• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.258-261
• /
• 1989

This paper presents a new algorithm of the operation on power distribution system by automated distribution system (ADS). A performance of this automated algorithm is established to operate the distribution system faster than earlier. We reduced the time and area of power failure by using automation algorithm on ADS.

• 한국시뮬레이션학회논문지
• /
• 제15권3호
• /
• pp.103-114
• /
• 2006

최근의 자동물류센터는 자동창고(ASRS)와 자동주행대차(AGV)를 중심으로 각종 컨베이어시스템과 운반장치 등으로 구성되면서 매우 복잡한 시스템 형태를 갖게 되었다. 이러한 시스템의 복잡성에 기인하여 시스템 설계과정에서의 정확한 운영 수행도 파악을 위해서는 많은 종류의 설계변수들이 고려되어야 한다. 물류센터 설계에서 고려해야할 일반적인 설계 변수로는 보관설비 및 운반설비의 사양과 여러 가지 시스템 운영 규칙, 보관영역이나 보관물의 형태 등이 있다. 이 논문에서는 자동화물류센터에 대하여 시뮬레이션 실험과 반응표면모델을 이용하여 메타모델을 만들고 이를 통하여 설계변수들을 최적화하는 효율적인 방법에 대하여 소개 하고자 한다. 정확하게 정의된 시뮬레이션 기반의 메타모델은 시스템 함수의 근사적 표현으로서 수리적 계산을 통해 신속한 설계변수 최적화를 가능하게 한다. 이 논문에서 제시한 접근 방법은 자동물류센터와 같은 복잡한 물류 시스템의 설계 단계에서 시뮬레이션의 설계 참여도를 극대화시키고 최종 설계의 정확도를 향상시키는데 기여 할 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1079-1081
• /
• 1999

This paper presents the standard for dividing/tieing the distribution lines and installing optimally the automated distribution switch-gear in multi-line faults. Also this paper recommends the distribution system design in consideration of the live load transfer of the concentrated load in the last load-side. This recommendation will be useful for designing the distribution network, developing the feeder automation software and operating the distribution automation system.

• 한국안전학회지
• /
• 제25권2호
• /
• pp.78-83
• /
• 2010

An installation of automated speed enforcement system(ASES) was known for traffic safety and accident preventive effects that traffic characteristics transmute by speed distribution stabilizing. This study is verified the variations of average speed, 85% speed, speed distribution and dispersion as traffic characteristics depend on enforcement system influences in the road. We tested selected 5 areas. By and large, it has a little differences depend on road geometric structure and traffic environment but that is not too much. After all, after automated speed enforcement system installed in all of test areas, average speed, 85% accumulated speed, speed distribution and dispersion characteristics were declined and equalized. The speed dispersion was smaller than before installed the ASES. The speed dispersion value of each case that is the limited speed has been 70Km/h, 80Km/h at flat and straight, 80Km/h at downhill and straight or downhill and left-curved area was 77.3%, 65.2%, 68.7% and 54.1%. Each of the data was declined. We could analyze that average speed distributed depletion factor was declined rapidly by 66.3% in test area.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1991년도 춘계공동학술대회 발표논문 및 초록집; 전북대학교, 전주; 26-27 Apr. 1991
• /
• pp.281-281
• /
• 1991

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1998년도 추계학술대회논문집:21세기에 대비한 지능형 통합항만관리
• /
• pp.51-58
• /
• 1998

This study is to define the Automated Container Terminal(ACT) and container terminal system. Also, we analyze the present condition of the container terminal system in Pusan port and its automation level by systems approach. And this paper aims at evaluating on the priority of R&D investment until the beginning of the second stage of New Pusan Port Project(2006). In this process we have considered 8 factors (cost, labor, area, time volume, reliability, safety, convenience) to analyze 6 subsystems. The priority order of R&D until target year by sub-systems is as follow : Cargo Handling System〉Transfer System〉Port Entry System〉Storage System(Distribution&Manufacturing System included)〉Inland Transport System〉Port Information System.

• KIEE International Transactions on Power Engineering
• /
• 제2A권3호
• /
• pp.102-108
• /
• 2002

Due to the many attractive aspects of DG in the future power distribution system, distribution automation will be a center hub of integration of the distribution system and resources to satisfy the various needs of customers in a competitive and deregulated environment. In this paper, operation strategies are presented which use network reconfiguration of the automated distribution systems with DG as a real-time operation tool for loss reduction and service restoration from the view of distribution operation. The algorithms and operation strategies of an automated distribution system with DG are introduced to achieve the positive effects of DG in distribution systems. A simple case study shows the effectiveness of the proposed operation strategies.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.557-561
• /
• 1989

This paper presents a new operation method on power distribution system by automated distribution system (ADS). A performance of this automation is established to operate the distribution system faster than earlier. We reduced the period and region of power failure by ADS.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.107-112
• /
• 1990

It is necessary to develop graphic MMI (Man-Machine Interface) for the maximum utilization of our installed ADS (Automated Distribution System) for which an operator types and executes string commands. Considering the restrictions and characteristics of the installed ADS and the data for modelled distribution lines, we calculated the time of periodic data acquisition for large number of points. And we presented the performance and characteristics of the graphic MMI system which will be developed and which will facilitate SCADA(Supervisory Control And Data Acquisition) functions.

• Industrial Engineering and Management Systems
• /
• 제6권2호
• /
• pp.125-135
• /
• 2007

An automated guided vehicle (AGV) system is a group of collaborating unmanned vehicles which is commonly used for transporting materials within manufacturing, warehousing, or distribution systems. The performance of an AGV system depends on the dispatching rules used to assign vehicles to pickup requests, the vehicle routing protocols, and the home location of idle vehicles, which are called dwell points. In manufacturing and distribution environments which emphasize just-in-time principles, performance measures for material handling are based on response times for pickup requests and equipment utilization. In an AGV system, the response time for a pickup request is the time that it takes for the vehicle to travel from its dwell point to the pickup station. In this article, an exact dynamic programming algorithm for selecting dwell points in a tandem-loop multiple-vehicle AGV system is presented. The objective of the model is to minimize the maximum response time for all pickup requests in a given shift. The recursive algorithm considers time restrictions on the availability of vehicles during the shift.