• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.11
• /
• pp.840-846
• /
• 2002

The vibrational system of this study is consisted of a cantilever pipe conveying fluid, the moving masses upon it and an attached tip mass. The equation of motion is derived by using Lagrange equation. The influences of the velocity and the number of moving masses and the velocities of fluid flow in the pipe have been studied on the natural frequency of a cantilever pipe by numerical method. As the size and number of a moving mass increases, the natural frequency of cantilever pipe conveying fluid is decreased. When the first a moving mass Is located at the end of cantilever pipe, the increasing of the distance of moving masses make the natural frequency increase at first and third mode, but the frequency of second mode is decreased. The variation of natural frequency of the system is decreased due to increase of the number of a moving mass. The number and distance of moving masses effect more on the frequency of higher mode of vibration.

• Korean Journal of Veterinary Service
• /
• v.21 no.4
• /
• pp.407-411
• /
• 1998

Aspergillosis, caused by infection with Aspergillus fumigatus and less commonly by other Aspergillus species, is a prevalent and costly respiratory disease of poultry, In a flock of chicks, the number of birds, 4∼5 months old, had become gradually emaciated and subsequently died. Gross necropsy revealed multiple granulomatous masses on the abdominal serosa. The masses, 4∼15 mm in size, were attached on mainly intestinal wall. Also, the smaller masses in size were on mesentery and pancreas. However, only a few small white nodules were scattered throughout liver and lung in few samples. Microscopically, the mass were granulomatous with a central area of necrosis containing numerous septate, branched fungal hypae consistent with Aspergillus sp. These were surrounded by macrophages, giant cells, lymphocytes and fibrous tissues. Nodular lesions of liver and lung were seemed to spread hemotogenously from intestine and the possible route of infection was speculated by oral. This report is a Aspergillus-induced granuloma limited to the serosa of abdominal cavity, especially of intestinal wall.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1247-1252
• /
• 2007

The machine equipment of the building inside occurs the vibration. In order to reduce this vibration spring, rubber pad is used. But efficiency of this classical mount is restricted at specific frequency. Also maximum efficiency design is complicated. This paper proposes and examines a attached mass isolation system that is used to reduce transmitted vibrations from machines onto their floor support. With attached mass the low frequency performance is improved overall. The performance is showed in 2 degree of freedom model test. And the proposed isolator has been validated by dynamic test and good agreement between theoretical and experimental results has been obtained.

• Structural Engineering and Mechanics
• /
• v.28 no.1
• /
• pp.53-67
• /
• 2008

Anisotropic materials are increasingly required in modern technological applications. Certainly, civil, mechanical and naval engineers frequently deal with the situation of analyzing the dynamical behaviour of structural elements being composed of such materials. For example, panels of anisotropic materials must sometimes support electromechanical engines, and besides, holes are performed in them for operational reasons e.g., conduits, ducts or electrical connections. This study is concerned with the natural frequencies and normal modes of vibration of rectangular anisotropic plates supported by different combinations of the classical boundary conditions: clamped, simply - supported and free, and with additional complexities such holes of free boundaries and attached concentrated masses. A variational approach (the well known Ritz method) is used, where the displacement amplitude is approximated by a set of beam functions in each coordinate direction corresponding to the sides of the rectangular plate. Consequently each coordinate function satisfies the essential boundary conditions at the outer edge of the plate. The influence of the position and magnitude of both hole and mass, on the natural frequencies and modal shapes of vibration are studied for a generic anisotropic material. The classical Ritz method with beam functions as spatial approximation proved to be a suitable procedure to solve a problem of such analytical complexity.

