• Atmosphere
• /
• v.32 no.4
• /
• pp.323-340
• /
• 2022

We analyzed the high-resolution wind data of Aircraft-Based Observation from the Mode-Selective Enhanced Surveillance (Mode-S EHS) data in Korea. For assessment of its quality, the Mode-S wind data was compared with the ECMWF ReAnalysis 5 (ERA5) reanalysis and Aircraft Meteorological Data Relay (AMDAR) data for more than 3-months from 7 May 2021 to 24 August 2021 near Incheon International Airport, Korea. Considering that the AMDAR reports are not provided by all commercial aircraft, total number of the Mode-S derived wind data with a second sampling rate was about twice larger than that of available AMDAR wind data. After the quality control procedures by removing erroneous samples, it was found that the root mean square errors (RMSEs) of the Mode-S retrieved winds are similar to that from the AMDAR winds. In particular, between 550 and 650 hPa levels, RMSE of the Mode-S (AMDAR) zonal wind against ERA5 data was about 2.3 m s^-1 (1.9 m s^-1), and those increased to 3.3 m s^-1 (2.4 m s^-1) in 200~500 hPa levels. A similar trend was found in the meridional wind, but a distinct positive mean bias of 2.16 m s^-1 was observed between 875 and 1,000 hPa levels. Winds retrieved from the Mode-S also showed a good agreement directly with AMDAR data. As the Mode-S provides a large amount of data with a reliable quality, it can be useful for both data assimilation in the numerical weather prediction model and situational awareness of wind and turbulence for aviation safety in Korea.

• New Physics: Sae Mulli
• /
• v.68 no.11
• /
• pp.1268-1274
• /
• 2018

Aircraft-warning lights are lights that are used to inform pilots in flight about the presence of buildings or dangerous objects. Currently, the light sources of most aircraft-warning lights have been replaced by light-emitting diodes (LEDs). However, the aircraft-warning lights that are installed do not meet the optical performance standards and may cause airplane collisions. Therefore, the use of such light poses a risk to aviation safety. In order to solve this problem, we designed a Fresnel lens with the same luminous intensity distribution ovef $360^{\circ}$ direction; thus, we collimated the light beam from the LED light source with a narrow beam divergence angle in the form of an array of aspheric pieces. After that, we designed and simulated an aircraft-warning-light optical system with a center luminous intensity of 20,000 cd and a vertical divergence angle of $3^{\circ}$ or more by optimizing the lens' tilt and the distance between the LED and the Fresnel lens.

• Journal of Aerospace System Engineering
• /
• v.16 no.3
• /
• pp.35-41
• /
• 2022

UAM (Urban Air Mobility) is a new safe, secure, and more sustainable air transportation system for passengers and cargo in urban environments. Commercial operations of UAM are expected to start in 2025. Since production rates of UAM are expected to be closer to cars than conventional aircraft, the airworthiness methodology for UAM must be prepared for mass production. Composite materials are expected to be mainly used for UAM structures to reduce weight. In this paper, the composite material qualification method was derived and the materials were applied for small aircraft application. It is expected to reduce the airworthiness certification time by applying composite material qualification system and its database.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.338-343
• /
• 2022

The Air Radio Station plays a role in creating skyways for aircraft and helping them fly safely through aviation mobile communication facilities (U/VHF transceivers) and various navigation safety facilities. It is necessary to remove large trees and weeds around the aircraft because accurate and safe signals must be provided without interruption. During the mowing work for the efficient management of landscaping facilities, there have been cases in which noise is introduced by Lawn Mower, which hinders control work. Accordingly, in order to analyze how mower affects air mobile communication facilities, the interference effect on air mobile communication facilities was analyzed for four types of mower, two-stroke, and battery type. As a result of the analysis, it was found that the two-stroke mower greatly affects air mobile communication facilities.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.20-29
• /
• 2021

As the feasibility of urban air mobility (UAM) service using electric vertical take-off and landing (eVTOL) aircraft increases due to aircraft electrification, distributed propulsion, and artificial intelligence technologies, the U.S. and European aeronautical societies have been improving their certification system and regulations for the type certification of eVTOL. The improved certification system is expected to be ready in the near future, after the European Union Aviation Safety Agency (EASA) proposed the VTOL Special Condition, SC-VTOL in 2019. However, the current domestic certification system is still insufficient to properly respond to eVTOL. This study investigated the development trends of foreign eVTOL and certification systems, identified considerations to improve the domestic certification system, and proposed the measures for type certificates and type certificates validation of eVTOL based on the comparison between SC-VTOL and Korea airworthiness standards (KAS).

