• 핵의학기술
• /
• 제14권2호
• /
• pp.197-202
• /
• 2010

목적: 각 검사실에서는 임상의 신속한 검사 결과 보고 요청에 부응하고 검사 결과의 신뢰도 및 효율성을 증가시키기 위해 자동화 장비를 많이 사용한다. 국산 자동화 장비는 기존 자동화 장비의 단점을 개선, 보완하여 폭넓은 수행능을 가진 국산 자동화 장비이다. 본 연구에서 국산 자동화 장비와 기존 자동화 장비와의 상관성 및 분석능력을 평가하여 검사실에서의 결과보고시간 단축에 대한 유용성과 신뢰성을 알아보고자 하였다. 대상 및 방법: 2009년 9월 삼성서울병원에서 갑상선 호르몬 검사(TT3, TSH, FT4)가 의뢰된 환자를 대상으로 저농도에서 고농도 검체 100개씩 국산 자동화 장비와 RIA-mat 280을 사용하여 상관성을 알아보았다. 국산 자동화 장비의 부분별 평가로 첫째, Tip부분은 정확도, 회수율, 검체 간 상호 오염도를 측정하였다. 둘째, Incubator부분은 회전수(RPM)와 회전축 원경(mm)에 따른 최적의 검사반응 조건을 알아보았다. 검체처리 속도를 분석하기 위해 특정기간의 검사결과 보고시간을 조사하였다. 결과: 국산 자동화 장비와 RIA-mat 280의 상관계수($R^2$)는 TT3 0.98, TSH 0.99, FT4 0.92로 좋은 상관관계를 보였다. Tip의 평가로 정밀도 CV 0.38 %(1번 Tip), CV 0.39 %(2번 Tip), 정확도 98.3 %(1번 Tip), 98.6 %(2번 Tip). 검체 간 상호 오염도는 0.01 %(1번 Tip), 0 %(2번 Tip)로 검체 간 상호 오염도가 거의 없었다. Incubator 조건에서 회전수(RPM)와 회전수 원경(mm) 500 RPM의 1.0 mm, 1.5 mm와 600 RPM의 1.0 mm, 1.5 mm 중 600 RPM의 1.0 mm가 최상의 조건임을 알 수 있었다. 기존의 자동화 장비에서 6회/일 시행되던 검사가 최대20회/일로 늘어남으로써 검체 접수에서 결과보고까지 소요시간이 평균 4.20시간에서 평균 2.19시간으로 약 2시간 단축되었다. 결론: 국산 자동화 장비(Gamma Pro) 사용으로 결과보고 시간이 평균 2.19시간으로, 약 2시간 단축되는 결과를 얻었다. 본 기기는 일정시간당 대량 검체 처리능력이 뛰어나고 실용성을 갖춘 효율적인 장비라고 여겨진다. 검사결과 보고 시간 단축으로 인해 응급환자의 신속한 진단과 외래환자의 진료대기시간 단축에 유용할 것이다.

• 드라이브 ㆍ 컨트롤
• /
• 제8권2호
• /
• pp.57-63
• /
• 2011

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.204-206
• /
• 2005

The development of control related applications requires knowledge of different subject matters like mechanical components, control equipment and physics. To understand the behavior of these heterogeneous applications is not easy especially the students who begin to study the electronic engineering.

• 식품과학과 산업
• /
• 제47권3호
• /
• pp.50-56
• /
• 2014

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권1호
• /
• pp.78-101
• /
• 2017

High-quality industrial control is critical to ensuring production quality, reducing production costs, improving management levels and stabilizing equipment and long-term operations. WiFi-based Long Distance (WiLD) networks have been used as remote industrial control networks. Real-time performance is essential to industrial control. However, the original mechanism of WiLD networks does not minimize end-to-end delay and restricts improvement of real-time performance. In this paper, we propose two algorithms to obtain the transmitting/receiving phase cycle length for each node such that real time constraints can be satisfied and phase switching overhead can be minimized. The first algorithm is based on the branch and bound method, which identifies an optimal solution. The second is a fast heuristic algorithm. The experimental results show that the execution time of the algorithm based on branch and bound is less than that of the heuristic algorithm when the network is complex and that the performance of the heuristic algorithm is close to the optimal solution.

