• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.963-968
• /
• 2005

For worm robots applied to pipe inspection and colonoscopy, earthworm-like robots that have a locomotion pattern in backward wave or green caterpillar-like robots that have a locomotion pattern in forward wave have been studied widely. Note however that a method using a single and fixed locomotion pattern is not desirable in the sense of mobility cost, if there are various changes in pipe diameter. In this paper, locomotion patterns are considered for a semi-looper-like robot, which adopts a locomotion pattern of green caterpillars as the basic motion and sometimes can realize a locomotion pattern of looper, whose motion approximately consists of two rhythms or relatively low rhythm.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권2호
• /
• pp.152-161
• /
• 2013

This paper presents a control effectiveness analysis of the hawkmoth Manduca sexta. A multibody dynamic model of the insect that considers the time-varying inertia of two flapping wings is established, based on measurement data from the real hawkmoth. A six-degree-of-freedom (6-DOF) multibody flight dynamics simulation environment is used to analyze the effectiveness of the control variables defined in a wing kinematics function. The aerodynamics from complex wing flapping motions is estimated by a blade element approach, including translational and rotational force coefficients derived from relevant experimental studies. Control characteristics of flight dynamics with respect to the changes of three angular degrees of freedom (stroke positional, feathering, and deviation angle) of the wing kinematics are investigated. Results show that the symmetric (asymmetric) wing kinematics change of each wing only affects the longitudinal (lateral) flight forces and moments, which implies that the longitudinal and lateral flight controls are decoupled. However, there are coupling effects within each plane of motion. In the longitudinal plane, pitch and forward/backward motion controls are coupled; in the lateral plane, roll and side-translation motion controls are coupled.

• 로봇학회논문지
• /
• 제15권4호
• /
• pp.309-315
• /
• 2020

This study shows a control strategy that acquires both precision and manipulation sensitivity of remote center motion with manual traction for a surgical assistant robot. Remote center motion is an essential function of a laparoscopic surgical robot. The robot has to keep the position of the insertion port in a three-dimensional space, and general laparoscopic surgery needs 4-DoF (degree-of-freedom) motions such as pan, tilt, spin, and forward/backward. The proposed robot consists of a 6-axis collaborative robot and a 2-DoF end-effector. A 6-axis collaborative robot performs the cone-shaped trajectory with pan and tilt motion of an end-effector maintaining the position of remote center. An end-effector deals with the remaining 2-DoF movement. The most intuitive way a surgeon manipulates a robot is through direct teaching. Since the accuracy of maintaining the remote center position is important, direct teaching is implemented based on position control in this study. A force/torque sensor which is attached to between robot and end-effector estimates the surgeon's intention and generates the command of motion. The predefined remote center position and the pan and tilt angles generated from direct teaching are input as a command for position control. The command generation algorithm determines the direct teaching sensitivity. Required torque for direct teaching and accuracy of remote center motion are analyzed by experiments of panning and tilting motion.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2010년도 춘계학술대회
• /
• pp.383-384
• /
• 2010

선박의 제어판은 전진 또는 후진시 조종성능을 결정하는 중요한 요소이다. 본 연구에서는 단동타의 성능평가를 위하여 $Re=2.0\times10^4$ 에서 2-프레임 그레이레벨 상호상관 PIV기법을 이용하여 모텔 주위의 속도장을 계측하였다. 특히 전진시 영각 10도와 20도 사이에서 발생하는 박리영역을 후진시에 나타나는 영향을 평가하였다. 단동타의 형상은 NACA0018을 사용하여 자유유동이 역 방향으로 위치하여 후진시의 효과를 알아본 결과 박리 영역은 전방과 비슷한 영각에서 발생함을 알 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.171.5-171
• /
• 2001

Information that is acquired by adhered sensors on a body has been commonly used for the three-dimensional real-time motion capture algorithm. This paper describes realtime motion capture algorithm using computer vision. In a real-time image sequence, human body silhouette is extracted use a background subtraction between background image and the reference image. Then a human standing posture whether forward or backward is estimated by extraction of skin region in the silhoutte. After then, the principal axis is calculated in the torso and the face region is estimated on the principal axis. Feature points, which are essential condition to track the human gesture, are obtained ...

