• Journal of the Korean Chemical Society
• /
• v.23 no.6
• /
• pp.412-416
• /
• 1979

Although isotactic polypropylene gives an excellent fiber having high tenacity, abrasion resistance and chemical stability, it has not been widely used as a fabric for chlothing because of its poor dyeability. A number of methods for improvement of its dyeability have been proposed, but they were too complicated and/or gave damage its original excellent properties of polypropylene. We now wish to report the synthesis of a new reactive dye for polypropylene fiber by means of carbenic process. A reactive dye was synthesized from azo disperse dye having an aldehyde group and tosylhydrazine. By using this synthesized reactive dye, polypropylene fiber was dyed to thick and fast color.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.9
• /
• pp.917-925
• /
• 2006

The aim of our research was to apply experimental design methodology in the optimization of photocatalytic degradation of azo dye(Reactive orange 16). The reactions were mathematically described as a function of parameters amount of $TiO_2(x_1)$, and dye concentration($x_2$) being modeled by the use of the Box-Behnken method. The results show that the responses of color removal(%)($Y_1$) in photocatalysis of dyes were significantly affected by the synergistic effect of linear term of $TiO_2(x_1)$ and dye concentration($x_2$). Significant factors and synergistic effects for the $COD_{Cr}$, removal(%)($Y_2$) were the linear term of $TiO_2(x_1)$ and dye concentration($x_2$). However, the quadratic term of $TiO_2(x_1^2)$ and dye concentration($x_2^2$) had an antagonistic effect on $Y_1$ and $Y_2$ responses. Canonical analysis indicates that the stationary point was a saddle point for $Y_1$ and $Y_2$, respectively. The estimated ridge of maximum responses and optimal conditions for $Y_1:(X_1,\;X_2)$=(1.11 g/L, 51.2 mg/L) and $Y_2:(X_1,\;X_2)$=(1.42 g/L, 72.83 mg/L) using canonical analysis was 93% and 73%, respectively.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.316-325
• /
• 2018

Aluminum based metal-organic framework using a di-carboxylate linker succinic acid (Al-SA MOF), are synthesized in water with minimal generation of secondary pollutants. The physicochemical properties of Al-SA MOF were examined, followed by its utility for the adsorption of Acid Black 1 (AB1) in aqueous media. Influences of key parameters such as pH, contact time, initial AB1 concentration,temperature, and selectivity on the adsorption process were assessed. A series of adsorption mechanisms are proposed, which involve electrostatic, hydrogen bonding, and hydrophobic interactions. These findings suggest that Al-SA MOF is a potent candidate in removing complex azo dyes molecules from aqueous media.

• The Korean Journal of Mycology
• /
• v.26 no.1 s.84
• /
• pp.8-15
• /
• 1998

The present research was undertaken to investigate the activity of ligninolytic enzymes and the decolorization capability of some dyes with Irpex zonatus BN2, isolated from nature and identified. For the assay of enzyme activities, the isolate did not produce lignin peroxidase (LiP) and veratryl alcohol oxidase (VAO), but laccase and manganese dependent peroxidase (MnP). While the activity for MnP was low $(61.6\;nmol/mg{\cdot}protein)$, its laccase activity was very high $(1185.9\;nmol/mg{\cdot}protein)$. Moreover, laccase had appeared earlier than MnP. When the isolate was incubated with each dye for 10 days, the decolorization rates of azo dyes, such as orange II, orange G, tropaeolin O and congo red were 98.0%, 97.4%, 99.0% and 95.3%, respectively. In case of heterocyclic dyes, eosin Y, toludine blue, methyl blue and azur B were 97.4 %, 98.7%, 99.9% and 94.0% respectively. Finally the results of triphenylmethane dye such as basic fuchsin, malachite green and crystal violet were 98.5%, 95.7% and 99.4%, respectively. The results suggest that laccase of Irpex zonatus BN2 should be played an important role in the decolorization of the dyes.

• Korean Journal of Microbiology
• /
• v.33 no.4
• /
• pp.252-256
• /
• 1997

The white rot fungus Coriolus hiysutus decolorized several recalcitrant dyes. Four different types of dyes, including azo, triphenyl methane, heterocyclic, and polymeric dye, were treated by the mycelial preparation. Triphenyl methane dye, bromophenol blue lost over 95% of its color. Congo red and Poly R-478 were decolorized less than bromophenol blue, 57 and 55%, respectively. However, heterocyclic dye, methylene blue was not decolorized significantly and only red shift was observed. Extracellular laccase and peroxidase activities were appeared maximally in high level of dye decolorization media. In electrophoretic experiments, common active bands of laccase and peroxidase were found in all dye decolorized medium. These results indicated that the culture conditions which yield high levels of laccase and peroxidase activity lead to high levels of dye decolorization, and these two enzymes might be play an important roles in dye decolorization.