• 한국전자통신학회논문지
• /
• 제7권6호
• /
• pp.1519-1527
• /
• 2012

본 논문에서는 온실의 상황을 실시간으로 체크하여 온실의 환경을 최적의 상태로 유지하도록 하고, 또한 사용자가 원하는 환경에 대하여 필요한 장비를 수동모드로 변환하여 일시적으로 작동시킬 수 있도록 온실 자동화 시스템을 구현하였다. 온실에서 수집된 환경 데이터는 모니터링 컴퓨터로 전송되는 것은 물론, 웹을 통하여 즉시적인 제어가 가능하도록 웹 기반 시스템이 지원된다. 사용자는 웹 기반 시스템을 이용하여 온실의 상황을 실시간으로 확인이 가능하며, 온실 환경에 대한 조건을 정하여 자동화 기능을 유지할 수 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.940-945
• /
• 2004

Recently, the trend in architectural forms has been toward taller and larger building. The building materials, therefore, are getting larger and heavier as wall. Most of the construction projects are, however, dependent on outdated equipment and human resources. Construction processes up to now face a number of problems, including dangerous work, high construction cost and heterogeneous construction quality. In various construction sites, automation in construction has been introduced to address these problems. This paper proposes a human-machine cooperative system in the construction site; the system utilizes construction of a curtain wall in tall buildings. The use of automation system at construction sites can reduce the need of human involvement. Construction time and cost can be reduced as well. The most important aspect of the use of automation system at construction sites is prevention of accidents.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.289-299
• /
• 2018

Electric-field coupled power transfer (ECPT) systems employ a high frequency electric field as an energy medium to transfer power wirelessly. Existing ECPT systems have made great progress in terms of increasing the transfer distance. However, the topologies of these systems are complex, and the transfer characteristics are very sensitive to variations in the circuit parameters. This paper proposes an ECPT system with a double-sided LC network, which employs a parallel LC network on the primary side and a series LC network on the secondary side. With the same transfer distance and output power, the proposed system is simpler and less sensitive than existing systems. The expression of the optimal driving voltage for the coupling structure and the characteristics of the LC networks are also analyzed, including the transfer efficiency, parameter sensitivity and total harmonic distortion. Then, a design method for the system parameters is provided according to these characteristics. Simulations and experiments have been carried out to verify the system properties and the design method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.511-512
• /
• 2007

The monitoring system has won acceptance as a premium mark that identifies the highest standard of product quality in advanced industry. The TOP features with multi-I/O ports and VGA & RCA TV-out ports supporting mirroring & multiple dual-display modes by windows 0/5. With the choice of versatile stands, panel mount, or VESA wall-mount swing arm and connecting to modem. Wireless keyboard, Customer Display and Card Reader, is your idea Panel system for the application of TOP(Touch Operation Pannel), KIOSK, or Office / Factory Automation. TOP is the hardware and software product that transacts all kind of functions for advanced technology equipment to button, switch, voice and graph etc so that let consumer use easily Industrial HMI System Touch Panel. System characteristics: Easy of use and flexibility to the user, Present a high value solution and advanced function for many Application, Factory Automation, Office Automation, Building Automation System, Information Service System, etc. Analog Touch - 2MB Flash Memory for Saving Screen Data - RS-232C/422 Serial Port - Multi Language Support.

• ETRI Journal
• /
• 제43권1호
• /
• pp.40-52
• /
• 2021

DNS (Domain Name System) tunnels almost obscure the true network activities of users, which makes it challenging for the gateway or censorship equipment to identify malicious or unpermitted network behaviors. An efficient way to address this problem is to conduct a temporal-spatial analysis on the tunnel traffic. Nevertheless, current studies on this topic limit the DNS tunnel to those with a single protocol, whereas more than one protocol may be used simultaneously. In this paper, we concentrate on the refined identification of two protocols mixed in a DNS tunnel. A feature set is first derived from DNS query and response flows, which is incorporated with deep neural networks to construct a regression model. We benchmark the proposed method with captured DNS tunnel traffic, the experimental results show that the proposed scheme can achieve identification accuracy of more than 90%. To the best of our knowledge, the proposed scheme is the first to estimate the ratios of two mixed protocols in DNS tunnels.