• Structural Engineering and Mechanics
• /
• v.28 no.6
• /
• pp.659-676
• /
• 2008

The reports regarding the free vibration analysis of uniform beams carrying single or multiple spring-mass systems are plenty, however, among which, those with inertia effect of the helical spring(s) considered are limited. In this paper, by taking the mass of the helical spring into consideration, the stiffness and mass matrices of a spring-mass system and an equivalent mass that may be used to replace the effect of a spring-mass system are derived. By means of the last element stiffness and mass matrices, the natural frequencies and mode shapes for a uniform cantilever beam carrying any number of springmass systems (or loaded beam) are determined using the conventional finite element method (FEM). Similarly, by means of the last equivalent mass, the natural frequencies and mode shapes of the same loaded beam are also determined using the presented equivalent mass method (EMM), where the cantilever beam elastically mounted by a number of lumped masses is replaced by the same beam rigidly attached by the same number of equivalent masses. Good agreement between the numerical results of FEM and those of EMM and/or those of the existing literature confirms the reliability of the presented approaches.

• Korean Journal of Veterinary Service
• /
• v.30 no.4
• /
• pp.539-544
• /
• 2007

A 7-year-old intact female Golden Retriever was presented for examination. The dog had large irregular subcutaneous masses in the abdomen which were ruptured or encapsulated. Those were removed surgically. Histopathologically, the masses consisted of spindle cells that often formed distinct whorls around a central capillary. Immuno-histochemical analysis revealed that the neoplastic cells were strong diffuse cyto-plasmic immunolabelling for vimentin and focal immunoreactivity for smooth muscle actin, whereas not immunoreactive for cytokeratin, desmin, von Willebrand factor, glial fibrillary acidic protein, or S-100. The neoplastic cells ultrastructurally had processes attached by desmosome-like structures, swollen mitochondria and dilated rough endoplasmic reticulum. Based on the above results, this case was diagnosed as a canine hemangiopericytoma in the abdominal subcutis of a Golden Retriever.

• Fisheries and Aquatic Sciences
• /
• v.18 no.4
• /
• pp.395-399
• /
• 2015

We observed seasonality and other characteristics of spawning in the greenling Hexagrammos agrammus off the coast of Tongyeong. Eleven spawning grounds were identified between November, 2013 and January, 2014. The fertilized eggs of H. agrammus were assigned to developmental stages I, II, III, and IV. Based on this classification, we showed that the spawning season extended from the end of October to mid-January. H. agrammus used diverse seaweed species attached to shallow bedrock as spawning substrata that provided good camouflage. Two to seven egg masses were fertilized around the holdfasts of individual seaweeds at depths of 1.2-4.0 m. We identified species-specific reproductive traits of H. agrammus during the spawning season, including strong parental care of the fertilized eggs.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.6
• /
• pp.569-574
• /
• 2009

The paper presents the influences of the external damping and the tip mass on dynamic stability of a vertical cantilevered pipe conveying fluid. In general, real pipe systems may have some valves and attached mechanical parts, which can be regarded as attached lumped masses and support-dampers. The support-dampers can be assumed as viscous dampers. The equations of motion are derived by energy expressions using extended Hamilton's principle, and some numerical results using Galerkin's method are presented. Critical flow velocities and stability maps of the pipe with external dampers and tip mass are obtained for various tip mass ratios, external damping coefficients and positions of the viscous dampers.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1996.04a
• /
• pp.127-134
• /
• 1996

In this paper, the effect of neglecting the own weight of the composite plate on the natural frequency of vibration of the laminated plates is presented. The method used has been developed by the author since 1974. This method is very effective for the plates with arbitrary boundary conditions and irregular sections. When the attached mass is equal to the weight of the plate, the effect of neglecting the plate weight is 9.26 percent

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.465-468
• /
• 2005

The paper deals with the influences of external damping and tip mass on dynamic stability of a vertical cantilevered pipe conveying fluid. In general, real pipe systems may have some valves and attached parts, which can be regarded as attached lumped masses and support-dampers. The support-dampers can be assumed as viscous dampers. The equations of motion are derived by energy expressions using extended Hamilton's principle, and some numerical results using Galerkin's method are presented. Critical flow velocities and stability maps of the pipe with external dampers and tip mass are obtained for various tip mass ratios, external damping coefficients and positions of the viscous dampers.