• Textile Coloration and Finishing
• /
• v.32 no.4
• /
• pp.217-225
• /
• 2020

In this study, the dyeing characteristics of nylon fabric which is dyed with supercritical fluid were investigated. There were two dyes used in the dyeing experiment: C.I. Disperse Red 167 and C.I. Disperse Violet 93. Dyeing temperature, pressure, and leveling time were fixed at 110℃, 250bar, 60minutes, and the experiment was conducted with dyeing concentration of 0.1, 0.3, 0.5, and 0.85% o.w.f. The analysis of the experimental results was found out through the measurement of washing fastness and color coordinate. In addition, the calibration curve of each dye was drawn up and the amount of remaining dye was checked by measuring the absorbance of the residual dye. As a result of color difference measurement, as the concentration increased, the L⁎ value decreased and the K/S value increased. However, the increase in K/S value compared to the amount of input decreased as the concentration increased. The comparative experiment on the amount of residual dye(C.I. Disperse Red 167) in the pot showed that 99.14% of the amount was dyed at the concentration of 0.1% o.w.f, while it rapidly decreased to 77% at 0.85% o.w.f. C.I. Disperse Violet 93 dye also decreased from 0.5% o.w.f to 93.91%. In the washing fastness experiment of both dyes, the level of washing fastness began to decrease from samples dyed at 0.5% o.w.f. It may be because the simply absorbed dye was produced instead of completely being fixed in the amorphous region of the nylon fiber.

• Journal of Photoscience
• /
• v.12 no.1
• /
• pp.17-23
• /
• 2005

Application of a new photocatalyst has been attempted to improve the efficiency and rates of photocatalytic degradation of azo dyes by using a model dye such as Methyl Orange. As a new photocatalyst, $TiO_2$ encapsulated EFAL-removed zeolite Y ($TiO_2$ /EFAL-removed zeolite Y) has been synthesized by ion-exchange in the mixture of EFAL-removed zeolite Y with 0.05 M aqueous [$(NH_4)_2 TiO(C_2O_4)_2.H_2O$] [$TiO(C_2O_4)_2.H_2O$]. This new photocatalyst has been characterized by measuring XRD, IR and reflectance absorption spectra as well as ICP analysis, and it was found that the framework structure of $TiO_2$ /EFAL-removed zeolite Y is not changed by removing the extra-framework aluminum (EFAL) from the normal zeolite Y and the $TiO_2$ inside the photocatalyst exists in the form of $(TiO^{2+})_n$ nanoclusters. Based on the ICP analysis, the Si/Al ratio of the $TiO_2$ /EFAL-removed zeolite Y and the weight of $TiO_2$ were determined to be 23 and 0.061g in 1.0g photocatalyst, respectively. It was also found that adsorption of the azo dye in the $TiO_2$ /EFAL-removed zeolite is very effective (about 80 % of the substrate used). This efficient adsorption contributes to the synergistic photocatalytic activities of the $TiO_2$ /EFAL-removed zeolite by minimizing the required flux diffusion of the substrate. Thus, the photocatalytic reduction of methyl orange (MO) was found to be 8 times more effective in the presence of $TiO_2$ /EFAL-removed zeolite Y than in the presence of $TiO_2$ /normal zeolite Y. Furthermore, the photocatalytic reduction of MO by using 1.0 g of the $TiO_2$ /EFAL-removed zeolite Y containing 0.061g of $TiO_2$ is much faster than that carried out by using 1.0 g of Degussa P-25.

• Textile Coloration and Finishing
• /
• v.31 no.3
• /
• pp.135-146
• /
• 2019

A series of azo based disperse dyes were synthesized and applied to polyester(PET) fiber in supercritical carbon dioxide($ScCO_2$). Various aniline derivatives were used as diazo component and coupled with glycine ethylester or carbonic acid ethylester derivatives to give azo based disperse dyes. Depending on the various diazo substituents, absorption maxima varied from 415 to 529nm in acetone. Dyeing in $ScCO_2$ was carried out at $120^{\circ}C$ and 250bar pressure for 2hrs with 0.5% o.w.f. of dye concentration. Dyed PET fiber had excellent brightness and good light, washing and perspiration(acid/alkali) fastness properties.

• Textile Coloration and Finishing
• /
• v.33 no.2
• /
• pp.49-63
• /
• 2021

In this study, a convenient approach for sensitive, quick and simple detection of hazardous acids was investigated. A series of azo dyes were synthesized and applied as a chemosensor for the acid detection both on fibers and in solution. Various aniline, benzothiazole or isoxazole derivatives were used as diazo component and coupled with N-benzyl-N-ethylaniline or 2,2'-(phenylimino)bis-ethanol to give azo based dyes. The acid sensing phenomenon was observed by naked-eye and detection was further confirmed by UV-Vis spectrophotometer and hue difference(ΔH^*) evaluation. The developed sensors showed a distinct and quick color change from yellow to magenta by addition of trace amounts of the hazardous acids. The absorption maxima was shifted to a longer wavelength by 70 ~ 150nm and hue difference(ΔH^*) was 60 ~ 120°. A cotton fiber coated with Dye 1 exhibited excellent storage stability under various temperature(-30 ~ 43℃) and humidity(30 ~ 80%) conditions without discoloration and fading of the fiber sensors. Also the acid sensing properties were maintained.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2001.11a
• /
• pp.97-98
• /
• 2001

Acid Orange 7과 Methyl Orange의 경우, UV 빛을 조사하고 $TiO_2$ powder를 투여하였을 때 120분 이내에 탈색이 완전히 이루어짐으로써 색도를 80% 이상 제거할 수 있었다. 광촉매량이 증가할수록 촉매표면적이 증가하여 광반응 속도의 증가를 가져오나, 과도한 촉매량의 투입은 오히려 UV 빛의 효과적인 투과를 방해함으로써 광반응 속도를 감소시킨 것으로 사료된다. 초기 pH는 반응 속도에 큰 영향을 미치지 못하는 것으로 나타났으며, Orange II는 Methyl Orange보다 초기 pH에 다소 큰 영향을 받았다. 초기 농도가 낮을수록 초기 반응 속도는 증가하여 염료 분해 속도가 빠름을 알 수 있었다.