of 5.5Hz. From these results, it Is confirmed that the ACC is very effect to improve the moving accuracy of high or ultra precision hydrostatic guideways.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제9권4호
• /
• pp.327-332
• /
• 2009

This paper proposes a method to improve the accuracy of a short-term electrical load forecasting (STLF) system based on neuro-fuzzy models. The proposed method compensates load forecasts based on the error obtained during the previous prediction. The basic idea behind this approach is that the error of the current prediction is highly correlated with that of the previous prediction. This simple compensation scheme using error information drastically improves the performance of the STLF based on neuro-fuzzy models. The viability of the proposed method is demonstrated through the simulation studies performed on the load data collected by Korea Electric Power Corporation (KEPCO) in 1996 and 1997.

• 응용통계연구
• /
• 제6권2호
• /
• pp.303-309
• /
• 1993

오차에 대한 함수관계식이 불확실한 경우 두가지 실험계획법을 제시하였다. 하나는 모든 가능한 오차함수식을 대상으로 최저의 효율성을 높이는 방안이고 다른 하나는 확률을 이용한 최저의 평균효율성을 높이는 방안이다. 이러한 두 방법을 D-와 이분산 G-최적성에 적응시켜 그 차이점을 비교연구하였다.

• 한국정밀공학회지
• /
• 제14권12호
• /
• pp.114-120
• /
• 1997

For compensating the error motion of hydrostatic tables, we have introduced a way that the clearance of table is controlled corresponding to the amount of eror with the actively controlled variable capillary, named as ACC. In previous paper, through the basic test, it was confirmed that by the use of ACC, the error motion within 2.7$\mu$ m of a hydrostatic table could be compensated with the resolution of 27nm, 1/100 contollable range, and with the frequency bandwidth of 5.5Hz, structurally. In this paper, we performed practical compensation of the linear and angular motion error of hydrostatic table using ACC. For improving the compensated motion accuracy, iterative control method is put into the control system. The experimental results show that by the simultaneous compensation of error, the linear and angular motion error are improved upto 0.25$\mu$ m and 0.4arcsec, which are about 1/10 and 1/3 of the non-compensated motion errors respectively.