• Tribology and Lubricants
• /
• v.38 no.5
• /
• pp.179-184
• /
• 2022

The power train of transmission for 21-ton grade wheel excavator makes use of a complex gear train composed of a planetary and helical gear system to drive the wheel excavator by transmitting power to the axle. The complex gear train with a shift mode is an important part of the transmission because of strength problems in an extreme environment. To calculate the specifications of the complex gear train and analyze the gear bending and compressive stresses of the complex gear train, this study analyzes gear bending and compressive stresses accurately for the optimal design of the complex gear train with respect to cost and reliability. In this article, the gear bending and compressive stresses of the complex gear train are calculated using the Lewes and Hertz equation. Evaluating the results with the data of the allowable bending and compressive stress from the stress and number of cycles curves of the gears verified the calculated specifications of the complex gear train. A computer structure analysis is performed with the 3D model of the planetary and helical gears to analyze the structure strength of the complex gear train. The results demonstrate that the durability and strength of the complex gear train are safe, because the safety factors of the bending and compressive stresses are more than 1.0.

• Journal of Aerospace System Engineering
• /
• v.17 no.1
• /
• pp.16-23
• /
• 2023

The aircraft fuel system performs a number of functions such as supplying fuel, transferring fuel between fuel tanks, and measuring the amount of residual fuel in each fuel tank. Since it is a direct cause of fire hazard in crash incident, it is a must to improve survivability of crew members by designing the airframe to tolerate expected crash impact. The civil aviation authority requires intensive verification of the fuel system design to determine precise application of the airworthiness requirement. Research activity on airworthiness certification criteria and verification scheme is still insufficient, although it has a significant importance. In this paper, as part of a study to improve flight safety by developing guidelines for demonstrating fuel system crash resistance, analysis results of fuel system crash-related airworthiness certification standards, verification scheme, and cases study applicable to military rotorcraft have been reviewed.

• Journal of Advanced Navigation Technology
• /
• v.27 no.3
• /
• pp.293-299
• /
• 2023

UPRT(Upset Prevention And Recovery Training) is an accident prevention training program developed over a three-year period after the main cause of aircraft accidents in commercial aviation between 2001 and 2011 was analyzed as LOC-I(Loss Of Control Flight). In 2014, ICAO presented UPRT for fixed-wing aircraft through Doc.10011(Manual On Aeroplane Upset Prevention And Recovery Training) and recommended mandatory implementation to Contracting States from March 2019. Since naval P-3C is a major mission of maritime patrol and anti-submarine warfare, it takes a lot of time to fly at low altitude (70-600 m), and the majority of P-3C pilots have experienced spatial disorientation, so Upset prevention and recovery training is essential for naval P-3C pilots. To this end, this study intends to present measures for UPRT from limited conditions using the P-3C simulator owned by the Navy.

• Journal of the Korean Society of Systems Engineering
• /
• v.19 no.1
• /
• pp.64-78
• /
• 2023

This paper introduces urban air mobility (UAM) and the definition and types of vertiports required for UAM operations. It also examines domestic policy trends related to UAM and identifies UAM routes in Seoul currently planned by the government. To do so, we reviewed prior research on vertiports, analyzed new regulations from the European Aviation Safety Agency, and studied domestic vertiport specifications and deployment plans for UAM operations based on the size of the S-A1 airframe being developed by Hyundai, and applied them to Samsung Station, the core area of the demonstration routes. Next, using the 'Travel Time Savings Ratio', a method for evaluating transportation economics, we compared and analyzed the time taken by passenger vehicles and the time saved by using UAMs to derive a highly economical demonstration route. As a result, the Samsung Station↔Cheongnyangri Station section was found to be the most efficient. These findings are expected to be utilized for adjusting the distribution of UAMs when operating the demonstration route in the future.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.2
• /
• pp.47-56
• /
• 2023

This study identified the core competencies of aircraft maintenance quality engineers and compared the importance and retention of core competencies. Through literature research, 21 core competencies were derived in three areas of management technology, elemenal technology and collaboration technology, and a survey was conducted on the importance and retention of core competencies for 42 aircraft maintenance quality engineers. As a result of the survey, the importance of all core competencies of aircraft maintenance quality engineers is 3.95/5 on average, and the retention of all core competencies is 3.99/5 on average. 'Risk Management', 'Creating Document', 'Honesty/Moral' were identified as the most important competencies in each area, and 'Quality Management', 'Language', 'Honesty/Moral' were identified as the most possessed competencies in each area. An IPA (Importance-Performance Analysis) was performed to analyze the details. Through IPA, 'Risk Management' and 'Safety Management' were evaluated as having a low degree of retention compared to a high level of importance. Therefore, they were identified as a core competencies that need to be improved first. In addition, the characteristics of each core competency and the recognition level in the field were also identified. This study will be helpful in defining the roles and functions of aircraft maintenance quality engineers to improve flight quality and prevent aviation accidents.