Abstract
The aim of our research was to apply experimental design methodology in the optimization of photocatalytic degradation of azo dye(Reactive orange 16). The reactions were mathematically described as a function of parameters amount of $TiO_2(x_1)$, and dye concentration($x_2$) being modeled by the use of the Box-Behnken method. The results show that the responses of color removal(%)($Y_1$) in photocatalysis of dyes were significantly affected by the synergistic effect of linear term of $TiO_2(x_1)$ and dye concentration($x_2$). Significant factors and synergistic effects for the $COD_{Cr}$, removal(%)($Y_2$) were the linear term of $TiO_2(x_1)$ and dye concentration($x_2$). However, the quadratic term of $TiO_2(x_1^2)$ and dye concentration($x_2^2$) had an antagonistic effect on $Y_1$ and $Y_2$ responses. Canonical analysis indicates that the stationary point was a saddle point for $Y_1$ and $Y_2$, respectively. The estimated ridge of maximum responses and optimal conditions for $Y_1:(X_1,\;X_2)$=(1.11 g/L, 51.2 mg/L) and $Y_2:(X_1,\;X_2)$=(1.42 g/L, 72.83 mg/L) using canonical analysis was 93% and 73%, respectively.
[ $TiO_2/UV$ ] system에서 azo dye 중 반응성 염료의 광촉매 산화분해에 대한 연구를 수행하였다. 광촉매 산화공정은 다양한 인자에 의해 영향을 받으며 이런 인자들의 산화반응에서 효과 및 특성을 파악하고 예측식 모형을 추정하기란 매우 힘든 작업이다. 따라서 본 연구는 실험계획법 중 박스-벤켄법(Box-Behnken method)을 이용하여 2인자 3수준의 실험디자인으로 최적의 산화조건을 찾기 위한 실험을 수행한 결과는 다음과 같다. 본 실험에서 색도 제거율($Y_1$)의 반응모형에 가장 크게 영향을 끼치는 항은 주 효과(선형효과)와 교차항으로 나타났고 그 중 $x_2$(dye concentration)가 가장 민감하게 반응모형에 영향을 받는 것으로 확인되었다. $COD_{Cr}(Y_2)$의 반응모형의 경우 $Y_1$의 모형과 마찬가지로 주 효과(선형효과) 및 교차항이 모델의 생성에 가장 중요한 모수로 작용하였지만 $Y_1$와 달리 $x_1(TiO_2)$ 및 $x_2$(dye concentration) 모두 반응 모형에서 민감하게 서로 상호작용하며 영향을 주었다. 최적의 산화조건을 찾기 위해 정준분석 중 능선분석을 수행한 결과 $Y_1:(X_1,\;X_2)$=(1.11 g/L, 51.2 mg/L), $Y_2:(X_1,\;X_2)$=(1.42 g/L, 72.83 mg/L)의 결과를 얻을 수 있었고 모형의 검증결과 매우 높은 신뢰성을 보였다.