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.854-857
• /
• 2001

At present, colonoscopy is performed by means of quite long and flexible endoscopes and controlled manually. Although the flexibility of the distal tip allows the endoscope to follow the tortuous path of the colon, the insertion of the endoscope requires the endoscopist to exert forces on and to perform rotations of the proximal end; these actions cause discomfort to the patient. Though self-propelling colonoscopic systems has been suggested to overcome these problems, it is difficult to pass through highly curved regions of the intestine. In this paper, we introduce a steering mechanism for a self-propelling coloinlscope, the smart capsule, which has three actuator units. The mechanism is designed not only to move forward and backward but also to pass through the curved regions. We derived the governing equations of this mechanism. Active movements and motion control are developed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.42-42
• /
• 2000

This paper concerns an efficient aperiodic static crab walking algorithm for quadruped walking machine in rough terrain. In this algorithm, the requirements for forward stability margin and backward stability margin could be given differently in order to consider the slope of terrain and disturbances resulting from moving velocity. To restrict the searing regions for motion variables, such as moving distances until a leg is lifted or is placed, the standard leg transferring sequence is decided to be that of wave gaits. standard support pattern is also proposed that enables the quadruped to continue forward motion using the standard leg transferring sequence without falling into deadlock.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 춘계학술대회
• /
• pp.249-251
• /
• 2022

본 연구에서는 뇌파를 이용하여 드론을 제어하기 위한 기계학습을 논의한다. 드론의 이륙과 전진, 후진, 좌측 이동 그리고 우측 이동을 제어대상으로 정의하였고 이를 제어하기 위한 뇌파의 신호를 전두엽을 대상으로 하는 Fp1·Fp2 2채널 건식 전극(NeuroNicle FX2) 뇌파 측정장비를 통하여 5.19초동안 각 제어대상과 연관된 행동의 운동 심상을 눈을 뜬 상태에서 측정(Sampling Rate 250Hz, Cutoff Frequency 6~20Hz) 하였다. 측정된 뇌파신호에 대해 매틀랩의 분류학습기를 이용해서 삼중 계층 신경망, 로지스틱 회귀커널, 비선형 3차 SVM 학습을 실시하였으며 학습결과 로지스틱 회귀 커널 학습에서 드론의 이륙과 전진, 후진, 좌측 이동 그리고 우측 이동을 위한 가장 높은 정확도를 가지고 있음을 클래스 참양성률로 확인할 수 있었다.

• 한국컴퓨터정보학회논문지
• /
• 제7권2호
• /
• pp.95-100
• /
• 2002

피드백 채널을 이용한 디코더는 인코더로 전송에러에 의한 오염된 매크로 블록들의 주소를 알려준다. NACK 메시지의 수신으로 인코더는 전송에러가 발생된 프레임의 GOB와 MB를 기준으로 forward dependency를 적용으로 확산된 에러전파영역을 지닌 다음순서의 프레임을 만들어낸다. 이 프레임으로 현재 인코딩 하려는 프레임의 각 MB안에 4-corner에 존재하는 픽셀들에 대한 backward dependency를 적용함으로써 오염된 MB을 찾아낼 수가 있다. 이들 오염된 MB들에 대한 INTRA코딩을 적용함으로써 에러확산을 완전히 중단시킬 수 있다. 이와 같이 빠른 알고리즘의 적용으로 보다 적은 연산량과 보다 적은 양의 메모리 요구를 얻을 수 있다 또한 이러한 장점은 실시간 비디오 전송에 특히 적합하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.249-251
• /
• 1994

This paper introduces an implementation of high performance voltage source inverter system based on 16bit micro-processor and DSP for the application to modem rolling stock traction system. In contrast with other industry oriented inverter system, this system requires precise control action complying with various load condition and high overload capability. An asynchronous PWM generation and 3' pulse mode technology are adopted in order to improve compliant starting torque characteristics at starting phase and soft backward-forward starting motion.