• 제목/요약/키워드: arbitrary result

검색결과 402건 처리시간 0.025초

UNIVERSAL DISPERSION EQUATION FOR MAGNETOSTATIC WAVES(MSW)

  • Wenzhong, Hu
    • 한국자기학회지
    • /
    • 제5권5호
    • /
    • pp.383-386
    • /
    • 1995
  • A universal dispersion equation for magnetostatic waves(MSW) propagating in the film with arbitrary-multiple magnetic layers magnetized in an arbitrary direction was derived with a matching boundary condition method. The computing result curves of delay time were shown.

  • PDF

Arbitrary Lagrangian-Eulerian 기법에 의거한 콘 관입 해석 (An Analysis of Cone Penetration Based on Arbitrary Larangian-Eulerian Method)

  • Oh, Se-Boong
    • 한국지반공학회논문집
    • /
    • 제17권6호
    • /
    • pp.85-98
    • /
    • 2001
  • Arbitrary Lagrangian-Eulerian(ALE) 기법에 의거하여 콘 관입문제를 해석하였다. 완전한 관입을 모의하기 위하여 ABAQUS/Explicit을 이용하여 지반의 상향 유동을 모델링하는 정상상태해석(steady state analysis)을 수행하였다. 단일 지층의 해석에서는 흙 입자의 유동 경로와 변형률이 strain path method와 일관된 결과를 나타내고 있음을 확인하였고 극한저항을 합리적으로 계산할 수 있었다. 상이한 지층에 콘을 관입하는 경우에 대해서도 콘 저항이 전이하는 경향을 해석할 수 있었다. 따라서 ALE 해법의 정상상태해석으로 층상 지층에 대한 완전한 관입을 해석할 수 있었다.

  • PDF

열선 유속계에 대한 유체 온도의 보정 (The Correction of Fluid Temperature for Hot-wire Anemometer)

  • 심상학
    • 한국생산제조학회지
    • /
    • 제8권6호
    • /
    • pp.92-97
    • /
    • 1999
  • This paper reports by simple method that is quickly corrected the effects of fluid temperature for the hot wire anemometer. We are concerned with a variable output of hot wire anemometer on arbitrary fluid temperature. Hot wire by measuring boundary layer of turbulent flow has been calibrated by arbitrary temperature lower than 10$0^{\circ}C$, and velocity lower than 20m/s. As a result, we could pick up the temperature factor affected by output of hot wire anemometer from related in output of arbitrary temperature to output of room temperature. By using temperature factor on the output of hot wire anemometer, we also obtained that the relationship of velocity was of no effect by temperature of fluids. About results of calibrated hot wire, uncertainly of velocity is 2.15% at room temperature and 3.1% at arbitrary temperature.

  • PDF

국민건강보험공단의 요양급여비용 환수과정에 있어서 법적용 정밀성에 관한 검토 -특히 임의비급여를 중심으로- (An Examination of the Exactitude of Legal Application behind the National Health Insurance Corporation's Practice of "Collection and Disbursement" of Paid Medical Expenses (With an Emphasis on Arbitrary Denial of Coverage))

  • 송명호
    • 의료법학
    • /
    • 제13권2호
    • /
    • pp.45-72
    • /
    • 2012
  • The National Health Insurance Corporation has been retrieving from health care providers the payments made to them by insured patients as a result of the health care providers' arbitrary denial of coverage under the National Health Insurance, and has been disbursing such retrieved monies back to the patients, pursuant to Article 57, Sections 1 and 4 of the National Health Insurance Act. However, such practice is an application of the law that lacks legal exactitude. Another problem with such practice is that there is no legal provision under any laws or notices that expressly prohibits arbitrary denial of coverage. A legislative solution, therefore, is called for to address these issues.

  • PDF

산란체에 의한 오프셋 파라볼라 안테나 부엽 왜곡 분석 (Sidelobe Distortion Analysis of Offset Parabolic Antenna by Scatterer)

  • 김승호
    • 한국인터넷방송통신학회논문지
    • /
    • 제18권3호
    • /
    • pp.43-48
    • /
    • 2018
  • 파라볼라 오프셋 안테나는 위성 신호 송수신을 위하여 널리 사용된다. 한편, 파라볼라 안테나를 급전하기 위해 혼 안테나를 파라볼라 안테나로부터 이격된 일정 위치에 고정하여야 한다. 하지만 혼 안테나를 고정하기 위한 구조물에 의해 파라볼라 안테나의 방사 패턴에서 부엽 이득이 왜곡되는 문제점이 있다. 따라서 파라볼라 안테나 설계 시 안테나 방사 패턴에서의 부엽 수준을 예측할 수 있어야한다. 기존 시뮬레이션 방법을 이용하면 장시간이 소요되거나 고가의 소프트웨어가 필요하다. 이를 간단하게 해결하기 위해서 광선 추적기법을 이용하여 파라볼라 오프셋 안테나 지오메트리 상에서 계산하여 고각 부엽 각도를 예측한다. 본 논문에서는 광선추적기법을 이용하여 부엽 각도를 계산하고, 계산된 부엽 각도와 시뮬레이션 결과를 비교하여, 예측 방법의 정합성을 보이며 임의의 산란체의 위치 및 각도에 따라 오프셋 파라볼라 안테나의 고각 패턴에 어떠한 영향을 주는지 확인한다.

