• 제목/요약/키워드: base material

검색결과 1,926건 처리시간 0.034초

비탈면보호를 위한 폐유기물질의 활용성에 대한 연구 (A Study on Utilization of Waste Organic Matter for Slope Protection)

  • 박경식;황인상;배우석
    • 한국지반환경공학회 논문집
    • /
    • 제16권4호
    • /
    • pp.41-48
    • /
    • 2015
  • 현재 우리나라의 커피소비량은 매년 증가하는 추세에 있으며 이에 따라 연간 약 20만 톤의 커피박(Spent Coffee Grounds, SCG)이 발생되고 있으며 SCG는 폐유기물질로 대부분 음식물쓰레기로 분리되어 연간 27만 톤이 수분이 함유된 채로 버려져 심각한 환경적 이슈가 되고 있는 현실이다. 본 연구에서는 커피박의 활용가능성을 평가하기 위해 이화학적 특성분석과 중장기 생육실험을 수행하였으며, 실험결과 기존의 기반재에 SCG를 혼합하는 경우 보습력의 증가와 유기물함량의 보강으로 초기발아나 초기생육은 기존 기반재에 비해 저조하나 중기적으로 발아와 성장이 촉진되는 현상을 보이며 특히 관수중단 등의 상황에서 기존 기반재에 비해 고사율이 낮고 양분의 부족으로 인한 여러 현상이 줄어들고 있는 것으로 확인되었다. 따라서 SCG는 질소성분이 풍부한 폐유기물로 초기성장을 저해하는 특성이 있으나 보습능력과 유기물의 공급으로 장기생장에 유리한 성질을 가지고 있는 것으로 확인되어 기존의 기반재를 대체하거나 보완할 수 있는 재료인 것으로 판단된다.

의치상 레진에 대한 개상용 레진의 결합 강도에 관한 연구 (THE BOND STRENGTH OF REBASE RESIN TO DENTURE BASE RESIN)

  • 김일평;조혜원;진태호
    • 대한치과보철학회지
    • /
    • 제31권4호
    • /
    • pp.515-522
    • /
    • 1993
  • The purpose of this study was to evaluate the bond strength of rebase resin to denture base resin. The denture base resins in this study were Premium Super-20(Lang Dental Mfg. Co. Inc., Wheeling, USA) and Lucitone 199(Dentsply International Inc., York, USA). And the rebase resins were Repair Acrylic(Lang Dental Mfg. Co. Inc., Wheeling USA). Toughron Rebase(Miki Chemical Product Co. Ltd., Japan) , Tokuso Rebase(Tokuyama Soda. Co. Ltd., Japan) and Triad VLC Reline Material(Dentsply International Inc., York, USA). The obtained results were as follows : 1. The bond strength of Repair Acrylic to Premium Super-20, and that of Toughron Rebase to Lucitone 199 were the highest. 2. In Premium Super-20 and Lucitone 199, bond strength of all rebase resins had significant differences. 3. The bond strength of Triad VLC Reline Material was inclined to the lowset.

  • PDF

삼결정 실리콘 태양전지의 19%변환 효율 최적요건 고찰에 관한 연구 (The study of High-efficiency method usign Tri-crystalline Silicon solar cells)

  • 이욱재;박성현;고재경;김경해;이준신
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 하계학술대회 논문집
    • /
    • pp.318-321
    • /
    • 2002
  • This paper presents a proper condition to achieve high conversion efficiency using PC1D simulator on sri-crystalline Si solar cells. Various efficiency influencing parameters such as rear surface recombination velocity and minority carrier diffusion length in the base region, front surface recombination velocity, junction depth and doping concentration in the Emitter layer, BSF thickness and doping concentration were investigated. Optimized cell parameters were given as rear surface recombination of 1000 cm/s, minority carrier diffusion length in the base region 200 $\mu\textrm{m}$, front surface recombination velocity 100 cm/s, sheet resistivity of emitter layer 100 Ω/$\square$, BSF thickness 5 $\mu\textrm{m}$, doping concentration 5${\times}$10$\^$19/ cm$\^$-3/. Among the investigated variables, we learn that a diffusion length of base layer acts as a key factor to achieve conversion efficiency higher than 19 %.

  • PDF

Dual Gate Emitter Switched Thyristor의 Latch-up 전류 특성 (Characteristics of Latch-up Current of the Dual Gate Emitter Switched Thyristor)

  • 이응래;오정근;이형규;주병권;김남수
    • 한국전기전자재료학회논문지
    • /
    • 제17권8호
    • /
    • pp.799-805
    • /
    • 2004
  • Two dimensional MEDICI simulator is used to study the characteristics of latch-up current of Dual Gate Emitter Switched Thyristor. The simulation is done in terms of the current-voltage characteristics, latch-up current density, ON-voltage drop and electrical property with the variations of p-base impurity concentrations. Compared with the other power devices such as MOS Controlled Cascade Thyristor(MCCT), Conventional Emitter Switched Thyristor(C-EST) and Dual Channel Emitter Switched Thyristor(DC-EST), Dual Gate Emitter Switched Thyristor(DG-EST) shows to have the better electrical characteristics, which is the high latch-up current density and low forward voltage-drop. The proposed DG-EST which has a non-planer p-base structure under the floating $N^+$ emitter indicates to have the better characteristics of latch-up current and breakover voltage.

