Journal of the Korea Convergence Society (한국융합학회논문지)

Korea Convergence Society (한국융합학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Analysis of Error Sources and Error Compensation in Machine Tools

공작기계 오차 요인의 분석 및 보정에 관한 연구

  • Kim, Ki-Hwan (Department of Mechanical Engineering, Graduate School, Daegu University) ;
  • Youn, Jae-Woong (Division of Mechanical Engineering, Daegu University)
  • 김기환 (대구대학교 대학원 기계공학과) ;
  • 윤재웅 (대구대학교 기계공학부)
  • Received : 2017.04.11
  • Accepted : 2017.05.20
  • Published : 2017.05.28
Download PDF
⟨ Previous Next ⟩

Abstract

Machine tool errors can be divided into geometric error, thermal deformation error, and machining error. In this study, the influence of each error on the total error and the relative size of each error are quantitatively analyzed in 2D machining. The thermal deformation error and the machining error caused a relatively large error compared to the geometric error, which is directly related to the machining accuracy. In order to eliminate the error factors, the possibility of error compensation was examined by analyzing the measured error profile shape. As a result, about 40 ~ 50% error compensation was achieved for each error factor. Through this study, it is possible to construct a basic data base on machining, and it is expected that it will be able to compensate the machining error from the viewpoint of users.

공작기계의 오차는 크게 기하하적 오차, 열변형 오차 및 가공오차로 나눌 수 있다. 본 연구에서는 2차원 가공에서, 각 오차의 원인이 전체 오차에 미치는 영향과 각 오차의 상대적 크기를 정량적으로 분석하였다. 오차의 상대적 크기는 열변형 오차와 가공오차가 상대적으로 기하학적 오차에 비해 크게 나타났으며, 이는 가공 정밀도에 직접적으로 관계된다고 판단되었다. 세 가지 오차를 제거하기 위해 측정된 오차 프로파일을 이용하여 오차의 보정가능성을 검토하였다. 그 결과 각각의 오차요인에 대하여 약 50%의 시스템 오차를 보정할 수 있었으며, 특히, 열변형 오차와 가공오차의 경우 큰 폭으로 오차를 보정할 수 있음을 확인하였다. 본 연구를 통하여 가공에 관한 기본적인 데이터 베이스를 구축할 수 있으며, 이를 통해 사용자 관점에서 가공오차에 대한 보정이 가능할 것으로 기대된다.

Keywords

References

  1. R. Ramesh, M. Mannan, A. Poo, "Error compensation in machine tools-a review. Part I: geometric, cutting-force induced and fixture-dependent errors", Int J. Mach. Tool Manu., Vol.40, No,9, pp.1235-1256, 2000. https://doi.org/10.1016/S0890-6955(00)00009-2
  2. Schwenke H, Knapp W, Haitjema H, "Geometric error measurement and compensation of machines -an update", Annals of the CIRP, Vol.57, No.2, pp.660-675, 2008. https://doi.org/10.1016/j.cirp.2008.09.008
  3. Y. Schmitz, J. Ziegert, J. Canning, R. Zapata, "Case study: A comparision of error sources in high-speed milling", Precision Engineering, Vol.32, pp.126-133, 2009.
  4. S. Ibaraki, M. Sawada, A. Matsubara, T. Matsushita, "Machining tests to identify kinematic errors on five-axis machine tools", Precision Engineering, Vol.34, pp.387-398, 2010. https://doi.org/10.1016/j.precisioneng.2009.09.007
  5. S. Aguado, D. Samper, J. Santolaria, "Towards an effective identification strategy in volumetric error compensation of machine tools", Meas Sci Technol., Vol.23, No.6, pp.1-12, 2012.
  6. R. Ramesh, M. Mannan, A. Poo, "Error compensation in machine tools-a review. Part II: thermal errors", Int J. Mach. Tool Manu., Vol.40, No,9, pp.1257-1284, 2000. https://doi.org/10.1016/S0890-6955(00)00010-9
  7. M. Attia, L. Kops, "Computer simulation of nonlinear thermoelastic behaviour of a joint in machine tool structure and its effect on thermal deformation", ASME Trans. J. of Eng. for Ind. Vol.101, pp.355-361, 1979. https://doi.org/10.1115/1.3439518
  8. M. Attia, L. Kops, "A new method for determining the thermal contact resistance at machine tool joints", Annals of the CIRP, Vol.30, No.1, pp.259-264, 1981. https://doi.org/10.1016/S0007-8506(07)60938-X
  9. R. Ramesh, M. Mannan, A. Poo, "Error compensation in machine tools - a review Part II: thermal errors", Int. J. Mach. Tools Manuf., Vol. 40, pp.1257-1284, 2000. https://doi.org/10.1016/S0890-6955(00)00010-9
  10. W. Yun, D. Cho, "An improved cutting force model considering the size effect in end milling", ASME Int. Mech. Eng. Congress and Exposition, Orlando, pp.223-229, 2000.
  11. G. Kim, B. Kim, C. Chu, "Estimation of cutter deflection and formerror in ball-end milling process", Int. J. Mach. Tools Manuf., Vol. 43, pp.917-924, 2003. https://doi.org/10.1016/S0890-6955(03)00056-7
  12. Y. Cheng, J. Chin, "Machining contour errors as ensembles of cutting, feeding and machine structure effects", Int. J. Mach. Tools Manuf., Vol.43, pp.1001-1014, 2003. https://doi.org/10.1016/S0890-6955(03)00093-2
  13. K. H. Kim, A Study on the Accuracy Analysis of 3-Axis and 5-Axis Machining Center and Error Compensation, Master Thesis, Daegu Univ. 2015.
  14. KS B ISO Standards. "Test conditions for machining centres-Part 2:Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis(vertical Z-axis)" KS B ISO 10791-2, 2007
  15. C. Eun, Y. C. Lee, "Compensation of the non-linearity of the audio power amplifier converged with digital signal processing technique", J.of the Korea Convergence Society, Vol.7, No.3, pp.77-85
  16. S. W. Lee, Development of thermal error measurement and compensation system for spindle and feed axis in CNC machine tools, Ph.D Thesis, Deoul National Univ. 2000