A Modification of the Combined Estimator of Inter- and Intra-Block Estimators under an Arbitrary Convex Loss Function

  • Lee, Young-Jo
    • Journal of the Korean Statistical Society
    • /
    • 제16권1호
    • /
    • pp.21-25
    • /
    • 1987
  • The combined estimator of inter- and intra-block estimators in incomplete block designs can be expressed as a weighted average of two location estimators. The weight should be between 0 and 1. However, the negative variance component estimate could result in the weight being negative or larger than 1. In this paper, we show that if two location estimators have symmetric unimodal distributions, truncating the weight to 0 or 1 accordingly improves the combined estimator under an arbitrary convex loss function.

  • PDF

파장 분할 방식 성형 통신망에서 조정 제약을 갖는 전송기를 이용한 전송 스케줄링 (On Transmission Scheduling with Tuning-Limited Transmitters in WDM Star Networks)

  • 최홍식;이경준;김진
    • 한국정보과학회논문지:정보통신
    • /
    • 제29권2호
    • /
    • pp.129-140
    • /
    • 2002
  • 이 논문은 파장 분할 방식을 이용한 광 통신망에서 패킷 전송예약 문제를 다루었다. 통신망은 고정 주파수 수신기와 조절 가능한 송신기를 갖는 모델을 가정했다. 송신기의 레이저는 전체 통신 대역폭이 아닌 제한된 대역폭 내에서 조절 가능한 것을 가정하였다. 따라서 단일 홉 통신망을 만들기 위해서는 각 노드가 복수개의 레이저 혹은 복수개의 광 필터를 장착하고 있어야 한다. 본 논문에서는 먼저 모두에서 모두로의 패킷 전송 문제를 분석하고 최적의 알고리즘을 구했다. 그 다음으로 무작위 통화 요구를 갖는 경우 이 문제가 강한 의미에서 NP-hard임을 보였고 리스트 스케줄링에 기초한 근사 알고리즘을 제안했다. 또한 이 알고리즘이 이론적인 성능 한계와 수치 해석적 방법을 통한 성능을 보였다. 이 결과들은 조절 지연시간, 채널의 수 레이저의 조절범위의 변화에 관계없이 적용 가능하다.

임의의 구멍을 포함하는 B-Spline 곡면상에서의 자동 삼각 요소망 생성 (Automatic Triangular Mesh Generation Over B-Spline Surfaces Including Arbitrary Holes)

  • 김근호;양현익
    • 한국CDE학회논문집
    • /
    • 제9권1호
    • /
    • pp.1-10
    • /
    • 2004
  • In the process of finite element analysis, mesh generation is tedious job which consumes tremendous time. Therefore, the automation of well shaped mesh generation from the minimal boundary input data is desirable to improve reliability and accuracy of the analysis and also to reduce the process time of the entire design process. The automation of triangular mesh generation has been relatively well treated due to its robustness and ease of handling when compared to rectangular element mesh generation. In this study, the offset method developed previously for generating plane rectangular element mesh has been corrected and modified to generate triangular element mesh on the B-spline surface having arbitrary holes. The result shows that the generated triangular mesh has the average aspect ratio over 0.9. The designed arbitrary surface shape has been interactively constructed by non-uniform B-spline theory for triangular mesh generation.

비원형단면에 대한 판재 성형성(II) - 임의단면에 대하여 - (Formability of Sheet Metal in Noncircular Cup Drawing (ll) - for Arbitrary Cross Sections -)

  • 김민수;신재현;서대교
    • 대한기계학회논문집
    • /
    • 제17권12호
    • /
    • pp.3094-3104
    • /
    • 1993
  • The five punch and die sets are selected as the examples of arbitrary cross sections which have two opposite inclined sides. Two kinds of blank shapes are designed for all cross sections. One(h-b1.) is determined by slip-line theory and the other (G-b1.) is determined conventionally as the similar shapes with the cross sections which were used by Gopinathan. As a result of the experimental procedures, the superiority of the blank shapes designed by slip-line theory is verified in the limiting drawing ratio, the uniformity of cup height and the thickness distributions.

NECESSARY CONDITION AND SUFFICIENT CONDITION FOR THE WAVELET FRAMES IN $L^2(R^n)$

  • Wu, Guochang;Zhang, Rui
    • Journal of applied mathematics & informatics
    • /
    • 제28권5_6호
    • /
    • pp.1117-1130
    • /
    • 2010
  • The main goal for this paper is consider the necessary conditions and sufficient conditions of wavelet frames in higher dimensions with an arbitrary expanding matrix dilation. At first, we give a necessary condition of wavelet frame in $L^2(R^n)$, which generalizes the univariate results of Shi from one dimension with an arbitrary real number a(a > 1) dilation to higher dimension with an arbitrary expansive matrix dilation. Secondly, we deduce a necessary condition for wavelet frames in $L^2(R^n)$ when the function $\psi$ satisfies some property of the decay. For the case n = 1, we obtain a corollary which has weaker condition comparing with existing result.