Dental fiber-post resin base material: a review

  • Lamichhane, Aashwini;Xu, Chun;Zhang, Fu-Qiang
    • The Journal of Advanced Prosthodontics
    • /
    • 제6권1호
    • /
    • pp.60-65
    • /
    • 2014
  • Teeth that have short clinical crown, which are not alone enough to support the definitive restoration can be best treated using the post and core system. The advantages of fiber post over conventional metallic post materials have led to its wide acceptance. In addition to that the combination of aesthetic and mechanical benefits of fiber post has provided it with a rise in the field of dentistry. Also the results obtained from some clinical trials have encouraged the clinicians to use the fiber posts confidently. Fiber posts are manufactured from pre-stretched fibers impregnated within a resin matrix. The fibers could that be of carbon, glass/silica, and quartz, whereas Epoxy and bis-GMA are the most widely used resin bases. But recently studies are also found to be going on for polyimide as possible material for the fiber post resin base as a substitute for the conventional materials.

지중배전케이블 기저수지의 수증기 투과 전달특성 (Chararcteristics of Water Vapor Transmission in Base Resin for Underground Residential Distribution Power Cable)

  • 송재주;한병성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 춘계학술대회 논문집 기술교육전문연구회
    • /
    • pp.149-153
    • /
    • 2003
  • In URD(Underground Residential Distribution) power cable, experiments of WVT(Water Vapor Transmission) test on the Base Resin accomplished to specimens which contained CB(Carbon Black), anti-oxidant to base resin and made by pressing to resin of pellet or lump form. a kind of specimens was HDPE(High Density Polyethylene), MDPE(Medium Density Polyethylene), LDPE(Low Density Polyethylene), LLDPE(Linear Low Density Polyethylene), PVC(Polyvinyl Chloride). as a results of WVT test, we saw that WVT ratio was HDPE < LLDPE < MDPE≒LDPE${\ll}$ PVC. WVT properties of PVC using for jacket showed properties 15-20 times more than MDPE or LLDPE. Therefore, to development of watertightness cable, our works present need of Changing in insulating materials.

  • PDF

속도 향상을 위한 병합트랜지스터를 이용한 ISL의 설계 (Design of ISL(Intergrated Schottky Logic) for improvement speed using merged transistor)

  • 장창덕;백도현;이정석;이용재
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1999년도 춘계학술대회 논문집
    • /
    • pp.21-25
    • /
    • 1999
  • In order to remove minority carries of the base region at changing signal in conventional bipolar logic circuit, we made transistor which is composed of NPN transistor shortened buried layer under the Base region, PNP transistor which is merged in base, epi layer and substrate. Also the Ring-Oscillator for measuring transmission time-delay per gate was designed as well. In the result, we get amplitude of logic voltage of 200mV, the minimum of transmission delay-time of 211nS, and the minimum of transmission delay-time per gate of 7.26ns in AC characteristic output of Ring-Oscillator connected Gate.

  • PDF

고내압용 MOS 구동 사이리스터 소자의 설계 및 전기적 특성에 관한 연구 (Study on Design and Electric Characteristics of MOS Controlled Thyristor for High Breakdown Voltage)

  • 홍영성;정헌석;정은식;강이구
    • 한국전기전자재료학회논문지
    • /
    • 제24권10호
    • /
    • pp.794-798
    • /
    • 2011
  • This paper was carried out design of 1,700 V Base Resistance Thyristor for fabrication. We decided conventional BRT (base resistance thyristor) device and Trench Gate type one for design. we carried out device and process simulation with T-CAD tools. and then, we have extracted optimal device and process parameters for fabrication. we have analysis electrical characteristics after simulations. As results, we obtained 2,000 V breakdown voltage and 3.0 V Vce,sat. At the same time, we carried out field ring simulation for obtaining high voltage.

용접부의 선삭특성에 관한 실험적 연구 (An Experimental Study on the Turning Property of Welded Material)

  • 장복득
    • 한국정밀공학회지
    • /
    • 제3권3호
    • /
    • pp.13-21
    • /
    • 1986
  • Turning property of metal is affected by the cutting condition, tool geome- try and cutting material. But the turning property of welded material is not welknown. Welded structures usually contain nonhomogeneity, defects and resi- dual stresses due to differential contraction between welded metal and base metal. In this paper, authors conducted the experimental test on the turning property, by changing turning condition and welding electrodes of the welded specimens. The results obtained in these experimental tests are as follows; (1) Within the limit of this experimental test, the cutting force of the weld zone is bigger than that of base metal, and this phenomena is caused by the different mechanical property of the weld zone. The range of the variation of cutting force in the weld zone is caused by the nonhomogeneity of the weld zone, respectively. (2) The surface roughness follows the general characteristic of the effect of cutting condition on the surface roughness and the surface roughness of the weld zone shows coarse surface comparing with that of the base metal. (3) The specimen welded by the electrode E4301, shows worse cutting property than that of E4361 and E4313.

  • PDF